update rt1060 and rt1064 evk
This commit is contained in:
hathach
@@ -32,20 +32,17 @@
|
||||
#define BOARD_FLASH_SIZE (0x800000U)
|
||||
|
||||
// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
|
||||
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
|
||||
#define LED_PORT GPIO1
|
||||
#define LED_PIN 9
|
||||
#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL
|
||||
#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
|
||||
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
|
||||
#define BUTTON_PORT GPIO5
|
||||
#define BUTTON_PIN 0
|
||||
#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL
|
||||
#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX
|
||||
#define UART_PORT LPUART1
|
||||
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
|
||||
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
|
||||
#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
||||
497
hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c
Normal file
497
hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c
Normal file
@@ -0,0 +1,497 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v13.1
|
||||
processor: MIMXRT1062xxxxA
|
||||
package_id: MIMXRT1062DVL6A
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 13.0.2
|
||||
board: MIMXRT1060-EVK
|
||||
pin_labels:
|
||||
- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
|
||||
- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_iomuxc.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void) {
|
||||
BOARD_InitPins();
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
}
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
|
||||
- {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
|
||||
|
||||
/* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
|
||||
gpio_pin_config_t USER_LED_config = {
|
||||
.direction = kGPIO_DigitalOutput,
|
||||
.outputLogic = 0U,
|
||||
.interruptMode = kGPIO_NoIntmode
|
||||
};
|
||||
/* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
|
||||
GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
|
||||
|
||||
/* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
|
||||
gpio_pin_config_t USER_BUTTON_config = {
|
||||
.direction = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U,
|
||||
.interruptMode = kGPIO_NoIntmode
|
||||
};
|
||||
/* Initialize GPIO functionality on WAKEUP (pin L6) */
|
||||
GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitDEBUG_UARTPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSDRAMPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
|
||||
- {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
|
||||
- {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
|
||||
- {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
|
||||
- {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
|
||||
- {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
|
||||
- {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
|
||||
- {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
|
||||
- {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
|
||||
- {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
|
||||
- {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
|
||||
- {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
|
||||
- {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
|
||||
- {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
|
||||
- {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
|
||||
- {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
|
||||
- {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
|
||||
- {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
|
||||
- {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
|
||||
- {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
|
||||
- {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
|
||||
- {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
|
||||
- {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
|
||||
- {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
|
||||
- {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
|
||||
- {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
|
||||
- {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
|
||||
- {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
|
||||
- {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
|
||||
- {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
|
||||
- {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
|
||||
- {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
|
||||
- {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
|
||||
- {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
|
||||
- {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
|
||||
- {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
|
||||
- {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
|
||||
- {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
|
||||
- {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29}
|
||||
- {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSDRAMPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitSDRAMPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitCSIPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
|
||||
- {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
|
||||
- {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
|
||||
- {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
|
||||
- {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
|
||||
- {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
|
||||
- {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
|
||||
- {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
|
||||
- {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
|
||||
- {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
|
||||
- {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
|
||||
- {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
|
||||
- {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitCSIPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitCSIPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLCDPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
|
||||
- {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLCDPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitLCDPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
|
||||
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitCANPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
|
||||
- {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitCANPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitCANPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitENETPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
|
||||
- {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
|
||||
- {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
|
||||
- {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
|
||||
- {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
|
||||
- {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
|
||||
- {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
|
||||
