move mcu cmsis file to /mcu

mcu/lpc43xx/CMSIS_LPC43xx_DriverLib/inc/lpc43xx_sdmmc.h

@@ -0,0 +1,124 @@
+/**********************************************************************
+* $Id$		lpc43xx_sdmmc.h		2012-Aug-15
+*//**
+* @file		lpc43xx_sdmmc.h
+* @brief	SD/MMC card access and data driver
+* @version	1.0
+* @date		15. Aug. 2012
+* @author	NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers.  This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+**********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup SDMMC	SDMMC (SDMMC Card Interface)
+ * @ingroup LPC4300CMSIS_FwLib_Drivers
+ * @{
+ */
+#ifndef LPC43XX_SDMMC_H
+#define LPC43XX_SDMMC_H
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup SDMMC_Private_Macros SDMMC Private Macros
+ * @{
+ */
+
+/** \brief card type defines
+ */
+#define CARD_TYPE_SD    (1 << 0)
+#define CARD_TYPE_4BIT  (1 << 1)
+#define CARD_TYPE_8BIT  (1 << 2)
+#define CARD_TYPE_HC    (OCR_HC_CCS) /*!< high capacity card > 2GB */
+
+#define MMC_SECTOR_SIZE 		512
+
+/** \brief Setup options for the SDIO driver
+ */
+#define US_TIMEOUT 				1000000 	/*!< give 1 atleast 1 sec for the card to respond */
+#define MS_ACQUIRE_DELAY		(10) 		/*!< inter-command acquire oper condition delay in msec*/
+#define INIT_OP_RETRIES   		50  		/*!< initial OP_COND retries */
+#define SET_OP_RETRIES    		1000 		/*!< set OP_COND retries */
+#define SDIO_BUS_WIDTH			4			/*!< Max bus width supported */
+#define SD_MMC_ENUM_CLOCK       400000		/*!< Typical enumeration clock rate */
+#define MMC_MAX_CLOCK           20000000	/*!< Max MMC clock rate */
+#define MMC_LOW_BUS_MAX_CLOCK   26000000	/*!< Type 0 MMC card max clock rate */
+#define MMC_HIGH_BUS_MAX_CLOCK  52000000	/*!< Type 1 MMC card max clock rate */
+#define SD_MAX_CLOCK            25000000	/*!< Max SD clock rate */
+
+/* Function prototype for event setup function */
+typedef void (*MCI_EVSETUP_FUNC_T)(uint32_t);
+
+/* Function prototype for wait (for IRQ) function */
+typedef uint32_t (*MCI_WAIT_CB_FUNC_T)(uint32_t);
+
+/* Function prototype for milliSecond delay function */
+typedef void (*MCI_MSDELAY_FUNC_T)(uint32_t);
+
+/**
+ * @}
+ */
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup SDMMC_Public_Functions SDMMC Public Functions
+ * @{
+ */
+
+/* Attempt to enumerate an SDMMC card */
+int32_t sdmmc_acquire(MCI_EVSETUP_FUNC_T evsetup_cb,
+	MCI_WAIT_CB_FUNC_T waitfunc_cb, MCI_MSDELAY_FUNC_T msdelay_func,
+	struct _mci_card_struct *pcardinfo);
+
+/* Get card's current state (idle, transfer, program, etc.) */
+int32_t sdmmc_get_state(void);
+
+/* Get card's size */
+int32_t sdmmc_get_device_size(void);
+
+/* SDMMC read function - reads data from a card */
+int32_t sdmmc_read_blocks(void *buffer, int32_t start_block,
+    int32_t end_block);
+
+/* SDMMC write function - writes data to a card. After calling this
+   function, do not use read or write until the card state has
+   left the program state. */
+int32_t sdmmc_write_blocks(void *buffer, int32_t start_block,
+    int32_t end_block);
+
+/**
+ * @}
+ */
+ 
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* end LPC43XX_SDMMC_H */
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */