andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

usbh use the new tusb_time_delay_ms_api()

Browse Source 
fix duplicated device attach for some devices which cause "USBH Defer Attach until current enumeration complete"
include dev0 for tuh_edpt_abort_xfer()
This commit is contained in:
hathach
2024-11-04 17:24:49 +07:00
parent 29262f3e24
commit 5f891e020c
3 changed files with 56 additions and 56 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
hw/bsp/board.c
View File

@@ -136,6 +136,6 @@ int board_getchar(void) {
}
uint32_t tusb_time_millis(void) {
uint32_t tusb_time_millis_api(void) {
return board_millis();
}

6
hw/bsp/stm32f7/family.c
View File

@@ -173,7 +173,7 @@ void board_init(void) {
#endif // vbus sense
//------------- rhport1: OTG_HS -------------//
#ifdef USB_HS_PHYC
#ifdef USB_HS_PHYC
// MCU with built-in HS PHY such as F723, F733, F730
/* Configure DM DP Pins */
@@ -197,7 +197,7 @@ void board_init(void) {
/* Enable PHYC Clocks */
__HAL_RCC_OTGPHYC_CLK_ENABLE();
#else
#else
// MCU with external ULPI PHY
/* ULPI CLK */
@@ -243,7 +243,7 @@ void board_init(void) {
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
#endif // USB_HS_PHYC
#endif // USB_HS_PHYC
// Enable USB HS & ULPI Clocks
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();

94
src/host/usbh.c
View File

@@ -278,15 +278,6 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu
static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size);
static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes);
#if CFG_TUSB_OS == OPT_OS_NONE
// TODO rework time-related function later
// weak and overridable
TU_ATTR_WEAK void osal_task_delay(uint32_t msec) {
const uint32_t start = hcd_frame_number(_usbh_controller);
while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {}
}
#endif
TU_ATTR_ALWAYS_INLINE static inline bool queue_event(hcd_event_t const * event, bool in_isr) {
TU_ASSERT(osal_queue_send(_usbh_q, event, in_isr));
tuh_event_hook_cb(event->rhport, event->event_id, in_isr);
@@ -487,6 +478,15 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) {
// due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one.
// TODO better to have an separated queue for newly attached devices
if (_dev0.enumerating) {
// Some device can cause multiple duplicated attach events
// drop current enumerating and start over for a proper port reset
if (event.rhport == _dev0.rhport && event.connection.hub_addr == _dev0.hub_addr &&
event.connection.hub_port == _dev0.hub_port) {
// abort/cancel current enumeration and start new one
TU_LOG1("[%u:] USBH Device Attach (duplicated)\r\n", event.rhport);
tuh_edpt_abort_xfer(0, 0);
enum_new_device(&event);
} else {
TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport);
bool is_empty = osal_queue_empty(_usbh_q);
@@ -496,8 +496,9 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) {
// Exit if this is the only event in the queue, otherwise we may loop forever
return;
}
}
} else {
TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport);
TU_LOG1("[%u:] USBH Device Attach\r\n", event.rhport);
_dev0.enumerating = 1;
enum_new_device(&event);
}
@@ -603,12 +604,12 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) {
TU_VERIFY(xfer->ep_addr == 0 && xfer->setup);
// Check if device is still connected (enumerating for dev0)
uint8_t const daddr = xfer->daddr;
if ( daddr == 0 ) {
if (!_dev0.enumerating) return false;
const uint8_t daddr = xfer->daddr;
if (daddr == 0) {
TU_VERIFY(_dev0.enumerating);
} else {
usbh_device_t const* dev = get_device(daddr);
if (dev && dev->connected == 0) return false;
const usbh_device_t* dev = get_device(daddr);
TU_VERIFY(dev && dev->connected);
}
// pre-check to help reducing mutex lock
@@ -778,24 +779,26 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) {
}
bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) {
TU_LOG_USBH("[%u] Aborted transfer on EP %02X\r\n", daddr, ep_addr);
const uint8_t epnum = tu_edpt_number(ep_addr);
const uint8_t dir = tu_edpt_dir(ep_addr);
if (epnum == 0) {
// Also include dev0 for aborting enumerating
const uint8_t rhport = usbh_get_rhport(daddr);
// control transfer: only 1 control at a time, check if we are aborting the current one
TU_VERIFY(daddr == _ctrl_xfer.daddr && _ctrl_xfer.stage != CONTROL_STAGE_IDLE);
hcd_edpt_abort_xfer(rhport, daddr, ep_addr);
_set_control_xfer_stage(CONTROL_STAGE_IDLE); // reset control transfer state to idle
} else {
usbh_device_t* dev = get_device(daddr);
TU_VERIFY(dev);
TU_LOG_USBH("[%u] Aborted transfer on EP %02X\r\n", daddr, ep_addr);
TU_VERIFY(dev->ep_status[epnum][dir].busy); // non-control skip if not busy
hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr);
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if ( epnum == 0 ) {
// control transfer: only 1 control at a time, check if we are aborting the current one
TU_VERIFY(daddr == _ctrl_xfer.daddr && _ctrl_xfer.stage != CONTROL_STAGE_IDLE);
TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr));
// reset control transfer state to idle
_set_control_xfer_stage(CONTROL_STAGE_IDLE);
} else {
// non-control skip if not busy
TU_VERIFY(dev->ep_status[epnum][dir].busy);
TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr));
// mark as ready and release endpoint if transfer is aborted
dev->ep_status[epnum][dir].busy = false;
tu_edpt_release(&dev->ep_status[epnum][dir], _usbh_mutex);
@@ -1281,8 +1284,8 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu
//--------------------------------------------------------------------+
enum {
ENUM_RESET_DELAY = 50, // USB specs: 10 to 50ms
ENUM_CONTACT_DEBOUNCING_DELAY = 450, // when plug/unplug a device, physical connection can be bouncing and may
ENUM_RESET_DELAY_MS = 50, // USB specs: 10 to 50ms
ENUM_DEBOUNCING_DELAY_MS = 450, // when plug/unplug a device, physical connection can be bouncing and may
// generate a series of attach/detach event. This delay wait for stable connection
};
@@ -1322,7 +1325,7 @@ static void process_enumeration(tuh_xfer_t* xfer) {
bool retry = _dev0.enumerating && (failed_count < ATTEMPT_COUNT_MAX);
if ( retry ) {
failed_count++;
osal_task_delay(ATTEMPT_DELAY_MS); // delay a bit
tusb_time_delay_ms_api(ATTEMPT_DELAY_MS); // delay a bit
TU_LOG1("Enumeration attempt %u\r\n", failed_count);
retry = tuh_control_xfer(xfer);
}
@@ -1364,7 +1367,7 @@ static void process_enumeration(tuh_xfer_t* xfer) {
}
case ENUM_HUB_GET_STATUS_2:
osal_task_delay(ENUM_RESET_DELAY);
tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS);
TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf,
process_enumeration, ENUM_HUB_CLEAR_RESET_2),);
break;
@@ -1402,7 +1405,7 @@ static void process_enumeration(tuh_xfer_t* xfer) {
if (_dev0.hub_addr == 0) {
// connected directly to roothub
hcd_port_reset( _dev0.rhport );
osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since
tusb_time_delay_ms_api(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since
// sof of controller may not running while resetting
hcd_port_reset_end(_dev0.rhport);
// TODO: fall through to SET ADDRESS, refactor later
@@ -1424,9 +1427,9 @@ static void process_enumeration(tuh_xfer_t* xfer) {
case ENUM_GET_DEVICE_DESC: {
// Allow 2ms for address recovery time, Ref USB Spec 9.2.6.3
osal_task_delay(2);
tusb_time_delay_ms_api(2);
uint8_t const new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue);
const uint8_t new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue);
usbh_device_t* new_dev = get_device(new_addr);
TU_ASSERT(new_dev,);
@@ -1514,6 +1517,8 @@ static void process_enumeration(tuh_xfer_t* xfer) {
}
}
static bool enum_new_device(hcd_event_t* event) {
_dev0.rhport = event->rhport;
_dev0.hub_addr = event->connection.hub_addr;
@@ -1522,19 +1527,15 @@ static bool enum_new_device(hcd_event_t* event) {
if (_dev0.hub_addr == 0) {
// connected directly to roothub
hcd_port_reset(_dev0.rhport);
#if CFG_TUSB_OS == OPT_OS_NONE
// Since we are in middle of rhport reset, frame number is not available for time delay
// need to depend on tusb_time_millis() instead
const uint32_t start_reset = tusb_time_millis();
while ((tusb_time_millis() - start_reset) < ENUM_RESET_DELAY) {}
#else
osal_task_delay(ENUM_RESET_DELAY);
#endif
// Since we are in middle of rhport reset, frame number is not available yet.
// need to depend on tusb_time_millis_api()
tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS);
hcd_port_reset_end(_dev0.rhport);
// wait until device connection is stable TODO non blocking
osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY);
tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS);
// device unplugged while delaying
if (!hcd_port_connect_status(_dev0.rhport)) {
@@ -1557,10 +1558,9 @@ static bool enum_new_device(hcd_event_t* event) {
else {
// connected via external hub
// wait until device connection is stable TODO non blocking
osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY);
tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS);
// ENUM_HUB_GET_STATUS
//TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, enum_hub_get_status0_complete, 0) );
TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf,
process_enumeration, ENUM_HUB_CLEAR_RESET_1));
}