andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

- spelling fixes to pass ci

Browse Source 
- added mca156 the list in boards.rst.
-  Fixup to family.cmake for mcxa156 to pass ci
This commit is contained in:
Eli Hughes
2025-04-28 07:58:09 -04:00
parent 08ebf1b0f2
commit 538684ac62
4 changed files with 17 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
docs/reference/boards.rst
View File

@@ -165,6 +165,7 @@ lpcxpresso55s28 LPCXpresso55s28 lpc55 ht
lpcxpresso55s69 LPCXpresso55s69 lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK
mcu_link MCU Link lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK
frdm_mcxa153 Freedom MCXA153 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA153
frdm_mcxa156 Freedom MCXA156 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA156
frdm_mcxn947 Freedom MCXN947 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXN947
mcxn947brk MCXN947 Breakout mcx n/a
================== ========================================= ============= ========================================================================================================================================================================= ======

12
hw/bsp/mcx/drivers/spc/fsl_spc.c
View File

@@ -161,7 +161,7 @@ void SPC_SetSRAMOperateVoltage(SPC_Type *base, const spc_sram_voltage_config_t *
* @note To disable bandgap in Active mode:
* 1. Disable all LVD's and HVD's in active mode;
* 2. Disable Glitch detect;
* 3. Configrue LDO's and DCDC to low drive strength in active mode;
* 3. Configure LDO's and DCDC to low drive strength in active mode;
* 4. Invoke this function to disable bandgap in active mode;
* otherwise the error status will be reported.
*
@@ -1115,7 +1115,7 @@ status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_act
return kStatus_SPC_BandgapModeWrong;
}
/* 3. Must disable system LDO high voltage detector before specifing overdrive voltage. */
/* 3. Must disable system LDO high voltage detector before specifying overdrive voltage. */
if ((option->SysLDOVoltage == kSPC_SysLDO_OverDriveVoltage) &&
((SPC_GetActiveModeVoltageDetectStatus(base) & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL))
{
@@ -1138,14 +1138,14 @@ status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_act
* param voltageLevel Specify the voltage level of System LDO Regulator in Active mode.
*
* retval #kStatus_Success Set System LDO Regulator voltage level in Active mode successfully.
* retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifing
* retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifying
* overdrive voltage.
*/
status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel)
{
if (voltageLevel == kSPC_SysLDO_OverDriveVoltage)
{
/* Must disable system LDO high voltage detector before specifing overdrive voltage. */
/* Must disable system LDO high voltage detector before specifying overdrive voltage. */
if ((SPC_GetActiveModeVoltageDetectStatus(base) & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL)
{
return kStatus_SPC_SYSLDOOverDriveVoltageFail;
@@ -1490,7 +1490,7 @@ void SPC_SetDCDCRefreshCount(SPC_Type *base, uint16_t count)
*
*
* @note Some hardware restrictions not covered, application should be aware of this and follow this hardware
* restrictions otherwise some unkown issue may occur:
* restrictions otherwise some unknown issue may occur:
* 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode,
* the voltage level should also set to same value.
* 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set
@@ -1538,7 +1538,7 @@ status_t SPC_SetActiveModeRegulatorsConfig(SPC_Type *base, const spc_active_mode
}
#if (defined(FSL_FEATURE_MCX_SPC_HAS_SYS_LDO) && FSL_FEATURE_MCX_SPC_HAS_SYS_LDO)
/* 2. Must disable system LDO high voltage detector before specifing SysLDO to overdrive voltage */
/* 2. Must disable system LDO high voltage detector before specifying SysLDO to overdrive voltage */
if (((activeModeVDValue & SPC_ACTIVE_CFG_SYS_HVDE_MASK) != 0UL) &&
(config->SysLDOOption.SysLDOVoltage == kSPC_SysLDO_OverDriveVoltage))
{

