Merge branch 'master' into cr1901-msp430f5529

examples/device/board_test/src/main.c

@@ -42,7 +42,7 @@ enum  {
   BLINK_UNPRESSED = 1000
 };
 
-#define HELLO_STR   "Hello from TinyUSB\n"
+#define HELLO_STR   "Hello from TinyUSB\r\n"
 
 int main(void)
 {

examples/device/cdc_dual_ports/Makefile

@@ -0,0 +1,12 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+  src \
+  $(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+include ../../rules.mk

examples/device/cdc_dual_ports/src/main.c

@@ -0,0 +1,100 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <ctype.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+//------------- prototypes -------------//
+static void cdc_task(void);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  tusb_init();
+
+  while (1)
+  {
+    tud_task(); // tinyusb device task
+    cdc_task();
+  }
+
+  return 0;
+}
+
+// echo to either Serial0 or Serial1
+// with Serial0 as all lower case, Serial1 as all upper case
+static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count)
+{
+  for(uint32_t i=0; i<count; i++)
+  {
+    if (itf == 0)
+    {
+      // echo back 1st port as lower case
+      if (isupper(buf[i])) buf[i] += 'a' - 'A';
+    }
+    else
+    {
+      // echo back additional ports as upper case
+      if (islower(buf[i])) buf[i] -= 'a' - 'A';
+    }
+
+    tud_cdc_n_write_char(itf, buf[i]);
+
+    if ( buf[i] == '\r' ) tud_cdc_n_write_char(itf, '\n');
+  }
+  tud_cdc_n_write_flush(itf);
+}
+
+//--------------------------------------------------------------------+
+// USB CDC
+//--------------------------------------------------------------------+
+static void cdc_task(void)
+{
+  uint8_t itf;
+
+  for (itf = 0; itf < CFG_TUD_CDC; itf++)
+  {
+    if ( tud_cdc_n_connected(itf) )
+    {
+      if ( tud_cdc_n_available(itf) )
+      {
+        uint8_t buf[64];
+
+        uint32_t count = tud_cdc_n_read(itf, buf, sizeof(buf));
+
+        // echo back to both serial ports
+        echo_serial_port(0, buf, count);
+        echo_serial_port(1, buf, count);
+      }
+    }
+  }
+}

examples/device/cdc_dual_ports/src/tusb_config.h

@@ -0,0 +1,92 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
+#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+#else
+#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+#endif
+
+#define CFG_TUSB_OS                 OPT_OS_NONE
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               2
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE    64
+#define CFG_TUD_CDC_TX_BUFSIZE    64
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

examples/device/cdc_dual_ports/src/usb_descriptors.c

@@ -0,0 +1,165 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]       MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+    // Use Interface Association Descriptor (IAD) for CDC
+    // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
+    .bDeviceClass       = TUSB_CLASS_MISC,
+    .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
+    .bDeviceProtocol    = MISC_PROTOCOL_IAD,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+enum
+{
+  ITF_NUM_CDC1 = 0,
+  ITF_NUM_CDC_DATA1,
+  ITF_NUM_CDC2,
+  ITF_NUM_CDC_DATA2,
+  ITF_NUM_TOTAL
+};
+
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + CFG_TUD_CDC * TUD_CDC_DESC_LEN)
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_CDC     2
+#else
+  #define EPNUM_CDC     2
+#endif
+
+uint8_t const desc_configuration[] =
+{
+  // Interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC1, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, 64),
+
+  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC2, 4, 0x83, 8, EPNUM_CDC + 2, 0x80 | (EPNUM_CDC + 2), 64),
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
+  "TinyUSB",                     // 1: Manufacturer
+  "TinyUSB Device",              // 2: Product
+  "123456",                      // 3: Serials, should use chip ID
+  "TinyUSB CDC",                 // 4: CDC Interface
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void) langid;
+
+  uint8_t chr_count;
+
+  if ( index == 0)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }else
+  {
+    // Convert ASCII string into UTF-16
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = strlen(str);
+    if ( chr_count > 31 ) chr_count = 31;
+
+    for(uint8_t i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+
+  return _desc_str;
+}

examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject

@@ -60,6 +60,7 @@
               <folder Name="src">
                 <file file_name="../../../../../hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c" />
                 <file file_name="../../../../../hw/mcu/nordic/nrfx/drivers/src/nrfx_qspi.c" />
+                <file file_name="../../../../../hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c" />
               </folder>
             </folder>
             <folder Name="hal">

examples/device/cdc_msc/src/main.c

@@ -136,7 +136,7 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts)
   if ( dtr && rts )
   {
     // print initial message when connected
-    tud_cdc_write_str("\r\nTinyUSB CDC MSC HID device example\r\n");
+    tud_cdc_write_str("\r\nTinyUSB CDC MSC device example\r\n");
   }
 }
 

examples/device/cdc_msc/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
@@ -68,6 +68,7 @@
 //--------------------------------------------------------------------
 // DEVICE CONFIGURATION
 //--------------------------------------------------------------------
+
 #ifndef CFG_TUD_ENDPOINT0_SIZE
 #define CFG_TUD_ENDPOINT0_SIZE    64
 #endif

examples/device/cdc_msc/src/usb_descriptors.c

@@ -86,12 +86,32 @@ enum
 
 #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
   // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force
-  // endpoint number for MSC to 5
-  #define EPNUM_MSC   0x05
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  // SAMG doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
 #else
-  #define EPNUM_MSC   0x03
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x03
+  #define EPNUM_MSC_IN      0x83
+
 #endif
 
 uint8_t const desc_configuration[] =
@@ -100,10 +120,10 @@ uint8_t const desc_configuration[] =
   TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, 0x02, 0x82, 64),
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC, 0x80 | EPNUM_MSC, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
 };
 
 
@@ -135,8 +155,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/cdc_msc_freertos/Makefile

@@ -0,0 +1,27 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+FREERTOS_SRC = lib/FreeRTOS/FreeRTOS/Source
+
+INC += \
+	src \
+	$(TOP)/hw \
+	$(TOP)/$(FREERTOS_SRC)/include \
+	$(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)
+	
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# FreeRTOS source, all files in port folder
+SRC_C += \
+	$(FREERTOS_SRC)/list.c \
+	$(FREERTOS_SRC)/queue.c \
+	$(FREERTOS_SRC)/tasks.c \
+	$(FREERTOS_SRC)/timers.c \
+	$(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c))
+
+# FreeRTOS (lto + Os) linker issue
+LDFLAGS += -Wl,--undefined=vTaskSwitchContext
+
+include ../../rules.mk

examples/device/cdc_msc_freertos/src/FreeRTOSConfig.h

@@ -0,0 +1,233 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// for OPT_MCU_
+#include "tusb_option.h"
+
+#if   CFG_TUSB_MCU == OPT_MCU_LPC11UXX   || CFG_TUSB_MCU == OPT_MCU_LPC13XX    || \
+      CFG_TUSB_MCU == OPT_MCU_LPC15XX    || CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || \
+      CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC18XX    || \
+      CFG_TUSB_MCU == OPT_MCU_LPC40XX    || CFG_TUSB_MCU == OPT_MCU_LPC43XX
+  #include "chip.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \
+      CFG_TUSB_MCU == OPT_MCU_LPC55XX
+  #include "fsl_device_registers.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_NRF5X
+  #include "nrf.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMD21 || CFG_TUSB_MCU == OPT_MCU_SAMD51
+  #include "sam.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  #undef LITTLE_ENDIAN // hack to suppress "LITTLE_ENDIAN" redefined
+  #include "sam.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F0
+  #include "stm32f0xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F1
+  #include "stm32f1xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F2
+  #include "stm32f2xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F3
+  #include "stm32f3xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F4
+  #include "stm32f4xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32F7
+  #include "stm32f7xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32H7
+  #include "stm32h7xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32L0
+  #include "stm32l0xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32L1
+  #include "stm32l1xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_STM32L4
+  #include "stm32l4xx.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+  #include "fsl_device_registers.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_NUC120
+  #include "NUC100Series.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_NUC121 || CFG_TUSB_MCU == OPT_MCU_NUC126
+  #include "NuMicro.h"
+
+#elif CFG_TUSB_MCU == OPT_MCU_NUC505
+  #include "NUC505Series.h"
+
+#else
+  #error "FreeRTOSConfig.h need to include low level mcu header for configuration"
+#endif
+
+extern uint32_t SystemCoreClock;
+
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU								        0
+#define configENABLE_FPU								        1
+#define configENABLE_TRUSTZONE					        0
+#define configMINIMAL_SECURE_STACK_SIZE					( 1024 )
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( 0*1024 ) // dynamic is not used
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      0
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+/* Cortex-M specific definitions. __NVIC_PRIO_BITS is defined in core_cmx.h */
+#ifdef __NVIC_PRIO_BITS
+	#define configPRIO_BITS       __NVIC_PRIO_BITS
+#else
+  #error "This port requires __NVIC_PRIO_BITS to be defined"
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif /* __FREERTOS_CONFIG__H */

examples/device/cdc_msc_freertos/src/main.c

@@ -36,8 +36,6 @@
 #include "bsp/board.h"
 #include "tusb.h"
 
-#include "usb_descriptors.h"
-
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
@@ -53,12 +51,24 @@ enum  {
   BLINK_SUSPENDED = 2500,
 };
 
+// static timer
+StaticTimer_t static_blink;
 TimerHandle_t blink_tm;
 
+// static task for usbd
+#define USBD_STACK_SIZE     150
+StackType_t  stack_usbd[USBD_STACK_SIZE];
+StaticTask_t static_task_usbd;
+
+// static task for cdc
+#define CDC_STACK_SZIE      128
+StackType_t  stack_cdc[CDC_STACK_SZIE];
+StaticTask_t static_task_cdc;
+
+
 void led_blinky_cb(TimerHandle_t xTimer);
 void usb_device_task(void* param);
 void cdc_task(void* params);
-void hid_task(void* params);
 
 /*------------- MAIN -------------*/
 int main(void)
@@ -66,21 +76,17 @@ int main(void)
   board_init();
 
   // soft timer for blinky
-  blink_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb);
+  blink_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &static_blink);
   xTimerStart(blink_tm, 0);
 
   tusb_init();
 
   // Create a task for tinyusb device stack
-  xTaskCreate( usb_device_task, "usbd", 150, NULL, configMAX_PRIORITIES-1, NULL);
+  (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, stack_usbd, &static_task_usbd);
 
   // Create task
 #if CFG_TUD_CDC
-  xTaskCreate( cdc_task, "cdc", 128, NULL, configMAX_PRIORITIES-2, NULL);
-#endif
-
-#if CFG_TUD_HID
-  xTaskCreate( hid_task, "hid", 128, NULL, configMAX_PRIORITIES-2, NULL);
+  (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, stack_cdc, &static_task_cdc);
 #endif
 
   vTaskStartScheduler();
@@ -134,6 +140,7 @@ void tud_resume_cb(void)
   xTimerChangePeriod(blink_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0);
 }
 
+
 //--------------------------------------------------------------------+
 // USB CDC
 //--------------------------------------------------------------------+
@@ -189,97 +196,7 @@ void tud_cdc_rx_cb(uint8_t itf)
   (void) itf;
 }
 
-#endif
-
-//--------------------------------------------------------------------+
-// USB HID
-//--------------------------------------------------------------------+
-#if CFG_TUD_HID
-
-void hid_task(void* params)
-{
-  (void) params;
-
-  while (1)
-  {
-    // Poll every 10ms
-    vTaskDelay(pdMS_TO_TICKS(10));
-
-    uint32_t const btn = board_button_read();
-
-    // Remote wakeup
-    if ( tud_suspended() && btn )
-    {
-      // Wake up host if we are in suspend mode
-      // and REMOTE_WAKEUP feature is enabled by host
-      tud_remote_wakeup();
-    }
-
-    /*------------- Mouse -------------*/
-    if ( tud_hid_ready() )
-    {
-      if ( btn )
-      {
-        int8_t const delta = 5;
-
-        // no button, right + down, no scroll pan
-        tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0);
-
-        // delay a bit before attempt to send keyboard report
-        vTaskDelay(pdMS_TO_TICKS(2));
-      }
-    }
-
-    /*------------- Keyboard -------------*/
-    if ( tud_hid_ready() )
-    {
-      // use to avoid send multiple consecutive zero report for keyboard
-      static bool has_key = false;
-
-      if ( btn )
-      {
-        uint8_t keycode[6] = { 0 };
-        keycode[0] = HID_KEY_A;
-
-        tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode);
-
-        has_key = true;
-      }else
-      {
-        // send empty key report if previously has key pressed
-        if (has_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL);
-        has_key = false;
-      }
-    }
-  }
-}
-
-// Invoked when received GET_REPORT control request
-// Application must fill buffer report's content and return its length.
-// Return zero will cause the stack to STALL request
-uint16_t tud_hid_get_report_cb(uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen)
-{
-  // TODO not Implemented
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) reqlen;
-
-  return 0;
-}
-
-// Invoked when received SET_REPORT control request or
-// received data on OUT endpoint ( Report ID = 0, Type = 0 )
-void tud_hid_set_report_cb(uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize)
-{
-  // TODO not Implemented
-  (void) report_id;
-  (void) report_type;
-  (void) buffer;
-  (void) bufsize;
-}
-
-#endif
+#endif // CFG_TUD_CDC
 
 //--------------------------------------------------------------------+
 // BLINKING TASK

examples/device/cdc_msc_freertos/src/msc_disk.c

@@ -220,18 +220,6 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer,
       resplen = 0;
     break;
 
-    case SCSI_CMD_START_STOP_UNIT:
-      // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power
-      /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd;
-        // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well
-        // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage
-        start_stop->start;
-        start_stop->load_eject;
-       */
-       resplen = 0;
-    break;
-
-
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);

examples/device/cdc_msc_freertos/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
@@ -76,7 +76,7 @@
 //------------- CLASS -------------//
 #define CFG_TUD_CDC              1
 #define CFG_TUD_MSC              1
-#define CFG_TUD_HID              1
+#define CFG_TUD_HID              0
 
 #define CFG_TUD_MIDI             0
 #define CFG_TUD_VENDOR           0

examples/device/cdc_msc_freertos/src/usb_descriptors.c

@@ -24,7 +24,6 @@
  */
 
 #include "tusb.h"
-#include "usb_descriptors.h"
 
 /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
  * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
@@ -45,17 +44,11 @@ tusb_desc_device_t const desc_device =
     .bDescriptorType    = TUSB_DESC_DEVICE,
     .bcdUSB             = 0x0200,
 
-  #if CFG_TUD_CDC
     // Use Interface Association Descriptor (IAD) for CDC
     // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
     .bDeviceClass       = TUSB_CLASS_MISC,
     .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
     .bDeviceProtocol    = MISC_PROTOCOL_IAD,
-  #else
-    .bDeviceClass       = 0x00,
-    .bDeviceSubClass    = 0x00,
-    .bDeviceProtocol    = 0x00,
-  #endif
 
     .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
 
@@ -77,84 +70,63 @@ uint8_t const * tud_descriptor_device_cb(void)
   return (uint8_t const *) &desc_device;
 }
 
-//--------------------------------------------------------------------+
-// HID Report Descriptor
-//--------------------------------------------------------------------+
-#if CFG_TUD_HID
-
-uint8_t const desc_hid_report[] =
-{
-  TUD_HID_REPORT_DESC_KEYBOARD( HID_REPORT_ID(REPORT_ID_KEYBOARD), ),
-  TUD_HID_REPORT_DESC_MOUSE   ( HID_REPORT_ID(REPORT_ID_MOUSE), )
-};
-
-// Invoked when received GET HID REPORT DESCRIPTOR
-// Application return pointer to descriptor
-// Descriptor contents must exist long enough for transfer to complete
-uint8_t const * tud_hid_descriptor_report_cb(void)
-{
-  return desc_hid_report;
-}
-
-#endif
-
 //--------------------------------------------------------------------+
 // Configuration Descriptor
 //--------------------------------------------------------------------+
 
 enum
 {
-#if CFG_TUD_CDC
   ITF_NUM_CDC = 0,
   ITF_NUM_CDC_DATA,
-#endif
-
-#if CFG_TUD_MSC
   ITF_NUM_MSC,
-#endif
-
-#if CFG_TUD_HID
-  ITF_NUM_HID,
-#endif
-
   ITF_NUM_TOTAL
 };
 
-#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + CFG_TUD_CDC*TUD_CDC_DESC_LEN + CFG_TUD_MSC*TUD_MSC_DESC_LEN + CFG_TUD_HID*TUD_HID_DESC_LEN)
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
 
 #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
   // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  // Note: since CDC EP ( 1 & 2), HID (4) are spot-on, thus we only need to force
-  // endpoint number for MSC to 5
-  #define EPNUM_MSC   0x05
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x05
+  #define EPNUM_MSC_IN      0x85
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  // SAMG doesn't support a same endpoint number with different direction IN and OUT
+  //    e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x83
+
+  #define EPNUM_MSC_OUT     0x04
+  #define EPNUM_MSC_IN      0x85
+
 #else
-  #define EPNUM_MSC   0x03
+  #define EPNUM_CDC_NOTIF   0x81
+  #define EPNUM_CDC_OUT     0x02
+  #define EPNUM_CDC_IN      0x82
+
+  #define EPNUM_MSC_OUT     0x03
+  #define EPNUM_MSC_IN      0x83
+
 #endif
 
 uint8_t const desc_configuration[] =
 {
-  // interface count, string index, total length, attribute, power in mA
+  // Interface count, string index, total length, attribute, power in mA
   TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
-#if CFG_TUD_CDC
   // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
-  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, 0x02, 0x82, 64),
-#endif
+  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
 
-#if CFG_TUD_MSC
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC, 0x80 | EPNUM_MSC, 64), // highspeed 512
-#endif
-
-#if CFG_TUD_HID
-  // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval
-  TUD_HID_DESCRIPTOR(ITF_NUM_HID, 6, HID_PROTOCOL_NONE, sizeof(desc_hid_report), 0x84, 16, 10)
-#endif
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
 };
 
 
-
 // Invoked when received GET CONFIGURATION DESCRIPTOR
 // Application return pointer to descriptor
 // Descriptor contents must exist long enough for transfer to complete
@@ -177,15 +149,16 @@ char const* string_desc_arr [] =
   "123456",                      // 3: Serials, should use chip ID
   "TinyUSB CDC",                 // 4: CDC Interface
   "TinyUSB MSC",                 // 5: MSC Interface
-  "TinyUSB HID"                  // 6: HID
 };
 
 static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/cdc_msc_hid_freertos/Makefile

@@ -1,26 +0,0 @@
-include ../../../tools/top.mk
-include ../../make.mk
-
-INC += \
-	src \
-	$(TOP)/hw \
-	$(TOP)/lib/FreeRTOS/Source/include \
-	$(TOP)/lib/FreeRTOS/Source/portable/GCC/$(FREERTOS_PORT)
-	
-# Example source
-EXAMPLE_SOURCE += $(wildcard src/*.c)
-SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
-
-# FreeRTOS source
-SRC_C += \
-	lib/FreeRTOS/Source/list.c \
-	lib/FreeRTOS/Source/queue.c \
-	lib/FreeRTOS/Source/tasks.c \
-	lib/FreeRTOS/Source/timers.c \
-	lib/FreeRTOS/Source/portable/MemMang/heap_4.c \
-	lib/FreeRTOS/Source/portable/GCC/$(FREERTOS_PORT)/port.c \
-
-# FreeRTOS (lto + Os) linker issue
-LDFLAGS += -Wl,--undefined=vTaskSwitchContext
-
-include ../../rules.mk

examples/device/dfu_rt/src/tusb_config.h

@@ -21,7 +21,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/dfu_rt/src/usb_descriptors.c

@@ -193,8 +193,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   size_t chr_count;
 
   if ( index == 0)

examples/device/hid_composite/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/hid_composite/src/usb_descriptors.c

@@ -134,8 +134,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/hid_generic_inout/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/hid_generic_inout/src/usb_descriptors.c

@@ -132,8 +132,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/midi_test/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/midi_test/src/usb_descriptors.c

@@ -123,8 +123,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/msc_dual_lun/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/msc_dual_lun/src/usb_descriptors.c

@@ -80,10 +80,20 @@ enum
 
 #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
   // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-  #define EPNUM_MSC   0x02
+  //  0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
+  #define EPNUM_MSC_OUT   0x02
+  #define EPNUM_MSC_IN    0x82
+
+#elif CFG_TUSB_MCU == OPT_MCU_SAMG
+  // SAMG doesn't support a same endpoint number with different direction IN and OUT
+  //  e.g EP1 OUT & EP1 IN cannot exist together
+  #define EPNUM_MSC_OUT   0x01
+  #define EPNUM_MSC_IN    0x82
+
 #else
-  #define EPNUM_MSC   0x01
+  #define EPNUM_MSC_OUT   0x01
+  #define EPNUM_MSC_IN    0x81
+
 #endif
 
 uint8_t const desc_configuration[] =
@@ -92,7 +102,7 @@ uint8_t const desc_configuration[] =
   TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC, 0x80 | EPNUM_MSC, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
 };
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR
@@ -121,8 +131,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)

examples/device/net_lwip_webserver/Makefile

@@ -0,0 +1,57 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+CFLAGS += \
+  -DPBUF_POOL_SIZE=2 \
+  -DTCP_WND=2*TCP_MSS \
+  -DHTTPD_USE_CUSTOM_FSDATA=0
+
+INC += \
+  src \
+  $(TOP)/hw \
+  $(TOP)/lib/lwip/src/include \
+  $(TOP)/lib/lwip/src/include/ipv4 \
+  $(TOP)/lib/lwip/src/include/lwip/apps \
+  $(TOP)/lib/networking
+
+# Example source
+EXAMPLE_SOURCE += $(wildcard src/*.c)
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+SRC_C += \
+  lib/lwip/src/core/altcp.c \
+  lib/lwip/src/core/altcp_alloc.c \
+  lib/lwip/src/core/altcp_tcp.c \
+  lib/lwip/src/core/def.c \
+  lib/lwip/src/core/dns.c \
+  lib/lwip/src/core/inet_chksum.c \
+  lib/lwip/src/core/init.c \
+  lib/lwip/src/core/ip.c \
+  lib/lwip/src/core/mem.c \
+  lib/lwip/src/core/memp.c \
+  lib/lwip/src/core/netif.c \
+  lib/lwip/src/core/pbuf.c \
+  lib/lwip/src/core/raw.c \
+  lib/lwip/src/core/stats.c \
+  lib/lwip/src/core/sys.c \
+  lib/lwip/src/core/tcp.c \
+  lib/lwip/src/core/tcp_in.c \
+  lib/lwip/src/core/tcp_out.c \
+  lib/lwip/src/core/timeouts.c \
+  lib/lwip/src/core/udp.c \
+  lib/lwip/src/core/ipv4/autoip.c \
+  lib/lwip/src/core/ipv4/dhcp.c \
+  lib/lwip/src/core/ipv4/etharp.c \
+  lib/lwip/src/core/ipv4/icmp.c \
+  lib/lwip/src/core/ipv4/igmp.c \
+  lib/lwip/src/core/ipv4/ip4.c \
+  lib/lwip/src/core/ipv4/ip4_addr.c \
+  lib/lwip/src/core/ipv4/ip4_frag.c \
+  lib/lwip/src/netif/ethernet.c \
+  lib/lwip/src/netif/slipif.c \
+  lib/lwip/src/apps/http/httpd.c \
+  lib/lwip/src/apps/http/fs.c \
+  lib/networking/dhserver.c \
+  lib/networking/dnserver.c \
+  lib/networking/rndis_reports.c
+
+include ../../rules.mk

examples/device/net_lwip_webserver/src/arch/cc.h

@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __CC_H__
+#define __CC_H__
+
+//#include "cpu.h"
+
+typedef int sys_prot_t;
+
+
+
+/* define compiler specific symbols */
+#if defined (__ICCARM__)
+
+#define PACK_STRUCT_BEGIN
+#define PACK_STRUCT_STRUCT 
+#define PACK_STRUCT_END
+#define PACK_STRUCT_FIELD(x) x
+#define PACK_STRUCT_USE_INCLUDES
+
+#elif defined (__CC_ARM)
+
+#define PACK_STRUCT_BEGIN __packed
+#define PACK_STRUCT_STRUCT 
+#define PACK_STRUCT_END
+#define PACK_STRUCT_FIELD(x) x
+
+#elif defined (__GNUC__)
+
+#define PACK_STRUCT_BEGIN
+#define PACK_STRUCT_STRUCT __attribute__ ((__packed__))
+#define PACK_STRUCT_END
+#define PACK_STRUCT_FIELD(x) x
+
+#elif defined (__TASKING__)
+
+#define PACK_STRUCT_BEGIN
+#define PACK_STRUCT_STRUCT
+#define PACK_STRUCT_END
+#define PACK_STRUCT_FIELD(x) x
+
+#endif
+
+#define LWIP_PLATFORM_ASSERT(x) do { if(!(x)) while(1); } while(0)
+
+#endif /* __CC_H__ */