- {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
|
||||
- {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
|
||||
- {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitENETPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitENETPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSDHCPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
|
||||
- {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
|
||||
- {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
|
||||
- {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
|
||||
- {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
|
||||
- {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
|
||||
- {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSDHCPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitUSDHCPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitQSPIPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
|
||||
- {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
|
||||
- {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
|
||||
- {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
|
||||
- {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
|
||||
- {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
|
||||
- {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitQSPIPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitQSPIPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
744
hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h
Normal file
744
hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h
Normal file
@@ -0,0 +1,744 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*! @brief Direction type */
|
||||
typedef enum _pin_mux_direction
|
||||
{
|
||||
kPIN_MUX_DirectionInput = 0U, /* Input direction */
|
||||
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
|
||||
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
|
||||
} pin_mux_direction_t;
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */
|
||||
#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITPINS_USER_LED_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO_PIN 9U /*!< GPIO pin number */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_LED_PIN 9U /*!< PORT pin number */
|
||||
#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 9U) /*!< PORT pin mask */
|
||||
|
||||
/* WAKEUP (coord L6), SD_PWREN */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */
|
||||
#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins(void);
|
||||
|
||||
/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void);
|
||||
|
||||
/* GPIO_EMC_09 (coord C2), SEMC_A0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_10 (coord G1), SEMC_A1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_11 (coord G3), SEMC_A2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_12 (coord H1), SEMC_A3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_13 (coord A6), SEMC_A4 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_14 (coord B6), SEMC_A5 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_15 (coord B1), SEMC_A6 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_16 (coord A5), SEMC_A7 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_17 (coord A4), SEMC_A8 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_18 (coord B2), SEMC_A9 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_23 (coord G2), SEMC_A10 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_19 (coord B4), SEMC_A11 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_20 (coord A3), SEMC_A12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_24 (coord D3), SEMC_CAS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_27 (coord A2), SEMC_CKE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_26 (coord B3), SEMC_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_00 (coord E3), SEMC_D0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_01 (coord F3), SEMC_D1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_02 (coord F4), SEMC_D2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_03 (coord G4), SEMC_D3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_04 (coord F2), SEMC_D4 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_05 (coord G5), SEMC_D5 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_06 (coord H5), SEMC_D6 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_07 (coord H4), SEMC_D7 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_30 (coord C6), SEMC_D8 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_31 (coord C5), SEMC_D9 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_32 (coord D5), SEMC_D10 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_33 (coord C4), SEMC_D11 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_34 (coord D4), SEMC_D12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_35 (coord E5), SEMC_D13 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_36 (coord C3), SEMC_D14 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_37 (coord E4), SEMC_D15 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_25 (coord D2), SEMC_RAS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_28 (coord D1), SEMC_WE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_29 (coord E1), SEMC_CS0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_39 (coord B7), SEMC_DQS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSDRAMPins(void);
|
||||
|
||||
#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitCSIPins(void);
|
||||
|
||||
#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_00 (coord D7), LCDIF_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_00 (coord A11), LCDIF_D12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_01 (coord B11), LCDIF_D13 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_02 (coord C11), LCDIF_D14 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_03 (coord D11), LCDIF_D15 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLCDPins(void);
|
||||
|
||||
/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */
|
||||
#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */
|
||||
#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitCANPins(void);
|
||||
|
||||
/* GPIO_EMC_40 (coord A7), ENET_MDC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_41 (coord C7), ENET_MDIO */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_04 (coord E12), ENET_RXD0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_05 (coord D12), ENET_RXD1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_11 (coord C13), ENET_RXER */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_07 (coord B12), ENET_TXD0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_08 (coord A12), ENET_TXD1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_09 (coord A13), ENET_TXEN */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitENETPins(void);
|
||||
|
||||
/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_14 (coord C14), SD0_VSELECT */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSDHCPins(void);
|
||||
|
||||
/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitQSPIPins(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -26,6 +26,10 @@
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>13.0.2</processor_version>
|
||||
<pin_labels>
|
||||
<pin_label pin_num="F14" pin_signal="GPIO_AD_B0_09" label="JTAG_TDI/J21[5]/ENET_RST/J22[5]" identifier="USER_LED"/>
|
||||
<pin_label pin_num="L6" pin_signal="WAKEUP" label="SD_PWREN" identifier="USER_BUTTON"/>
|
||||
</pin_labels>
|
||||
<power_domains/>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
@@ -37,13 +41,40 @@
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins/>
|
||||
<pins>
|
||||
<pin peripheral="GPIO1" signal="gpio_io, 09" pin_num="F14" pin_signal="GPIO_AD_B0_09">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="pull_keeper_select" value="Keeper"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="L6" pin_signal="WAKEUP">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitDEBUG_UARTPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
@@ -717,7 +748,7 @@
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
|
||||
<periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/peripherals.c" update_enabled="true"/>
|
||||
<file path="board/peripherals.h" update_enabled="true"/>
|
||||
|
||||
@@ -31,22 +31,18 @@
|
||||
// required since iMX RT10xx SDK include this file for board size
|
||||
#define BOARD_FLASH_SIZE (0x400000U)
|
||||
|
||||
// LED
|
||||
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
|
||||
#define LED_PORT GPIO1
|
||||
#define LED_PIN 9
|
||||
// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
|
||||
#define LED_PORT BOARD_INITPINS_USER_LED_PERIPHERAL
|
||||
#define LED_PIN BOARD_INITPINS_USER_LED_CHANNEL
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// SW8 button
|
||||
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
|
||||
#define BUTTON_PORT GPIO5
|
||||
#define BUTTON_PIN 0
|
||||
// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
|
||||
#define BUTTON_PORT BOARD_INITPINS_USER_BUTTON_PERIPHERAL
|
||||
#define BUTTON_PIN BOARD_INITPINS_USER_BUTTON_CHANNEL
|
||||
#define BUTTON_STATE_ACTIVE 0
|
||||
|
||||
// UART
|
||||
// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX
|
||||
#define UART_PORT LPUART1
|
||||
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
|
||||
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
|
||||
|
||||
#define UART_CLK_ROOT BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
|
||||
|
||||
#endif /* BOARD_H_ */
|
||||
|
||||
497
hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c
Normal file
497
hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c
Normal file
@@ -0,0 +1,497 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
!!GlobalInfo
|
||||
product: Pins v13.1
|
||||
processor: MIMXRT1064xxxxA
|
||||
package_id: MIMXRT1064DVL6A
|
||||
mcu_data: ksdk2_0
|
||||
processor_version: 13.0.2
|
||||
board: MIMXRT1064-EVK
|
||||
pin_labels:
|
||||
- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
|
||||
- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
#include "fsl_common.h"
|
||||
#include "fsl_iomuxc.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "pin_mux.h"
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitBootPins
|
||||
* Description : Calls initialization functions.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitBootPins(void) {
|
||||
BOARD_InitPins();
|
||||
BOARD_InitDEBUG_UARTPins();
|
||||
}
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
|
||||
- {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
|
||||
|
||||
/* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
|
||||
gpio_pin_config_t USER_LED_config = {
|
||||
.direction = kGPIO_DigitalOutput,
|
||||
.outputLogic = 0U,
|
||||
.interruptMode = kGPIO_NoIntmode
|
||||
};
|
||||
/* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
|
||||
GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
|
||||
|
||||
/* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
|
||||
gpio_pin_config_t USER_BUTTON_config = {
|
||||
.direction = kGPIO_DigitalInput,
|
||||
.outputLogic = 0U,
|
||||
.interruptMode = kGPIO_NoIntmode
|
||||
};
|
||||
/* Initialize GPIO functionality on WAKEUP (pin L6) */
|
||||
GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitDEBUG_UARTPins:
|
||||
- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitDEBUG_UARTPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitDEBUG_UARTPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitSDRAMPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
|
||||
- {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
|
||||
- {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
|
||||
- {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
|
||||
- {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
|
||||
- {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
|
||||
- {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
|
||||
- {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
|
||||
- {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
|
||||
- {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
|
||||
- {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
|
||||
- {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
|
||||
- {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
|
||||
- {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
|
||||
- {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
|
||||
- {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
|
||||
- {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
|
||||
- {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
|
||||
- {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
|
||||
- {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
|
||||
- {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
|
||||
- {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
|
||||
- {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
|
||||
- {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
|
||||
- {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
|
||||
- {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
|
||||
- {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
|
||||
- {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
|
||||
- {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
|
||||
- {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
|
||||
- {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
|
||||
- {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
|
||||
- {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
|
||||
- {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
|
||||
- {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
|
||||
- {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
|
||||
- {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
|
||||
- {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
|
||||
- {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29}
|
||||
- {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitSDRAMPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitSDRAMPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitCSIPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
|
||||
- {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
|
||||
- {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
|
||||
- {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
|
||||
- {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
|
||||
- {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
|
||||
- {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
|
||||
- {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
|
||||
- {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
|
||||
- {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
|
||||
- {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
|
||||
- {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
|
||||
- {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
|
||||
pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
|
||||
- {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitCSIPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitCSIPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitLCDPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
|
||||
- {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
|
||||
- {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitLCDPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitLCDPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
|
||||
IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
|
||||
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
|
||||
(~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
|
||||
| IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
|
||||
);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
|
||||
IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitCANPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
|
||||
- {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitCANPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitCANPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitENETPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
|
||||
- {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
|
||||
- {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
|
||||
- {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
|
||||
- {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
|
||||
- {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
|
||||
- {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
|
||||
- {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
|
||||
- {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
|
||||
- {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitENETPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitENETPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitUSDHCPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
|
||||
- {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
|
||||
- {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
|
||||
- {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
|
||||
- {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
|
||||
- {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
|
||||
- {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitUSDHCPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitUSDHCPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
|
||||
BOARD_InitQSPIPins:
|
||||
- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
|
||||
- pin_list:
|
||||
- {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
|
||||
- {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
|
||||
- {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
|
||||
- {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
|
||||
- {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
|
||||
- {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
|
||||
- {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
|
||||
* BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
|
||||
*/
|
||||
|
||||
/* FUNCTION ************************************************************************************************************
|
||||
*
|
||||
* Function Name : BOARD_InitQSPIPins
|
||||
* Description : Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
* END ****************************************************************************************************************/
|
||||
void BOARD_InitQSPIPins(void) {
|
||||
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
||||
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
|
||||
IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
|
||||
}
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
744
hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h
Normal file
744
hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h
Normal file
@@ -0,0 +1,744 @@
|
||||
/***********************************************************************************************************************
|
||||
* This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
|
||||
* will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#ifndef _PIN_MUX_H_
|
||||
#define _PIN_MUX_H_
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* Definitions
|
||||
**********************************************************************************************************************/
|
||||
|
||||
/*! @brief Direction type */
|
||||
typedef enum _pin_mux_direction
|
||||
{
|
||||
kPIN_MUX_DirectionInput = 0U, /* Input direction */
|
||||
kPIN_MUX_DirectionOutput = 1U, /* Output direction */
|
||||
kPIN_MUX_DirectionInputOrOutput = 2U /* Input or output direction */
|
||||
} pin_mux_direction_t;
|
||||
|
||||
/*!
|
||||
* @addtogroup pin_mux
|
||||
* @{
|
||||
*/
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* API
|
||||
**********************************************************************************************************************/
|
||||
|
||||
#if defined(__cplusplus)
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @brief Calls initialization functions.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitBootPins(void);
|
||||
|
||||
#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITPINS_USER_LED_PERIPHERAL GPIO1 /*!< Peripheral name */
|
||||
#define BOARD_INITPINS_USER_LED_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITPINS_USER_LED_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO GPIO1 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO_PIN 9U /*!< GPIO pin number */
|
||||
#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK (1U << 9U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITPINS_USER_LED_PORT GPIO1 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_LED_PIN 9U /*!< PORT pin number */
|
||||
#define BOARD_INITPINS_USER_LED_PIN_MASK (1U << 9U) /*!< PORT pin mask */
|
||||
|
||||
/* WAKEUP (coord L6), SD_PWREN */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL GPIO5 /*!< Peripheral name */
|
||||
#define BOARD_INITPINS_USER_BUTTON_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITPINS_USER_BUTTON_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO GPIO5 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN 0U /*!< GPIO pin number */
|
||||
#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK (1U << 0U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PORT GPIO5 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PIN 0U /*!< PORT pin number */
|
||||
#define BOARD_INITPINS_USER_BUTTON_PIN_MASK (1U << 0U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitPins(void);
|
||||
|
||||
/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL TX /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL LPUART1 /*!< Peripheral name */
|
||||
#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL RX /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitDEBUG_UARTPins(void);
|
||||
|
||||
/* GPIO_EMC_09 (coord C2), SEMC_A0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_10 (coord G1), SEMC_A1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_11 (coord G3), SEMC_A2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_12 (coord H1), SEMC_A3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_13 (coord A6), SEMC_A4 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_14 (coord B6), SEMC_A5 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_15 (coord B1), SEMC_A6 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_16 (coord A5), SEMC_A7 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_17 (coord A4), SEMC_A8 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_18 (coord B2), SEMC_A9 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_23 (coord G2), SEMC_A10 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_19 (coord B4), SEMC_A11 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_20 (coord A3), SEMC_A12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL ADDR /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL BA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL BA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_24 (coord D3), SEMC_CAS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL semc_cas /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_27 (coord A2), SEMC_CKE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL semc_cke /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_26 (coord B3), SEMC_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL semc_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_00 (coord E3), SEMC_D0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_01 (coord F3), SEMC_D1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_02 (coord F4), SEMC_D2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_03 (coord G4), SEMC_D3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_04 (coord F2), SEMC_D4 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_05 (coord G5), SEMC_D5 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_06 (coord H5), SEMC_D6 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_07 (coord H4), SEMC_D7 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_30 (coord C6), SEMC_D8 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_31 (coord C5), SEMC_D9 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_32 (coord D5), SEMC_D10 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_33 (coord C4), SEMC_D11 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_34 (coord D4), SEMC_D12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_35 (coord E5), SEMC_D13 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL 13U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_36 (coord C3), SEMC_D14 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL 14U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_37 (coord E4), SEMC_D15 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL DATA /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL 15U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL DM /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL DM /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_25 (coord D2), SEMC_RAS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL semc_ras /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_28 (coord D1), SEMC_WE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL semc_we /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_29 (coord E1), SEMC_CS0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL CS /*!< Signal name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_EMC_39 (coord B7), SEMC_DQS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL SEMC /*!< Peripheral name */
|
||||
#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL semc_dqs /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitSDRAMPins(void);
|
||||
|
||||
#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_SIGNAL csi_data /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL csi_pixclk /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL csi_mclk /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL csi_vsync /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL CSI /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL csi_hsync /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL SCL /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL LPI2C1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL SDA /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL GPIO1 /*!< Peripheral name */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO GPIO1 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN 4U /*!< GPIO pin number */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK (1U << 4U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PORT GPIO1 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PIN 4U /*!< PORT pin number */
|
||||
#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK (1U << 4U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitCSIPins(void);
|
||||
|
||||
#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
|
||||
#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
|
||||
|
||||
/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_00 (coord D7), LCDIF_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL lcdif_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL 4U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL 5U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL 6U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL 7U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL 8U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL 9U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL 10U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL 11U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_00 (coord A11), LCDIF_D12 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL 12U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_01 (coord B11), LCDIF_D13 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL 13U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_02 (coord C11), LCDIF_D14 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL 14U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_03 (coord D11), LCDIF_D15 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL lcdif_data /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL 15U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL lcdif_enable /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL lcdif_hsync /*!< Signal name */
|
||||
|
||||
/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL LCDIF /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL lcdif_vsync /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL GPIO2 /*!< Peripheral name */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL gpio_io /*!< Signal name */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL 31U /*!< Signal channel */
|
||||
|
||||
/* Symbols to be used with GPIO driver */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO GPIO2 /*!< GPIO peripheral base pointer */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN 31U /*!< GPIO pin number */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK (1U << 31U) /*!< GPIO pin mask */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT GPIO2 /*!< PORT peripheral base pointer */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN 31U /*!< PORT pin number */
|
||||
#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK (1U << 31U) /*!< PORT pin mask */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitLCDPins(void);
|
||||
|
||||
/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL CAN2 /*!< Peripheral name */
|
||||
#define BOARD_INITCANPINS_CAN2_TX_SIGNAL TX /*!< Signal name */
|
||||
|
||||
/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL CAN2 /*!< Peripheral name */
|
||||
#define BOARD_INITCANPINS_CAN2_RX_SIGNAL RX /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitCANPins(void);
|
||||
|
||||
/* GPIO_EMC_40 (coord A7), ENET_MDC */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_MDC_SIGNAL enet_mdc /*!< Signal name */
|
||||
|
||||
/* GPIO_EMC_41 (coord C7), ENET_MDIO */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL enet_mdio /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL enet_ref_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_04 (coord E12), ENET_RXD0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL enet_rx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_05 (coord D12), ENET_RXD1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL enet_rx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL enet_rx_en /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_11 (coord C13), ENET_RXER */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_RXER_SIGNAL enet_rx_er /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_07 (coord B12), ENET_TXD0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL enet_tx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_08 (coord A12), ENET_TXD1 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL enet_tx_data /*!< Signal name */
|
||||
#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_B1_09 (coord A13), ENET_TXEN */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL ENET /*!< Peripheral name */
|
||||
#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL enet_tx_en /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitENETPins(void);
|
||||
|
||||
/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL 3U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL 2U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL 1U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL usdhc_data /*!< Signal name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL 0U /*!< Signal channel */
|
||||
|
||||
/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL usdhc_cmd /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL usdhc_clk /*!< Signal name */
|
||||
|
||||
/* GPIO_B1_14 (coord C14), SD0_VSELECT */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL USDHC1 /*!< Peripheral name */
|
||||
#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL usdhc_vselect /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitUSDHCPins(void);
|
||||
|
||||
/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL FLEXSPI_A_DATA0 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL FLEXSPI_A_DATA1 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL FLEXSPI_A_DATA2 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL FLEXSPI_A_DATA3 /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL FLEXSPI_A_SCLK /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL FLEXSPI_A_SS0_B /*!< Signal name */
|
||||
|
||||
/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
|
||||
/* Routed pin properties */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL FLEXSPI /*!< Peripheral name */
|
||||
#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL FLEXSPI_A_DQS /*!< Signal name */
|
||||
|
||||
/*!
|
||||
* @brief Configures pin routing and optionally pin electrical features.
|
||||
*
|
||||
*/
|
||||
void BOARD_InitQSPIPins(void);
|
||||
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
/*!
|
||||
* @}
|
||||
*/
|
||||
#endif /* _PIN_MUX_H_ */
|
||||
|
||||
/***********************************************************************************************************************
|
||||
* EOF
|
||||
**********************************************************************************************************************/
|
||||
@@ -26,6 +26,10 @@
|
||||
</generated_project_files>
|
||||
<pins_profile>
|
||||
<processor_version>13.0.2</processor_version>
|
||||
<pin_labels>
|
||||
<pin_label pin_num="F14" pin_signal="GPIO_AD_B0_09" label="JTAG_TDI/J21[5]/ENET_RST/J22[5]" identifier="USER_LED"/>
|
||||
<pin_label pin_num="L6" pin_signal="WAKEUP" label="SD_PWREN" identifier="USER_BUTTON"/>
|
||||
</pin_labels>
|
||||
<power_domains/>
|
||||
</pins_profile>
|
||||
<functions_list>
|
||||
@@ -37,13 +41,40 @@
|
||||
<enableClock>true</enableClock>
|
||||
</options>
|
||||
<dependencies>
|
||||
<dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
|
||||
<feature name="initialized" evaluation="equal">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
<dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
|
||||
<feature name="enabled" evaluation="equal" configuration="core0">
|
||||
<data>true</data>
|
||||
</feature>
|
||||
</dependency>
|
||||
</dependencies>
|
||||
<pins/>
|
||||
<pins>
|
||||
<pin peripheral="GPIO1" signal="gpio_io, 09" pin_num="F14" pin_signal="GPIO_AD_B0_09">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="OUTPUT"/>
|
||||
<pin_feature name="pull_keeper_select" value="Keeper"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
<pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="L6" pin_signal="WAKEUP">
|
||||
<pin_features>
|
||||
<pin_feature name="direction" value="INPUT"/>
|
||||
</pin_features>
|
||||
</pin>
|
||||
</pins>
|
||||
</function>
|
||||
<function name="BOARD_InitDEBUG_UARTPins">
|
||||
<description>Configures pin routing and optionally pin electrical features.</description>
|
||||
@@ -719,7 +750,7 @@
|
||||
</dcdx_profile>
|
||||
<dcdx_configurations/>
|
||||
</dcdx>
|
||||
<periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
|
||||
<periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
|
||||
<generated_project_files>
|
||||
<file path="board/peripherals.c" update_enabled="true"/>
|
||||
<file path="board/peripherals.h" update_enabled="true"/>
|
||||
|
||||
Reference in New Issue
Block a user