move mcu cmsis file to /mcu

mcu/lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_iap.h

@@ -0,0 +1,153 @@
+/**********************************************************************
+* $Id$      lpc17xx_iap.h           2012-04-18
+*//**
+* @file     lpc17xx_iap.h
+* @brief    Contains all functions support for IAP
+*           on lpc17xx
+* @version  1.0
+* @date     18. April. 2012
+* @author   NXP MCU SW Application Team
+* 
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers.  This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+**********************************************************************/
+
+#ifndef _LPC17xx_IAP_H
+#define _LPC17xx_IAP_H
+#include "lpc_types.h"
+
+/** @defgroup IAP   IAP (In Application Programming)
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+/** @defgroup IAP_Public_Macros IAP Public Macros
+ * @{
+ */
+
+/** IAP entry location */
+#define IAP_LOCATION              (0x1FFF1FF1UL)
+
+/**
+ * @}
+ */
+
+/** @defgroup IAP_Public_Types IAP Public Types
+ * @{
+ */
+
+/**
+ * @brief IAP command code definitions
+ */
+typedef enum
+{
+    IAP_PREPARE = 50,       // Prepare sector(s) for write operation
+    IAP_COPY_RAM2FLASH = 51,     // Copy RAM to Flash
+    IAP_ERASE = 52,              // Erase sector(s)
+    IAP_BLANK_CHECK = 53,        // Blank check sector(s)
+    IAP_READ_PART_ID = 54,       // Read chip part ID
+    IAP_READ_BOOT_VER = 55,      // Read chip boot code version
+    IAP_COMPARE = 56,            // Compare memory areas
+    IAP_REINVOKE_ISP = 57,       // Reinvoke ISP
+    IAP_READ_SERIAL_NUMBER = 58, // Read serial number
+}  IAP_COMMAND_CODE;
+
+/**
+ * @brief IAP status code definitions
+ */
+typedef enum
+{
+    CMD_SUCCESS,                 // Command is executed successfully.
+    INVALID_COMMAND,             // Invalid command.
+    SRC_ADDR_ERROR,              // Source address is not on a word boundary.
+    DST_ADDR_ERROR,              // Destination address is not on a correct boundary.
+    SRC_ADDR_NOT_MAPPED,         // Source address is not mapped in the memory map.
+    DST_ADDR_NOT_MAPPED,         // Destination address is not mapped in the memory map.
+    COUNT_ERROR,                   // Byte count is not multiple of 4 or is not a permitted value.
+    INVALID_SECTOR,            // Sector number is invalid.
+    SECTOR_NOT_BLANK,              // Sector is not blank.
+    SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION,    // Command to prepare sector for write operation was not executed.
+    COMPARE_ERROR,               // Source and destination data is not same.
+    BUSY,                          // Flash programming hardware interface is busy.
+} IAP_STATUS_CODE;
+
+/**
+ * @brief IAP write length definitions
+ */
+typedef enum {
+  IAP_WRITE_256  = 256,
+  IAP_WRITE_512  = 512,
+  IAP_WRITE_1024 = 1024,
+  IAP_WRITE_4096 = 4096,
+} IAP_WRITE_SIZE;
+
+/**
+ * @brief IAP command structure
+ */
+typedef struct {
+    uint32_t cmd;   // Command
+    uint32_t param[4];      // Parameters
+    uint32_t status;        // status code
+    uint32_t result[4];     // Result
+} IAP_COMMAND_Type;
+
+/**
+ * @}
+ */
+ 
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup IAP_Public_Functions IAP Public Functions
+ * @{
+ */
+
+/**  Get sector number of an address */
+uint32_t GetSecNum (uint32_t adr);
+/**  Prepare sector(s) for write operation */
+IAP_STATUS_CODE PrepareSector(uint32_t start_sec, uint32_t end_sec);
+/**  Copy RAM to Flash */
+IAP_STATUS_CODE CopyRAM2Flash(uint8_t * dest, uint8_t* source, IAP_WRITE_SIZE size);
+/**  Prepare sector(s) for write operation */
+IAP_STATUS_CODE EraseSector(uint32_t start_sec, uint32_t end_sec);
+/**  Blank check sectors */
+IAP_STATUS_CODE BlankCheckSector(uint32_t start_sec, uint32_t end_sec,
+                                 uint32_t *first_nblank_loc, 
+                                 uint32_t *first_nblank_val);
+/**  Read part identification number */
+IAP_STATUS_CODE ReadPartID(uint32_t *partID);
+/**  Read boot code version */
+IAP_STATUS_CODE ReadBootCodeVer(uint8_t *major, uint8_t* minor);
+/**  Read Device serial number */
+IAP_STATUS_CODE ReadDeviceSerialNum(uint32_t *uid);
+/**  Compare memory */
+IAP_STATUS_CODE Compare(uint8_t *addr1, uint8_t *addr2, uint32_t size);
+/**  Invoke ISP */
+void InvokeISP(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /*_LPC17xx_IAP_H*/
+