examples/device/net_lwip_webserver/src/lwipopts.h

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2001-2003 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Simon Goldschmidt
+ *
+ */
+#ifndef __LWIPOPTS_H__
+#define __LWIPOPTS_H__
+
+/* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */
+#define NO_SYS                          1
+#define MEM_ALIGNMENT                   4
+#define LWIP_RAW                        1
+#define LWIP_NETCONN                    0
+#define LWIP_SOCKET                     0
+#define LWIP_DHCP                       0
+#define LWIP_ICMP                       1
+#define LWIP_UDP                        1
+#define LWIP_TCP                        1
+#define ETH_PAD_SIZE                    0
+#define LWIP_IP_ACCEPT_UDP_PORT(p)      ((p) == PP_NTOHS(67))
+
+#define TCP_MSS                         (1500 /*mtu*/ - 20 /*iphdr*/ - 20 /*tcphhr*/)
+#define TCP_SND_BUF                     (2 * TCP_MSS)
+
+#define ETHARP_SUPPORT_STATIC_ENTRIES   1
+
+#define LWIP_HTTPD_CGI                  0
+#define LWIP_HTTPD_SSI                  0
+#define LWIP_HTTPD_SSI_INCLUDE_TAG      0
+
+#endif /* __LWIPOPTS_H__ */

