implementing dcd_edpt_open
This commit is contained in:
hathach
215
hw/bsp/samg55xplained/hpl_usart_config.h
Normal file
215
hw/bsp/samg55xplained/hpl_usart_config.h
Normal file
@@ -0,0 +1,215 @@
|
||||
/* Auto-generated config file hpl_usart_config.h */
|
||||
#ifndef HPL_USART_CONFIG_H
|
||||
#define HPL_USART_CONFIG_H
|
||||
|
||||
// <<< Use Configuration Wizard in Context Menu >>>
|
||||
|
||||
#include <peripheral_clk_config.h>
|
||||
|
||||
#ifndef CONF_USART_7_ENABLE
|
||||
#define CONF_USART_7_ENABLE 1
|
||||
#endif
|
||||
|
||||
// <h> Basic Configuration
|
||||
|
||||
// <o> Frame parity
|
||||
// <0x0=>Even parity
|
||||
// <0x1=>Odd parity
|
||||
// <0x2=>Parity forced to 0
|
||||
// <0x3=>Parity forced to 1
|
||||
// <0x4=>No parity
|
||||
// <i> Parity bit mode for USART frame
|
||||
// <id> usart_parity
|
||||
#ifndef CONF_USART_7_PARITY
|
||||
#define CONF_USART_7_PARITY 0x4
|
||||
#endif
|
||||
|
||||
// <o> Character Size
|
||||
// <0x0=>5 bits
|
||||
// <0x1=>6 bits
|
||||
// <0x2=>7 bits
|
||||
// <0x3=>8 bits
|
||||
// <i> Data character size in USART frame
|
||||
// <id> usart_character_size
|
||||
#ifndef CONF_USART_7_CHSIZE
|
||||
#define CONF_USART_7_CHSIZE 0x3
|
||||
#endif
|
||||
|
||||
// <o> Stop Bit
|
||||
// <0=>1 stop bit
|
||||
// <1=>1.5 stop bits
|
||||
// <2=>2 stop bits
|
||||
// <i> Number of stop bits in USART frame
|
||||
// <id> usart_stop_bit
|
||||
#ifndef CONF_USART_7_SBMODE
|
||||
#define CONF_USART_7_SBMODE 0
|
||||
#endif
|
||||
|
||||
// <o> Clock Output Select
|
||||
// <0=>The USART does not drive the SCK pin
|
||||
// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK
|
||||
// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK.
|
||||
// <id> usart_clock_output_select
|
||||
#ifndef CONF_USART_7_CLKO
|
||||
#define CONF_USART_7_CLKO 0
|
||||
#endif
|
||||
|
||||
// <o> Baud rate <1-3000000>
|
||||
// <i> USART baud rate setting
|
||||
// <id> usart_baud_rate
|
||||
#ifndef CONF_USART_7_BAUD
|
||||
#define CONF_USART_7_BAUD 9600
|
||||
#endif
|
||||
|
||||
// </h>
|
||||
|
||||
// <e> Advanced configuration
|
||||
// <id> usart_advanced
|
||||
#ifndef CONF_USART_7_ADVANCED_CONFIG
|
||||
#define CONF_USART_7_ADVANCED_CONFIG 0
|
||||
#endif
|
||||
|
||||
// <o> Channel Mode
|
||||
// <0=>Normal Mode
|
||||
// <1=>Automatic Echo
|
||||
// <2=>Local Loopback
|
||||
// <3=>Remote Loopback
|
||||
// <i> Channel mode in USART frame
|
||||
// <id> usart_channel_mode
|
||||
#ifndef CONF_USART_7_CHMODE
|
||||
#define CONF_USART_7_CHMODE 0
|
||||
#endif
|
||||
|
||||
// <q> 9 bits character enable
|
||||
// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits.
|
||||
// <id> usart_9bits_enable
|
||||
#ifndef CONF_USART_7_MODE9
|
||||
#define CONF_USART_7_MODE9 0
|
||||
#endif
|
||||
|
||||
// <o> Variable Sync
|
||||
// <0=>User defined configuration
|
||||
// <1=>sync field is updated when a character is written into US_THR
|
||||
// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter
|
||||
// <id> variable_sync
|
||||
#ifndef CONF_USART_7_VAR_SYNC
|
||||
#define CONF_USART_7_VAR_SYNC 0
|
||||
#endif
|
||||
|
||||
// <o> Oversampling Mode
|
||||
// <0=>16 Oversampling
|
||||
// <1=>8 Oversampling
|
||||
// <i> Oversampling Mode in UART mode
|
||||
// <id> usart__oversampling_mode
|
||||
#ifndef CONF_USART_7_OVER
|
||||
#define CONF_USART_7_OVER 0
|
||||
#endif
|
||||
|
||||
// <o> Inhibit Non Ack
|
||||
// <0=>The NACK is generated
|
||||
// <1=>The NACK is not generated
|
||||
// <i> Inhibit Non Acknowledge
|
||||
// <id> usart__inack
|
||||
#ifndef CONF_USART_7_INACK
|
||||
#define CONF_USART_7_INACK 1
|
||||
#endif
|
||||
|
||||
// <o> Disable Successive NACK
|
||||
// <0=>NACK is sent on the ISO line as soon as a parity error occurs
|
||||
// <1=>Many parity errors generate a NACK on the ISO line
|
||||
// <i> Disable Successive NACK
|
||||
// <id> usart_dsnack
|
||||
#ifndef CONF_USART_7_DSNACK
|
||||
#define CONF_USART_7_DSNACK 0
|
||||
#endif
|
||||
|
||||
// <o> Inverted Data
|
||||
// <0=>Data isn't inverted, nomal mode
|
||||
// <1=>Data is inverted
|
||||
// <i> Inverted Data
|
||||
// <id> usart_invdata
|
||||
#ifndef CONF_USART_7_INVDATA
|
||||
#define CONF_USART_7_INVDATA 0
|
||||
#endif
|
||||
|
||||
// <o> Maximum Number of Automatic Iteration <0-7>
|
||||
// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0.
|
||||
// <id> usart_max_iteration
|
||||
#ifndef CONF_USART_7_MAX_ITERATION
|
||||
#define CONF_USART_7_MAX_ITERATION 0
|
||||
#endif
|
||||
|
||||
// <q> Receive Line Filter enable
|
||||
// <i> whether the USART filters the receive line using a three-sample filter
|
||||
// <id> usart_receive_filter_enable
|
||||
#ifndef CONF_USART_7_FILTER
|
||||
#define CONF_USART_7_FILTER 0
|
||||
#endif
|
||||
|
||||
// <q> Manchester Encoder/Decoder Enable
|
||||
// <i> whether the USART Manchester Encoder/Decoder
|
||||
// <id> usart_manchester_filter_enable
|
||||
#ifndef CONF_USART_7_MAN
|
||||
#define CONF_USART_7_MAN 0
|
||||
#endif
|
||||
|
||||
// <o> Manchester Synchronization Mode
|
||||
// <0=>The Manchester start bit is a 0 to 1 transition
|
||||
// <1=>The Manchester start bit is a 1 to 0 transition
|
||||
// <i> Manchester Synchronization Mode
|
||||
// <id> usart_manchester_synchronization_mode
|
||||
#ifndef CONF_USART_7_MODSYNC
|
||||
#define CONF_USART_7_MODSYNC 0
|
||||
#endif
|
||||
|
||||
// <o> Start Frame Delimiter Selector
|
||||
// <0=>Start frame delimiter is COMMAND or DATA SYNC
|
||||
// <1=>Start frame delimiter is one bit
|
||||
// <i> Start Frame Delimiter Selector
|
||||
// <id> usart_start_frame_delimiter
|
||||
#ifndef CONF_USART_7_ONEBIT
|
||||
#define CONF_USART_7_ONEBIT 0
|
||||
#endif
|
||||
|
||||
// <o> Fractional Part <0-7>
|
||||
// <i> Fractional part of the baud rate if baud rate generator is in fractional mode
|
||||
// <id> usart_arch_fractional
|
||||
#ifndef CONF_USART_7_FRACTIONAL
|
||||
#define CONF_USART_7_FRACTIONAL 0x0
|
||||
#endif
|
||||
|
||||
// <o> Data Order
|
||||
// <0=>LSB is transmitted first
|
||||
// <1=>MSB is transmitted first
|
||||
// <i> Data order of the data bits in the frame
|
||||
// <id> usart_arch_msbf
|
||||
#ifndef CONF_USART_7_MSBF
|
||||
#define CONF_USART_7_MSBF 0
|
||||
#endif
|
||||
|
||||
// </e>
|
||||
|
||||
#define CONF_USART_7_MODE 0x0
|
||||
|
||||
// Calculate BAUD register value in UART mode
|
||||
#if CONF_FLEXCOM7_CK_SRC < 3
|
||||
#ifndef CONF_USART_7_BAUD_CD
|
||||
#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER))
|
||||
#endif
|
||||
#ifndef CONF_USART_7_BAUD_FP
|
||||
#define CONF_USART_7_BAUD_FP \
|
||||
((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD)
|
||||
#endif
|
||||
#elif CONF_FLEXCOM7_CK_SRC == 3
|
||||
// No division is active. The value written in US_BRGR has no effect.
|
||||
#ifndef CONF_USART_7_BAUD_CD
|
||||
#define CONF_USART_7_BAUD_CD 1
|
||||
#endif
|
||||
#ifndef CONF_USART_7_BAUD_FP
|
||||
#define CONF_USART_7_BAUD_FP 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// <<< end of configuration section >>>
|
||||
|
||||
#endif // HPL_USART_CONFIG_H
|
||||
85
hw/bsp/samg55xplained/peripheral_clk_config.h
Normal file
85
hw/bsp/samg55xplained/peripheral_clk_config.h
Normal file
@@ -0,0 +1,85 @@
|
||||
/* Auto-generated config file peripheral_clk_config.h */
|
||||
#ifndef PERIPHERAL_CLK_CONFIG_H
|
||||
#define PERIPHERAL_CLK_CONFIG_H
|
||||
|
||||
// <<< Use Configuration Wizard in Context Menu >>>
|
||||
|
||||
/**
|
||||
* \def CONF_HCLK_FREQUENCY
|
||||
* \brief HCLK's Clock frequency
|
||||
*/
|
||||
#ifndef CONF_HCLK_FREQUENCY
|
||||
#define CONF_HCLK_FREQUENCY 8000000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \def CONF_FCLK_FREQUENCY
|
||||
* \brief FCLK's Clock frequency
|
||||
*/
|
||||
#ifndef CONF_FCLK_FREQUENCY
|
||||
#define CONF_FCLK_FREQUENCY 8000000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \def CONF_CPU_FREQUENCY
|
||||
* \brief CPU's Clock frequency
|
||||
*/
|
||||
#ifndef CONF_CPU_FREQUENCY
|
||||
#define CONF_CPU_FREQUENCY 8000000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \def CONF_SLCK_FREQUENCY
|
||||
* \brief Slow Clock frequency
|
||||
*/
|
||||
#define CONF_SLCK_FREQUENCY 32768
|
||||
|
||||
/**
|
||||
* \def CONF_MCK_FREQUENCY
|
||||
* \brief Master Clock frequency
|
||||
*/
|
||||
#define CONF_MCK_FREQUENCY 8000000
|
||||
|
||||
// <o> USB Clock Source
|
||||
// <0=> USB Clock Controller (USB_48M)
|
||||
// <id> usb_clock_source
|
||||
// <i> Select the clock source for USB.
|
||||
#ifndef CONF_UDP_SRC
|
||||
#define CONF_UDP_SRC 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* \def CONF_UDP_FREQUENCY
|
||||
* \brief UDP's Clock frequency
|
||||
*/
|
||||
#ifndef CONF_UDP_FREQUENCY
|
||||
#define CONF_UDP_FREQUENCY 48005120
|
||||
#endif
|
||||
|
||||
// <h> FLEXCOM Clock Settings
|
||||
// <o> FLEXCOM Clock source
|
||||
// <0=> Master Clock (MCK)
|
||||
// <1=> MCK / 8
|
||||
// <2=> Programmable Clock Controller 6 (PMC_PCK6)
|
||||
// <2=> Programmable Clock Controller 7 (PMC_PCK7)
|
||||
// <3=> External Clock
|
||||
// <i> This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7
|
||||
// <id> flexcom_clock_source
|
||||
#ifndef CONF_FLEXCOM7_CK_SRC
|
||||
#define CONF_FLEXCOM7_CK_SRC 0
|
||||
#endif
|
||||
|
||||
// <o> FLEXCOM External Clock Input on SCK <1-4294967295>
|
||||
// <i> Inputs the external clock frequency on SCK
|
||||
// <id> flexcom_clock_freq
|
||||
#ifndef CONF_FLEXCOM7_SCK_FREQ
|
||||
#define CONF_FLEXCOM7_SCK_FREQ 10000000
|
||||
#endif
|
||||
|
||||
#ifndef CONF_FLEXCOM7_FREQUENCY
|
||||
#define CONF_FLEXCOM7_FREQUENCY 8000000
|
||||
#endif
|
||||
|
||||
// <<< end of configuration section >>>
|
||||
|
||||
#endif // PERIPHERAL_CLK_CONFIG_H
|
||||
Reference in New Issue
Block a user