andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge branch 'master' into develop

Browse Source
This commit is contained in:
hathach
2019-10-02 12:13:47 +07:00
committed by GitHub
parent 0673be7724 d84a31fd5f
commit 820a3705f5
2 changed files with 32 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
View File

@@ -252,7 +252,9 @@ void dcd_init (uint8_t rhport)
void dcd_int_enable (uint8_t rhport)
{
(void)rhport;
// Member here forces write to RAM before allowing ISR to execute
__DSB();
__ISB();
#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0
NVIC_EnableIRQ(USB_IRQn);
#elif CFG_TUSB_MCU == OPT_MCU_STM32F3
@@ -287,10 +289,7 @@ void dcd_int_disable(uint8_t rhport)
#error Unknown arch in USB driver
#endif
// I'm not convinced that memory synchronization is completely necessary, but
// it isn't a bad idea.
__DSB();
__ISB();
// CMSIS has a membar after disabling interrupts
}
// Receive Set Address request, mcu port must also include status IN response
@@ -430,10 +429,15 @@ static uint16_t dcd_ep_ctr_handler(void)
uint8_t userMemBuf[8];
/* Get SETUP Packet*/
count = pcd_get_ep_rx_cnt(USB, EPindex);
//TU_ASSERT_ERR(count == 8);
dcd_read_packet_memory(userMemBuf, *pcd_ep_rx_address_ptr(USB,EPindex), 8);
if(count == 8) // Setup packet should always be 8 bytes. If not, ignore it, and try again.
{
// Must reset EP to NAK (in case it had been stalling) (though, maybe too late here)
pcd_set_ep_rx_status(USB,0u,USB_EP_RX_NAK);
pcd_set_ep_tx_status(USB,0u,USB_EP_TX_NAK);
dcd_read_packet_memory(userMemBuf, *pcd_ep_rx_address_ptr(USB,EPindex), 8);
dcd_event_setup_received(0, (uint8_t*)userMemBuf, true);
}
/* SETUP bit kept frozen while CTR_RX = 1*/
dcd_event_setup_received(0, (uint8_t*)userMemBuf, true);
pcd_clear_rx_ep_ctr(USB, EPindex);
}
else if ((wEPVal & USB_EP_CTR_RX) != 0U) // OUT
@@ -451,10 +455,6 @@ static uint16_t dcd_ep_ctr_handler(void)
}
/* Process Control Data OUT status Packet*/
if(EPindex == 0u && xfer->total_len == 0u)
{
pcd_clear_ep_kind(USB,0); // Good, so allow non-zero length packets now.
}
dcd_event_xfer_complete(0, EPindex, xfer->total_len, XFER_RESULT_SUCCESS, true);
pcd_set_ep_rx_cnt(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE);
@@ -638,7 +638,9 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc
}
pcd_set_ep_address(USB, epnum, epnum);
pcd_clear_ep_kind(USB,0); // Be normal, for now, instead of only accepting zero-byte packets
// Be normal, for now, instead of only accepting zero-byte packets (on control endpoint)
// or being double-buffered (bulk endpoints)
pcd_clear_ep_kind(USB,0);
if(dir == TUSB_DIR_IN)
{
@@ -699,7 +701,6 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
if (epnum == 0 && buffer == NULL)
{
xfer->buffer = (uint8_t*)_setup_packet;
pcd_set_ep_kind(USB,0); // Expect a zero-byte INPUT
}
if(total_bytes > xfer->max_packet_size)
{