18
hw/bsp/mcx/drivers/spc/fsl_spc.h
View File

@@ -128,7 +128,7 @@ enum _spc_analog_module_control
};
/*!
* @brief The enumeration of spc power domain, the connected power domain is chip specfic, please refer to chip's RM
* @brief The enumeration of spc power domain, the connected power domain is chip specific, please refer to chip's RM
* for details.
*/
typedef enum _spc_power_domain_id
@@ -153,8 +153,8 @@ typedef enum _spc_power_domain_low_power_mode
*/
typedef enum _spc_lowPower_request_pin_polarity
{
kSPC_HighTruePolarity = 0x0U, /*!< Control the High Polarity of the Low Power Reqest Pin. */
kSPC_LowTruePolarity = 0x1U, /*!< Control the Low Polarity of the Low Power Reqest Pin. */
kSPC_HighTruePolarity = 0x0U, /*!< Control the High Polarity of the Low Power Request Pin. */
kSPC_LowTruePolarity = 0x1U, /*!< Control the Low Polarity of the Low Power Request Pin. */
} spc_lowpower_request_pin_polarity_t;
/*!
@@ -197,7 +197,7 @@ typedef enum _spc_dcdc_voltage_level
/*!
* @brief DCDC regulator Drive Strength enumeration in Active mode or Low Power Mode.
*
* @note Different drive strength differ in these DCDC characterstics:
* @note Different drive strength differ in these DCDC characteristics:
* Maximum load current
* Quiescent current
* Transient response.
@@ -901,7 +901,7 @@ static inline uint32_t SPC_GetActiveModeVoltageDetectStatus(SPC_Type *base)
* @note To disable bandgap in Active mode:
* 1. Disable all LVD's and HVD's in active mode;
* 2. Disable Glitch detect;
* 3. Configrue LDO's and DCDC to low drive strength in active mode;
* 3. Configure LDO's and DCDC to low drive strength in active mode;
* 4. Invoke this function to disable bandgap in active mode;
* otherwise the error status will be reported.
*
@@ -962,7 +962,7 @@ static inline void SPC_SetActiveModeVoltageTrimDelay(SPC_Type *base, uint16_t de
*
*
* @note Some hardware restrictions not covered, application should be aware of this and follow this hardware
* restrictions otherwise some unkown issue may occur:
* restrictions otherwise some unknown issue may occur:
* 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode,
* the voltage level should also set to same value.
* 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set
@@ -1275,7 +1275,7 @@ static inline void SPC_SetLowPowerWakeUpDelay(SPC_Type *base, uint16_t delay)
* parameters do not satisfy hardware restrictions the specific error will be reported.
*
* @note Some hardware restrictions not covered, application should be aware of this and follow this hardware
* restrictions otherwise some unkown issue may occur:
* restrictions otherwise some unknown issue may occur:
* 1. If Core LDO's drive strength are set to same value in both Active mode and low power mode,
* the voltage level should also set to same value.
* 2. When switching Core LDO's drive strength from low to normal, ensure the LDO_CORE high voltage level is set
@@ -2084,7 +2084,7 @@ status_t SPC_SetActiveModeSystemLDORegulatorConfig(SPC_Type *base, const spc_act
* @param voltageLevel Specify the voltage level of System LDO Regulator in Active mode.
*
* @retval #kStatus_Success Set System LDO Regulator voltage level in Active mode successfully.
* @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifing
* @retval #kStatus_SPC_SYSLDOOverDriveVoltageFail Must disable system LDO high voltage detector before specifying
* overdrive voltage.
*/
status_t SPC_SetActiveModeSystemLDORegulatorVoltageLevel(SPC_Type *base, spc_sys_ldo_voltage_level_t voltageLevel);
@@ -2229,7 +2229,7 @@ static inline void SPC_TriggerDCDCBurstRequest(SPC_Type *base)
}
/*!
* @brief Check if burst acknowlege flag is asserted.
* @brief Check if burst acknowledge flag is asserted.
*
* @param base SPC peripheral base address.
*

2
hw/bsp/mcx/family.cmake
View File

@@ -11,7 +11,7 @@ if (MCU_VARIANT STREQUAL "MCXA153")
set(CMAKE_SYSTEM_CPU cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor")
set(FAMILY_MCUS MCXA15 CACHE INTERNAL "")
elseif (MCU_VARIANT STREQUAL "MCXA156")
set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor")
set(FAMILY_MCUS MCXA15 CACHE INTERNAL "")
elseif (MCU_VARIANT STREQUAL "MCXN947")
set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor")