add build and project settings for lpc43xx

2012-12-10 15:59:10 +07:00
parent 3eb7465e5e
commit 4ec23ea786
8 changed files with 188 additions and 15 deletions
--- a/demos/bsp/boards/board_ngx4330.c
+++ b/demos/bsp/boards/board_ngx4330.c
@@ -0,0 +1,95 @@
+/*
+ * board_ngx4330.c
+ *
+ *  Created on: Dec 4, 2012
+ *      Author: hathach
+ */
+
+/*
+ * Software License Agreement (BSD License)
+ * Copyright (c) 2012, hathach (tinyusb.net)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the tiny usb stack.
+ */
+
+#include "board.h"
+
+#if BOARD == BOARD_NGX4330
+
+#include "lpc43xx_uart.h"
+#include "lpc43xx_scu.h"
+#include "lpc43xx_cgu.h"
+#include "lpc43xx_gpio.h"
+#include "lpc43xx_timer.h"
+#include "lpc43xx_i2c.h"
+#include "lpc43xx_gpdma.h"
+#include "lpc43xx_i2s.h"
+#include "lpc43xx_emc.h"
+
+#define BOARD_MAX_LEDS  2
+const static struct {
+  uint8_t port;
+  uint8_t pin;
+}leds[BOARD_MAX_LEDS] = { {1, 11}, {1,12} };
+
+void board_init(void)
+{
+  CGU_Init();
+	SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/1000 );	/* 1 ms Timer */
+
+	/* Turn on 5V USB VBUS TODO Should be Host-only */
+	scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4);				// P2_6 USB1_PWR_EN, USB1 VBus function
+	scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2);		// P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION
+
+	/* Turn on 5V USB VBUS TODO Should be Host-only */
+#if 1 //(BOARD == BOARD_XPLORER)
+	scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4);				// P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
+#else
+	scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7);     		// P2_3 USB0_PWR_EN, USB0 VBus function Farnell
+#endif
+
+	// Leds Init
+	uint8_t i;
+	for (i=0; i<BOARD_MAX_LEDS; i++)
+	{
+	  scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
+	  GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
+	}
+}
+
+void board_leds(uint32_t mask, uint32_t state)
+{
+  uint8_t i;
+  for(i=0; i<BOARD_MAX_LEDS; i++)
+  {
+    if ( mask & BIT_(i) )
+	{
+      (mask & state) ? GPIO_SetValue(leds[i].port, BIT_(leds[i].pin)) : GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin)) ;
+	}
+  }
+}
+
+#endif