correct setting trace clock

hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h

@@ -8,14 +8,7 @@
 #define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
 #define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
 #define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
-
-#ifdef TRACE_ETM
-// Due to ozone fixed trace clock div = 1, PLL is limited around 100Mhz. This use 128 Mhz
-#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(16U,0U))       /* PLL Mul x16.0 */
-#else
 #define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
-#endif
-
 #define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
 #define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
 #define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
@@ -41,5 +34,4 @@
 #define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
 #define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
 
-
 #endif /* BSP_CLOCK_CFG_H_ */

hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug

@@ -29,9 +29,8 @@ void OnProjectLoad (void) {
 **********************************************************************
 */
 void BeforeTargetConnect (void) {
-  //
   // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
-  //
+	Project.SetJLinkScript("../../../debug.jlinkscript");
 }
 
 /*********************************************************************

hw/bsp/ra/family.c

@@ -49,8 +49,6 @@
 
 /* Key code for writing PRCR register. */
 #define BSP_PRV_PRCR_KEY         (0xA500U)
-#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U)
-#define BSP_PRV_PRCR_LOCK         ((BSP_PRV_PRCR_KEY) | 0x0U)
 
 static const ioport_cfg_t family_pin_cfg = {
     .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t),
@@ -98,10 +96,13 @@ void board_init(void) {
   R_IOPORT_Open(&port_ctrl, &family_pin_cfg);
 
 #ifdef TRACE_ETM
-  // Enable trace clock (max 100Mhz) = PLL / div
+  // TRCKCR is protected by PRCR bit0 register
-  // Somehow ozone/jtrace always fixed trace div to 1 therefore for ETM tracing working reliably
+  R_SYSTEM->PRCR = (uint16_t) (BSP_PRV_PRCR_KEY | 0x01);
-  // PLL is limited around 100Mhz
+
+  // Enable trace clock (max 100Mhz). Since PLL/CPU is 200Mhz, clock div = 2
   R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01;
+
+  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_KEY;
 #endif
 
 #if CFG_TUSB_OS == OPT_OS_FREERTOS

hw/bsp/ra/family.cmake

@@ -37,10 +37,6 @@ function(add_board_target BOARD_TARGET)
       ${FSP_RA}/src/bsp/mcu/all/bsp_security.c
       ${FSP_RA}/src/r_ioport/r_ioport.c
       )
-    # ETM Trace option
-    if (TRACE_ETM STREQUAL "1")
-      target_compile_definitions(${BOARD_TARGET} PUBLIC TRACE_ETM)
-    endif ()
 
     target_compile_options(${BOARD_TARGET} PUBLIC
       -ffreestanding