Merge pull request #2052 from arduino/renesas_ra_hs_rebased

Renesas_RA: add support for board with HS USB port

examples/device/audio_4_channel_mic/src/main.c

@@ -84,6 +84,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // Init values
   sampFreq = AUDIO_SAMPLE_RATE;
   clkValid = 1;

examples/device/audio_test/src/main.c

@@ -85,6 +85,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // Init values
   sampFreq = AUDIO_SAMPLE_RATE;
   clkValid = 1;

examples/device/audio_test_multi_rate/src/main.c

@@ -99,6 +99,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // Init values
   sampFreq = sampleRatesList[0];
   clkValid = 1;

examples/device/cdc_dual_ports/src/main.c

@@ -42,6 +42,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/cdc_msc/src/main.c

@@ -58,6 +58,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/cdc_msc_freertos/skip.txt

@@ -8,5 +8,6 @@ mcu:RP2040
 mcu:SAMD11
 mcu:SAMX7X
 mcu:VALENTYUSB_EPTRI
+mcu:RAXXX
 family:broadcom_32bit
 family:broadcom_64bit

examples/device/cdc_msc_freertos/src/main.c

@@ -136,6 +136,10 @@ void usb_device_task(void* param)
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // RTOS forever loop
   while (1)
   {

examples/device/dfu/src/main.c

@@ -77,6 +77,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/dfu_runtime/src/main.c

@@ -72,6 +72,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/dynamic_configuration/src/main.c

@@ -59,6 +59,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/hid_boot_interface/src/main.c

@@ -59,6 +59,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/hid_composite/src/main.c

@@ -60,6 +60,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/hid_composite_freertos/skip.txt

@@ -8,5 +8,6 @@ mcu:RP2040
 mcu:SAMD11
 mcu:SAMX7X
 mcu:VALENTYUSB_EPTRI
+mcu:RAXXX
 family:broadcom_32bit
 family:broadcom_64bit

examples/device/hid_composite_freertos/src/main.c

@@ -138,6 +138,10 @@ void usb_device_task(void* param)
   // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API.
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   // RTOS forever loop
   while (1)
   {

examples/device/hid_generic_inout/src/main.c

@@ -83,6 +83,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/hid_multiple_interface/src/main.c

@@ -64,6 +64,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/midi_test/src/main.c

@@ -65,6 +65,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/msc_dual_lun/src/main.c

@@ -57,6 +57,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/net_lwip_webserver/src/main.c

@@ -232,6 +232,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   /* initialize lwip, dhcp-server, dns-server, and http */
   init_lwip();
   while (!netif_is_up(&netif_data));

examples/device/uac2_headset/src/main.c

@@ -105,6 +105,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   TU_LOG1("Headset running\r\n");
 
   while (1)

examples/device/usbtmc/src/main.c

@@ -57,6 +57,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/video_capture/src/main.c

@@ -59,6 +59,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/device/webusb_serial/src/main.c

@@ -96,6 +96,10 @@ int main(void)
   // init device stack on configured roothub port
   tud_init(BOARD_TUD_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/dual/host_hid_to_device_cdc/only.txt

@@ -2,3 +2,4 @@ board:mimxrt1060_evk
 board:mimxrt1064_evk
 board:mcb1800
 mcu:RP2040
+mcu:ra6m5

examples/dual/host_hid_to_device_cdc/src/main.c

@@ -83,6 +83,10 @@ int main(void)
   tud_init(BOARD_TUD_RHPORT);
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     tud_task(); // tinyusb device task

examples/host/bare_api/only.txt

@@ -9,3 +9,4 @@ mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX

examples/host/bare_api/src/main.c

@@ -67,6 +67,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task

examples/host/cdc_msc_hid/only.txt

@@ -9,3 +9,4 @@ mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX

examples/host/cdc_msc_hid/src/main.c

@@ -48,6 +48,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task

examples/host/hid_controller/only.txt

@@ -9,3 +9,4 @@ mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX

examples/host/hid_controller/src/main.c

@@ -54,6 +54,10 @@ int main(void)
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
 
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   while (1)
   {
     // tinyusb host task

examples/host/msc_file_explorer/only.txt

@@ -9,3 +9,4 @@ mcu:MIMXRT11XX
 mcu:RP2040
 mcu:MSP432E4
 mcu:RX65X
+mcu:RAXXX

examples/host/msc_file_explorer/src/main.c

@@ -80,6 +80,11 @@ int main(void)
 
   // init host stack on configured roothub port
   tuh_init(BOARD_TUH_RHPORT);
+
+  if (board_init_after_tusb) {
+    board_init_after_tusb();
+  }
+
   msc_app_init();
 
   while (1)

examples/make.mk

@@ -116,6 +116,8 @@ INC += \
   $(TOP)/$(FAMILY_PATH) \
   $(TOP)/src \
 
+BOARD_UPPER = $(shell echo $(subst -,_,$(BOARD)) | tr a-z A-Z)
+CFLAGS += -DBOARD_$(BOARD_UPPER)
 
 # Log level is mapped to TUSB DEBUG option
 ifneq ($(LOG),)

examples/rules.mk

@@ -88,7 +88,7 @@ linkermap: $(BUILD)/$(PROJECT).elf
 # Flash Targets
 # ---------------------------------------
 
-# Jlink binary
+# --------------- Jlink -----------------
 ifeq ($(OS),Windows_NT)
   JLINKEXE = JLink.exe
 else
@@ -110,10 +110,12 @@ $(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex
 flash-jlink: $(BUILD)/$(BOARD).jlink
 	$(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $<
 
+# --------------- stm32 cube programmer -----------------
 # Flash STM32 MCU using stlink with STM32 Cube Programmer CLI
 flash-stlink: $(BUILD)/$(PROJECT).elf
 	STM32_Programmer_CLI --connect port=swd --write $< --go
 
+# --------------- xfel -----------------
 $(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin
 	$(PYTHON) $(TOP)/tools/mksunxi.py $< $@
 
@@ -121,18 +123,23 @@ flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin
 	xfel spinor write 0 $<
 	xfel reset
 
-# Flash using pyocd
+# --------------- pyocd -----------------
 PYOCD_OPTION ?=
 flash-pyocd: $(BUILD)/$(PROJECT).hex
 	pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $<
 	#pyocd reset -t $(PYOCD_TARGET)
 
-# Flash using openocd
+# --------------- openocd -----------------
 OPENOCD_OPTION ?=
 flash-openocd: $(BUILD)/$(PROJECT).elf
 	openocd $(OPENOCD_OPTION) -c "program $< verify reset exit"
 
-# flash with Black Magic Probe
+# --------------- dfu-util -----------------
+DFU_UTIL_OPTION ?= -a 0
+flash-dfu-util: $(BUILD)/$(PROJECT).bin
+	dfu-util -R $(DFU_UTIL_OPTION) -D $<
+
+# --------------- Black Magic -----------------
 # This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules
 BMP ?= /dev/ttyBmpGdb