rhport argument in usbd_ API() is not used (always use the initialized port)

remove the usage of TUD_OPT_RHPORT in class driver

src/device/usbd.c

@@ -428,7 +428,6 @@ bool tud_init (uint8_t rhport)
   dcd_init(rhport);
   dcd_int_enable(rhport);
 
-
   return true;
 }
 
@@ -1199,6 +1198,8 @@ void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr)
 
 bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
 {
+  rhport = _usbd_rhport;
+
   TU_ASSERT(tu_edpt_number(desc_ep->bEndpointAddress) < CFG_TUD_ENDPPOINT_MAX);
   TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed));
 
@@ -1240,6 +1241,8 @@ bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr)
 
 bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
@@ -1275,6 +1278,8 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
 // into the USB buffer!
 bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
@@ -1314,6 +1319,7 @@ bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
 
 void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
@@ -1330,6 +1336,8 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 
 void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
@@ -1361,6 +1369,8 @@ bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr)
  */
 void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
+
   TU_ASSERT(dcd_edpt_close, /**/);
   TU_LOG2("  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
 
@@ -1377,6 +1387,8 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
 
 void usbd_sof_enable(uint8_t rhport, bool en)
 {
+  rhport = _usbd_rhport;
+
   // TODO: Check needed if all drivers including the user sof_cb does not need an active SOF ISR any more.
   // Only if all drivers switched off SOF calls the SOF interrupt may be disabled
   dcd_sof_enable(rhport, en);