andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

able to flash and turn on LED

Browse Source
This commit is contained in:
hathach
2019-07-20 22:38:46 +07:00
parent fa12a0e786
commit 6ec87071ed
3 changed files with 422 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
hw/bsp/stm32f411disco/board_stm32f411disco.c
View File

@@ -27,9 +27,28 @@
#include "../board.h"
#include "stm32f4xx.h"
#include "stm32f4xx_hal_conf.h"
#define LED_PORT GPIOD
#define LED_PIN GPIO_PIN_13
void board_init(void)
{
/* Configure the GPIO_LED pin */
__HAL_RCC_GPIOD_CLK_ENABLE();
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = LED_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
HAL_GPIO_WritePin(LED_PORT, LED_PIN, GPIO_PIN_RESET);
#if 0
// Init the LED on PD14
RCC->AHB1ENR |= RCC_AHB1ENR_GPIODEN;
GPIOD->MODER |= GPIO_MODER_MODE14_0;
@@ -84,6 +103,7 @@ void board_init(void)
// Pullup required on ID, despite the manual claiming there's an
// internal pullup already (page 1245, Rev 17)
GPIOA->PUPDR |= GPIO_PUPDR_PUPD10_0;
#endif
}
//--------------------------------------------------------------------+