examples/device/net_lwip_webserver/src/main.c

@@ -0,0 +1,214 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Peter Lawrence
+ *
+ * influenced by lrndis https://github.com/fetisov/lrndis
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/*
+depending on the value of CFG_TUD_NET (tusb_config.h), this can be a CDC-ECM, RNDIS, or CDC-EEM USB virtual network adapter
+
+CDC-ECM should be valid on Linux and MacOS hosts
+RNDIS   should be valid on Linux and Windows hosts
+CDC-EEM should be valid on Linux hosts
+
+You *must* customize tusb_config.h to set the CFG_TUD_NET definition to the type of these network adapters to emulate.
+
+The MCU appears to the host as IP address 192.168.7.1, and provides a DHCP server, DNS server, and web server.
+*/
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+#include "dhserver.h"
+#include "dnserver.h"
+#include "lwip/init.h"
+#include "httpd.h"
+
+/* lwip context */
+static struct netif netif_data;
+
+/* shared between tud_network_recv_cb() and service_traffic() */
+static struct pbuf *received_frame;
+
+/* this is used by this code, ./class/net/net_driver.c, and usb_descriptors.c */
+/* ideally speaking, this should be generated from the hardware's unique ID (if available) */
+const uint8_t tud_network_mac_address[6] = {0x20,0x89,0x84,0x6A,0x96,0x00};
+
+/* network parameters of this MCU */
+static const ip_addr_t ipaddr  = IPADDR4_INIT_BYTES(192, 168, 7, 1);
+static const ip_addr_t netmask = IPADDR4_INIT_BYTES(255, 255, 255, 0);
+static const ip_addr_t gateway = IPADDR4_INIT_BYTES(0, 0, 0, 0);
+
+/* database IP addresses that can be offered to the host; this must be in RAM to store assigned MAC addresses */
+static dhcp_entry_t entries[] =
+{
+  /* mac    ip address        subnet mask        lease time */
+  { {0}, {192, 168, 7, 2}, {255, 255, 255, 0}, 24 * 60 * 60 },
+  { {0}, {192, 168, 7, 3}, {255, 255, 255, 0}, 24 * 60 * 60 },
+  { {0}, {192, 168, 7, 4}, {255, 255, 255, 0}, 24 * 60 * 60 }
+};
+
+/* DHCP configuration parameters, leveraging "entries" above */
+static const dhcp_config_t dhcp_config =
+{
+  {192, 168, 7, 1}, 67,    /* server address (self), port */
+  {192, 168, 7, 1},        /* dns server (self) */
+  "usb",                   /* dns suffix */
+  TU_ARRAY_SIZE(entries),  /* number of entries */
+  entries                  /* pointer to entries */
+};
+
+static err_t linkoutput_fn(struct netif *netif, struct pbuf *p)
+{
+  (void)netif;
+
+  for (;;)
+  {
+    /* if TinyUSB isn't ready, we must signal back to lwip that there is nothing we can do */
+    if (!tud_ready())
+      return ERR_USE;
+
+    /* if the network driver can accept another packet, we make it happen */
+    if (tud_network_can_xmit())
+    {
+      tud_network_xmit(p);
+      return ERR_OK;
+    }
+
+    /* transfer execution to TinyUSB in the hopes that it will finish transmitting the prior packet */
+    tud_task();
+  }
+}
+
+static err_t output_fn(struct netif *netif, struct pbuf *p, const ip_addr_t *addr)
+{
+  return etharp_output(netif, p, addr);
+}
+
+static err_t netif_init_cb(struct netif *netif)
+{
+  LWIP_ASSERT("netif != NULL", (netif != NULL));
+  netif->mtu = CFG_TUD_NET_MTU;
+  netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_LINK_UP | NETIF_FLAG_UP;
+  netif->state = NULL;
+  netif->name[0] = 'E';
+  netif->name[1] = 'X';
+  netif->linkoutput = linkoutput_fn;
+  netif->output = output_fn;
+  return ERR_OK;
+}
+
+static void init_lwip(void)
+{
+  struct netif *netif = &netif_data;
+
+  lwip_init();
+  netif->hwaddr_len = sizeof(tud_network_mac_address);
+  memcpy(netif->hwaddr, tud_network_mac_address, sizeof(tud_network_mac_address));
+
+  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ip_input);
+  netif_set_default(netif);
+}
+
+/* handle any DNS requests from dns-server */
+bool dns_query_proc(const char *name, ip_addr_t *addr)
+{
+  if (0 == strcmp(name, "tiny.usb"))
+  {
+    *addr = ipaddr;
+    return true;
+  }
+  return false;
+}
+
+bool tud_network_recv_cb(struct pbuf *p)
+{
+  /* this shouldn't happen, but if we get another packet before 
+  parsing the previous, we must signal our inability to accept it */
+  if (received_frame) return false;
+
+  /* store away the pointer for service_traffic() to later handle */
+  received_frame = p;
+  return true;
+}
+
+static void service_traffic(void)
+{
+  /* handle any packet received by tud_network_recv_cb() */
+  if (received_frame)
+  {
+    ethernet_input(received_frame, &netif_data);
+    pbuf_free(received_frame);
+    received_frame = NULL;
+    tud_network_recv_renew();
+  }
+}
+
+void tud_network_init_cb(void)
+{
+  /* if the network is re-initializing and we have a leftover packet, we must do a cleanup */
+  if (received_frame)
+  {
+    pbuf_free(received_frame);
+    received_frame = NULL;
+  }
+}
+
+int main(void)
+{
+  /* initialize TinyUSB */
+  board_init();
+  tusb_init();
+
+  /* initialize lwip, dhcp-server, dns-server, and http */
+  init_lwip();
+  while (!netif_is_up(&netif_data));
+  while (dhserv_init(&dhcp_config) != ERR_OK);
+  while (dnserv_init(&ipaddr, 53, dns_query_proc) != ERR_OK);
+  httpd_init();
+
+  while (1)
+  {
+    tud_task();
+    service_traffic();
+  }
+
+  return 0;
+}
+
+/* lwip has provision for using a mutex, when applicable */
+sys_prot_t sys_arch_protect(void)
+{
+  return 0;
+}
+void sys_arch_unprotect(sys_prot_t pval)
+{
+  (void)pval;
+}
+
+/* lwip needs a millisecond time source, and the TinyUSB board support code has one available */
+uint32_t sys_now(void)
+{
+  return board_millis();
+}

examples/device/net_lwip_webserver/src/tusb_config.h

@@ -0,0 +1,90 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
+#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+#else
+#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+#endif
+
+#define CFG_TUSB_OS                 OPT_OS_NONE
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE    64
+#endif
+
+//------------- CLASS -------------//
+#define CFG_TUD_CDC               0
+#define CFG_TUD_MSC               0
+#define CFG_TUD_HID               0
+#define CFG_TUD_MIDI              0
+#define CFG_TUD_VENDOR            0
+//#define CFG_TUD_NET               OPT_NET_ECM
+#define CFG_TUD_NET               OPT_NET_RNDIS
+//#define CFG_TUD_NET               OPT_NET_EEM
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

