bsp lpc51
This commit is contained in:
hathach
37
hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk
Normal file
37
hw/bsp/lpc51/boards/lpcxpresso51u68/board.mk
Normal file
@@ -0,0 +1,37 @@
|
||||
MCU = LPC51U68
|
||||
|
||||
CFLAGS += \
|
||||
-DCPU_LPC51U68JBD64 \
|
||||
-DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))'
|
||||
|
||||
SRC_C += \
|
||||
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
|
||||
$(MCU_DIR)/system_LPC51U68.c \
|
||||
$(MCU_DIR)/drivers/fsl_clock.c \
|
||||
$(MCU_DIR)/drivers/fsl_power.c \
|
||||
$(MCU_DIR)/drivers/fsl_reset.c \
|
||||
$(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \
|
||||
$(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \
|
||||
$(SDK_DIR)/drivers/flexcomm/fsl_usart.c
|
||||
|
||||
INC += \
|
||||
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
|
||||
$(TOP)/$(MCU_DIR) \
|
||||
$(TOP)/$(MCU_DIR)/drivers \
|
||||
$(TOP)/$(SDK_DIR)/drivers/common \
|
||||
$(TOP)/$(SDK_DIR)/drivers/flexcomm \
|
||||
$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
|
||||
$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
|
||||
|
||||
SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S
|
||||
|
||||
LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
|
||||
|
||||
JLINK_DEVICE = LPC51U68
|
||||
PYOCD_TARGET = LPC51U68
|
||||
|
||||
# flash using pyocd (51u68 is not supported yet)
|
||||
flash: flash-pyocd
|
||||
179
hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c
Normal file
179
hw/bsp/lpc51/boards/lpcxpresso51u68/lpcxpresso51u68.c
Normal file
@@ -0,0 +1,179 @@
|
||||
/*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2018, hathach (tinyusb.org)
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* This file is part of the TinyUSB stack.
|
||||
*/
|
||||
|
||||
#include "../board.h"
|
||||
#include "fsl_device_registers.h"
|
||||
#include "fsl_gpio.h"
|
||||
#include "fsl_power.h"
|
||||
#include "fsl_iocon.h"
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||
//--------------------------------------------------------------------+
|
||||
void USB0_IRQHandler(void)
|
||||
{
|
||||
tud_int_handler(0);
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACRO TYPEDEF CONSTANT ENUM
|
||||
//--------------------------------------------------------------------+
|
||||
#define LED_PORT 0
|
||||
#define LED_PIN 29
|
||||
#define LED_STATE_ON 0
|
||||
|
||||
// WAKE button
|
||||
#define BUTTON_PORT 0
|
||||
#define BUTTON_PIN 24
|
||||
|
||||
// IOCON pin mux
|
||||
#define IOCON_PIO_DIGITAL_EN 0x80u /*!< Enables digital function */
|
||||
#define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */
|
||||
#define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */
|
||||
#define IOCON_PIO_INPFILT_OFF 0x0100u /*!< Input filter disabled */
|
||||
#define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */
|
||||
#define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */
|
||||
#define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */
|
||||
#define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */
|
||||
|
||||
/****************************************************************
|
||||
name: BOARD_BootClockFROHF96M
|
||||
outputs:
|
||||
- {id: SYSTICK_clock.outFreq, value: 96 MHz}
|
||||
- {id: System_clock.outFreq, value: 96 MHz}
|
||||
settings:
|
||||
- {id: SYSCON.MAINCLKSELA.sel, value: SYSCON.fro_hf}
|
||||
sources:
|
||||
- {id: SYSCON.fro_hf.outFreq, value: 96 MHz}
|
||||
******************************************************************/
|
||||
void BootClockFROHF96M(void)
|
||||
{
|
||||
/*!< Set up the clock sources */
|
||||
/*!< Set up FRO */
|
||||
POWER_DisablePD(kPDRUNCFG_PD_FRO_EN); /*!< Ensure FRO is on */
|
||||
CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /*!< Switch to FRO 12MHz first to ensure we can change voltage without
|
||||
accidentally being below the voltage for current speed */
|
||||
POWER_SetVoltageForFreq(96000000U); /*!< Set voltage for the one of the fastest clock outputs: System clock output */
|
||||
CLOCK_SetFLASHAccessCyclesForFreq(96000000U); /*!< Set FLASH wait states for core */
|
||||
|
||||
CLOCK_SetupFROClocking(96000000U); /*!< Set up high frequency FRO output to selected frequency */
|
||||
|
||||
/*!< Set up dividers */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U, false); /*!< Set AHBCLKDIV divider to value 1 */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 0U, true); /*!< Reset SYSTICKCLKDIV divider counter and halt it */
|
||||
CLOCK_SetClkDiv(kCLOCK_DivSystickClk, 1U, false); /*!< Set SYSTICKCLKDIV divider to value 1 */
