andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

change default port some stm bsp

Browse Source 
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
This commit is contained in:
hathach
2020-07-02 11:58:40 +07:00
parent 4966fb2e13
commit 9a290febcd
4 changed files with 49 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files

58
src/portable/st/synopsys/dcd_synopsys.c
View File

@@ -390,7 +390,7 @@ void dcd_init (uint8_t rhport)
// Select default internal VBUS Indicator and Drive for ULPI
usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
#if defined(USB_HS_PHYC)
#if defined(USB_HS_PHYC)
// Highspeed with embedded UTMI PHYC
// Select UTMI Interface
@@ -399,8 +399,9 @@ void dcd_init (uint8_t rhport)
// Enables control of a High Speed USB PHY
USB_HS_PHYCInit();
#endif
} else
#endif
}
else
#endif
{
// Enable internal PHY
@@ -770,43 +771,46 @@ static void handle_rxflvl_ints(uint8_t rhport, USB_OTG_OUTEndpointTypeDef * out_
switch(pktsts) {
case 0x01: // Global OUT NAK (Interrupt)
break;
break;
case 0x02: // Out packet recvd
{
xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT);
{
xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT);
// Read packet off RxFIFO
read_fifo_packet(rhport, xfer->buffer, bcnt);
// Read packet off RxFIFO
read_fifo_packet(rhport, xfer->buffer, bcnt);
// Increment pointer to xfer data
xfer->buffer += bcnt;
// Increment pointer to xfer data
xfer->buffer += bcnt;
// Truncate transfer length in case of short packet
if(bcnt < xfer->max_size) {
xfer->total_len -= (out_ep[epnum].DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DOEPTSIZ_XFRSIZ_Pos;
if(epnum == 0) {
xfer->total_len -= ep0_pending[TUSB_DIR_OUT];
ep0_pending[TUSB_DIR_OUT] = 0;
}
// Truncate transfer length in case of short packet
if(bcnt < xfer->max_size) {
xfer->total_len -= (out_ep[epnum].DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ_Msk) >> USB_OTG_DOEPTSIZ_XFRSIZ_Pos;
if(epnum == 0) {
xfer->total_len -= ep0_pending[TUSB_DIR_OUT];
ep0_pending[TUSB_DIR_OUT] = 0;
}
}
break;
}
break;
case 0x03: // Out packet done (Interrupt)
break;
case 0x04: // Setup packet done (Interrupt)
out_ep[epnum].DOEPTSIZ |= (3 << USB_OTG_DOEPTSIZ_STUPCNT_Pos);
break;
break;
case 0x06: // Setup packet recvd
{
// We can receive up to three setup packets in succession, but
// only the last one is valid.
_setup_packet[0] = (* rx_fifo);
_setup_packet[1] = (* rx_fifo);
}
break;
// We can receive up to three setup packets in succession, but
// only the last one is valid.
_setup_packet[0] = (* rx_fifo);
_setup_packet[1] = (* rx_fifo);
break;
default: // Invalid
TU_BREAKPOINT();
break;
break;
}
}