andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

[osal]add usb host script.

Browse Source
This commit is contained in:
Rbb666
2024-05-11 16:47:15 +08:00
parent e827829850
commit 4cecb759c9
3 changed files with 109 additions and 21 deletions
Download Patch File Download Diff File Expand all files Collapse all files

71
lib/rt-thread/tusb_config.h
View File

@@ -113,6 +113,11 @@ extern "C" {
//--------------------------------------------------------------------
// DEVICE CONFIGURATION
//--------------------------------------------------------------------
#if defined(PKG_TINYUSB_DEVICE_ENABLE)
#define CFG_TUD_ENABLED (1)
#else
#define CFG_TUD_ENABLED (0)
#endif
#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE PKG_TINYUSB_EDPT0_SIZE
@@ -138,6 +143,72 @@ extern "C" {
#define PKG_TINYUSB_DEVICE_HID_STRING ""
#endif
//--------------------------------------------------------------------
// HOST CONFIGURATION
//--------------------------------------------------------------------
#if defined(PKG_TINYUSB_HOST_ENABLE)
#define CFG_TUH_ENABLED (1)
#else
#define CFG_TUH_ENABLED (0)
#endif
#if (PKG_TINYUSB_HOST_PORT == 0)
#undef CFG_TUSB_RHPORT0_MODE
#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED)
#endif
#if (PKG_TINYUSB_HOST_PORT == 1)
#undef CFG_TUSB_RHPORT1_MODE
#define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED)
#endif
#define BOARD_TUH_RHPORT PKG_TINYUSB_HOST_PORT // FULL SPEED
#define BOARD_TUH_MAX_SPEED PKG_TINYUSB_HOST_PORT_SPEED
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED
//------------------------- Board Specific --------------------------
// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
// Size of buffer to hold descriptors and other data used for enumeration
#define CFG_TUH_ENUMERATION_BUFSIZE 256
#define CFG_TUH_HUB 2 // number of supported hubs
#define CFG_TUH_CDC 0 // CDC ACM
#define CFG_TUH_CDC_FTDI 0 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_CDC_CP210X 0 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_CDC_CH34X 0 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_HID 0 // typical keyboard + mouse device can have 3-4 HID interfaces
#define CFG_TUH_MSC 0
//#define CFG_TUH_VENDOR 3
// max device support (excluding hub device): 1 hub typically has 4 ports
#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1)
//------------- HID -------------//
#define CFG_TUH_HID_EPIN_BUFSIZE 64
#define CFG_TUH_HID_EPOUT_BUFSIZE 64
//------------- CDC -------------//
// Set Line Control state on enumeration/mounted:
// DTR ( bit 0), RTS (bit 1)
#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03
// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
// bit rate = 115200, 1 stop bit, no parity, 8 bit data width
#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }
#ifdef __cplusplus
}