examples/device/net_lwip_webserver/src/usb_descriptors.c

@@ -0,0 +1,199 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#include "tusb.h"
+#include "usb_descriptors.h"
+
+/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
+ * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
+ *
+ * Auto ProductID layout's Bitmap:
+ *   [MSB]       NET1:NET0 | VENDOR | MIDI | HID | MSC | CDC          [LSB]
+ */
+#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
+#define USB_PID           (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
+                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) | _PID_MAP(NET, 5) )
+
+//--------------------------------------------------------------------+
+// Device Descriptors
+//--------------------------------------------------------------------+
+tusb_desc_device_t const desc_device =
+{
+    .bLength            = sizeof(tusb_desc_device_t),
+    .bDescriptorType    = TUSB_DESC_DEVICE,
+    .bcdUSB             = 0x0200,
+
+    .bDeviceClass       = TUSB_CLASS_UNSPECIFIED,
+    .bDeviceSubClass    = 0,
+    .bDeviceProtocol    = 0,
+    .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
+
+    .idVendor           = 0xCafe,
+    .idProduct          = USB_PID,
+    .bcdDevice          = 0x0100,
+
+    .iManufacturer      = 0x01,
+    .iProduct           = 0x02,
+    .iSerialNumber      = 0x03,
+
+    .bNumConfigurations = 0x01
+};
+
+// Invoked when received GET DEVICE DESCRIPTOR
+// Application return pointer to descriptor
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return (uint8_t const *) &desc_device;
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+enum
+{
+  ITF_NUM_CDC = 0,
+  ITF_NUM_CDC_DATA,
+  ITF_NUM_TOTAL
+};
+
+enum
+{
+  STR_LANGID = 0,
+  STR_MANUFACTURER,
+  STR_PRODUCT,
+  STR_ITFNAME,
+  STR_MAC,
+};
+
+#if CFG_TUD_NET == OPT_NET_ECM
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN)
+#elif CFG_TUD_NET == OPT_NET_RNDIS
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN)
+#elif CFG_TUD_NET == OPT_NET_EEM
+#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_EEM_DESC_LEN)
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_CDC     2
+#else
+  #define EPNUM_CDC     2
+#endif
+
+uint8_t const desc_configuration[] =
+{
+  // Interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 100),
+
+#if CFG_TUD_NET == OPT_NET_ECM
+  // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size.
+  TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STR_ITFNAME, STR_MAC, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU),
+#elif CFG_TUD_NET == OPT_NET_RNDIS
+  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
+  TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STR_ITFNAME, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, CFG_TUD_NET_ENDPOINT_SIZE),
+#elif CFG_TUD_NET == OPT_NET_EEM
+  // Interface number, description string index, EP data address (out, in) and size.
+  TUD_CDC_EEM_DESCRIPTOR(ITF_NUM_CDC, STR_ITFNAME, EPNUM_CDC, 0x80 | EPNUM_CDC, CFG_TUD_NET_ENDPOINT_SIZE),
+#endif
+};
+
+// Invoked when received GET CONFIGURATION DESCRIPTOR
+// Application return pointer to descriptor
+// Descriptor contents must exist long enough for transfer to complete
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  (void) index; // for multiple configurations
+  return desc_configuration;
+}
+
+//--------------------------------------------------------------------+
+// String Descriptors
+//--------------------------------------------------------------------+
+
+// array of pointer to string descriptors
+char const* string_desc_arr [] =
+{
+  [STR_LANGID]       = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409)
+  [STR_MANUFACTURER] = "TinyUSB",                     // Manufacturer
+  [STR_PRODUCT]      = "TinyUSB Device",              // Product
+  [STR_ITFNAME]      =                                // CDC-ECM Interface
+#if CFG_TUD_NET == OPT_NET_ECM
+                       "TinyUSB CDC-ECM",
+#elif CFG_TUD_NET == OPT_NET_RNDIS
+                       "TinyUSB RNDIS",
+#elif CFG_TUD_NET == OPT_NET_EEM
+                       "TinyUSB CDC-EEM",
+#endif
+};
+
+static uint16_t _desc_str[32];
+
+// Invoked when received GET STRING DESCRIPTOR request
+// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
+{
+  (void)langid;
+
+  unsigned chr_count = 0;
+
+  if (STR_LANGID == index)
+  {
+    memcpy(&_desc_str[1], string_desc_arr[0], 2);
+    chr_count = 1;
+  }
+  else if (STR_MAC == index)
+  {
+    // Convert MAC address into UTF-16
+
+    for (unsigned i=0; i<sizeof(tud_network_mac_address); i++)
+    {
+      _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf];
+      _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf];
+    }
+  }
+  else
+  {
+    // Convert ASCII string into UTF-16
+
+    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;
+
+    const char* str = string_desc_arr[index];
+
+    // Cap at max char
+    chr_count = strlen(str);
+    if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1;
+
+    for (unsigned i=0; i<chr_count; i++)
+    {
+      _desc_str[1+i] = str[i];
+    }
+  }
+
+  // first byte is length (including header), second byte is string type
+  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);
+
+  return _desc_str;
+}

examples/device/net_lwip_webserver/src/usb_descriptors.h

@@ -0,0 +1,28 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef USB_DESCRIPTORS_H_
+#define USB_DESCRIPTORS_H_
+
+#endif /* USB_DESCRIPTORS_H_ */

examples/device/usbtmc/src/tusb_config.h

@@ -21,7 +21,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/usbtmc/src/usb_descriptors.c

@@ -216,8 +216,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   size_t chr_count;
 
   if ( index == 0)

examples/device/webusb_serial/src/tusb_config.h

@@ -39,7 +39,7 @@
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
 #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
 #else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE

examples/device/webusb_serial/src/usb_descriptors.c

@@ -204,8 +204,10 @@ static uint16_t _desc_str[32];
 
 // Invoked when received GET STRING DESCRIPTOR request
 // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
-uint16_t const* tud_descriptor_string_cb(uint8_t index)
+uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
 {
+  (void) langid;
+
   uint8_t chr_count;
 
   if ( index == 0)