Add weact blackpill support

hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.cmake

@@ -0,0 +1,8 @@
+set(MCU_VARIANT AT32F403ACGU7)
+set(MCU_LINKER_NAME AT32F403AxG)
+
+set(JLINK_DEVICE ${MCU_VARIANT})
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC ${MCU_VARIANT})
+endfunction()

hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.h

@@ -0,0 +1,67 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: WeAct Studio BlackPill AT32F403ACGx
+   url: https://github.com/WeActStudio/WeActStudio.BlackPill
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOC
+#define LED_PIN               GPIO_PINS_13
+#define LED_STATE_ON          0 // Active Low
+#define LED_GPIO_CLK_EN()     crm_periph_clock_enable(CRM_GPIOC_PERIPH_CLOCK, TRUE)
+
+// Button
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PINS_0
+#define BUTTON_PULL           GPIO_PULL_UP
+#define BUTTON_STATE_ACTIVE   0
+#define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
+
+// UART
+#define PRINT_UART                       USART1
+#define PRINT_UART_CRM_CLK               CRM_USART1_PERIPH_CLOCK
+#define PRINT_UART_TX_PIN                GPIO_PINS_9
+#define PRINT_UART_TX_GPIO               GPIOA
+#define PRINT_UART_TX_GPIO_CRM_CLK       CRM_GPIOA_PERIPH_CLOCK
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

hw/bsp/at32f403a_407/boards/at32f403a_weact_blackpill/board.mk

@@ -0,0 +1,7 @@
+MCU_VARIANT = AT32F403ACGU7
+MCU_LINKER_NAME = AT32F403AxG
+
+JLINK_DEVICE = ${MCU_VARIANT}
+
+CFLAGS += \
+  -D${MCU_VARIANT}

hw/bsp/at32f403a_407/boards/at_start_f403a/board.h

@@ -50,7 +50,8 @@
 // Button
 #define BUTTON_PORT           GPIOA
 #define BUTTON_PIN            GPIO_PINS_0
-#define BUTTON_STATE_ACTIVE   0
+#define BUTTON_PULL           GPIO_PULL_DOWN
+#define BUTTON_STATE_ACTIVE   1
 #define BUTTON_GPIO_CLK_EN()  crm_periph_clock_enable(CRM_GPIOA_PERIPH_CLOCK, TRUE)
 
 // UART

hw/bsp/at32f403a_407/family.c

@@ -102,7 +102,7 @@ void board_init(void) {
   gpio_button_init_struct.gpio_out_type = GPIO_OUTPUT_PUSH_PULL;
   gpio_button_init_struct.gpio_mode = GPIO_MODE_INPUT;
   gpio_button_init_struct.gpio_pins = BUTTON_PIN;
-  gpio_button_init_struct.gpio_pull = GPIO_PULL_DOWN;
+  gpio_button_init_struct.gpio_pull = BUTTON_PULL;
   gpio_init(BUTTON_PORT, &gpio_button_init_struct);
 
   uart_print_init(115200);
@@ -198,7 +198,7 @@ void board_led_write(bool state) {
 }
 
 uint32_t board_button_read(void) {
-  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN);
+  return gpio_input_data_bit_read(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE;
 }
 
 size_t board_get_unique_id(uint8_t id[], size_t max_len) {