|
||||
|
||||
/*!< Set up clock selectors - Attach clocks to the peripheries */
|
||||
CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /*!< Switch MAIN_CLK to FRO_HF */
|
||||
/*!< Set SystemCoreClock variable. */
|
||||
SystemCoreClock = 96000000U;
|
||||
}
|
||||
|
||||
void board_init(void)
|
||||
{
|
||||
// Enable IOCON clock
|
||||
CLOCK_EnableClock(kCLOCK_Iocon);
|
||||
|
||||
// Enable GPIO0 clock
|
||||
CLOCK_EnableClock(kCLOCK_Gpio0);
|
||||
|
||||
// Init 96 MHz clock
|
||||
BootClockFROHF96M();
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
// 1ms tick timer
|
||||
SysTick_Config(SystemCoreClock / 1000);
|
||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||
#endif
|
||||
|
||||
GPIO_PortInit(GPIO, LED_PORT);
|
||||
GPIO_PortInit(GPIO, BUTTON_PORT);
|
||||
|
||||
// LED
|
||||
gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 0};
|
||||
GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config);
|
||||
board_led_write(true);
|
||||
|
||||
// Button
|
||||
gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
|
||||
GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config);
|
||||
|
||||
// USB
|
||||
const uint32_t port1_pin6_config = (
|
||||
IOCON_PIO_FUNC7 | /* Pin is configured as USB0_VBUS */
|
||||
IOCON_PIO_MODE_INACT | /* No addition pin function */
|
||||
IOCON_PIO_INV_DI | /* Input function is not inverted */
|
||||
IOCON_PIO_DIGITAL_EN | /* Enables digital function */
|
||||
IOCON_PIO_INPFILT_OFF | /* Input filter disabled */
|
||||
IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */
|
||||
);
|
||||
IOCON_PinMuxSet(IOCON, 1, 6, port1_pin6_config); /* PORT1 PIN6 (coords: 26) is configured as USB0_VBUS */
|
||||
|
||||
POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*Turn on USB Phy */
|
||||
CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */
|
||||
}
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Board porting API
|
||||
//--------------------------------------------------------------------+
|
||||
|
||||
void board_led_write(bool state)
|
||||
{
|
||||
GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
||||
}
|
||||
|
||||
uint32_t board_button_read(void)
|
||||
{
|
||||
// active low
|
||||
return 1-GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN);
|
||||
}
|
||||
|
||||
int board_uart_read(uint8_t* buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_uart_write(void const * buf, int len)
|
||||
{
|
||||
(void) buf; (void) len;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||
volatile uint32_t system_ticks = 0;
|
||||
void SysTick_Handler(void)
|
||||
{
|
||||
system_ticks++;
|
||||
}
|
||||
|
||||
uint32_t board_millis(void)
|
||||
{
|
||||
return system_ticks;
|
||||
}
|
||||
#endif
|
||||
45
hw/bsp/lpc51/family.mk
Normal file
45
hw/bsp/lpc51/family.mk
Normal file
@@ -0,0 +1,45 @@
|
||||
SDK_DIR = hw/mcu/nxp/mcux-sdk
|
||||
DEPS_SUBMODULES += $(SDK_DIR)
|
||||
|
||||
MCU_DIR = $(SDK_DIR)/devices/$(MCU)
|
||||
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||
|
||||
CFLAGS += \
|
||||
-flto \
|
||||
-mthumb \
|
||||
-mabi=aapcs \
|
||||
-mcpu=cortex-m0plus \
|
||||
-DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \
|
||||
-DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
|
||||
|
||||
# mcu driver cause following warnings
|
||||
CFLAGS += -Wno-error=unused-parameter
|
||||
|
||||
# All source paths should be relative to the top level.
|
||||
LD_FILE = $(MCU_DIR)/gcc/$(MCU)_flash.ld
|
||||
|
||||
SRC_C += \
|
||||
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
|
||||
$(MCU_DIR)/system_$(MCU).c \
|
||||
$(MCU_DIR)/drivers/fsl_clock.c \
|
||||
$(MCU_DIR)/drivers/fsl_power.c \
|
||||
$(MCU_DIR)/drivers/fsl_reset.c \
|
||||
$(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \
|
||||
$(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \
|
||||
$(SDK_DIR)/drivers/flexcomm/fsl_usart.c
|
||||
|
||||
INC += \
|
||||
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
|
||||
$(TOP)/$(MCU_DIR) \
|
||||
$(TOP)/$(MCU_DIR)/drivers \
|
||||
$(TOP)/$(SDK_DIR)/drivers/common \
|
||||
$(TOP)/$(SDK_DIR)/drivers/flexcomm \
|
||||
$(TOP)/$(SDK_DIR)/drivers/lpc_iocon \
|
||||
$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
|
||||
|
||||
SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S
|
||||
|
||||
LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a
|
||||
|
||||
# For freeRTOS port source
|
||||
FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
|
||||
Reference in New Issue
Block a user