rename subfolder source to src

2018-06-18 14:05:24 +07:00
parent b96e8c6cef
commit 424735d440
70 changed files with 0 additions and 0 deletions
--- a/src/device/dcd.h
+++ b/src/device/dcd.h
@@ -0,0 +1,118 @@
+/**************************************************************************/
+/*!
+    @file     dcd.h
+    @author   hathach (tinyusb.org)
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2013, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+	  This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+/** \ingroup group_usbd
+ * \defgroup group_dcd Device Controller Driver (DCD)
+ *  @{ */
+
+#ifndef _TUSB_DCD_H_
+#define _TUSB_DCD_H_
+
+#include "common/tusb_common.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+typedef enum
+{
+  USBD_BUS_EVENT_RESET = 1,
+  USBD_BUS_EVENT_UNPLUGGED,
+  USBD_BUS_EVENT_SOF,
+  USBD_BUS_EVENT_SUSPENDED,
+  USBD_BUS_EVENT_RESUME
+}usbd_bus_event_type_t;
+
+/*------------------------------------------------------------------*/
+/* Device API (Weak is optional)
+ *------------------------------------------------------------------*/
+bool dcd_init             (uint8_t rhport);
+void dcd_set_address      (uint8_t rhport, uint8_t dev_addr);
+void dcd_set_config       (uint8_t rhport, uint8_t config_num);
+
+void dcd_connect          (uint8_t rhport) ATTR_WEAK;
+void dcd_disconnect       (uint8_t rhport) ATTR_WEAK;
+
+/*------------------------------------------------------------------*/
+/* Event Function
+ * Called by DCD to notify USBD
+ *------------------------------------------------------------------*/
+void dcd_bus_event        (uint8_t rhport, usbd_bus_event_type_t bus_event);
+void dcd_setup_received   (uint8_t rhport, uint8_t const* p_request);
+void dcd_xfer_complete    (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, bool succeeded);
+
+static inline void dcd_control_complete(uint8_t rhport, uint32_t xferred_bytes)
+{
+  // all control complete is successful !!
+  dcd_xfer_complete(rhport, 0, xferred_bytes, true);
+}
+
+/*------------------------------------------------------------------*/
+/* Endpoint API
+ *------------------------------------------------------------------*/
+
+//------------- Non-control Endpoints -------------//
+bool dcd_edpt_open        (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc);
+bool dcd_edpt_xfer        (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);
+bool dcd_edpt_busy        (uint8_t rhport, uint8_t ep_addr);
+
+void dcd_edpt_stall       (uint8_t rhport, uint8_t ep_addr);
+void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr);
+
+//------------- Control Endpoint -------------//
+bool dcd_control_xfer     (uint8_t rhport, tusb_dir_t dir, uint8_t * buffer, uint16_t length);
+
+// Note input dir is value of direction bit in setup packet (i.e DATA stage direction)
+static inline bool dcd_control_status(uint8_t rhport, tusb_dir_t dir)
+{
+  // status direction is reversed to one in the setup packet
+  return dcd_control_xfer(rhport, 1-dir, NULL, 0);
+}
+
+static inline void dcd_control_stall(uint8_t rhport)
+{
+  dcd_edpt_stall(rhport, 0);
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_DCD_H_ */
+
+/// @}