andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

temporarily comment out all the lwip related code

Browse Source
This commit is contained in:
hathach
2013-09-18 21:08:48 +07:00
parent 8738902495
commit 9d87a1c62b
7 changed files with 153 additions and 61 deletions
Download Patch File Download Diff File Expand all files Collapse all files

46
demos/bsp/boards/embedded_artists/board_ea4357.c
View File

@@ -50,10 +50,11 @@ void board_init(void)
{
CGU_Init();
//#if TUSB_CFG_OS != TUSB_OS_CMSIS_RTX // TODO may move to main.c
#if TUSB_CFG_OS == TUSB_OS_NONE // TODO may move to main.c
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
//#endif
#endif
//------------- USB -------------//
// USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
scu_pinmux(0x2, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power
@@ -66,28 +67,51 @@ void board_init(void)
GPIO_ClearValue(5, BIT_(18));
//------------- I2C (required by LED) -------------//
// init I2C and set up MIC2555 to have 15k pull-down on USB1 D+ & D-
I2C_Init(LPC_I2C0, 100000);
I2C_Cmd(LPC_I2C0, ENABLE);
pca9532_init(); // Leds Init
//------------- LED -------------//
pca9532_init();
// ASSERT_INT(0x058d, mic255_get_vendorid(), (void) 0); // verify vendor id
// ASSERT( mic255_regs_write(6, BIN8(1100)), (void) 0); // pull down D+/D- for host
#if CFG_UART_ENABLE
//------------- UART init -------------//
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
//------------- UART -------------//
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
UART_CFG_Type UARTConfigStruct;
UART_CFG_Type UARTConfigStruct;
UART_ConfigStructInit(&UARTConfigStruct);
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
#if 0
//------------- Ethernet -------------//
LPC_CREG->CREG6 &= ~0x7;
/* RMII mode setup only */
LPC_CREG->CREG6 |= 0x4;
scu_pinmux(0x1, 18, (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET TXD0
scu_pinmux(0x1, 20, (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET TXD1
scu_pinmux(0x0, 1 , (MD_EHS | MD_PLN | MD_ZI) , FUNC6); // ENET TX Enable
scu_pinmux(0x1, 15, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET RXD0
scu_pinmux(0x0, 0 , (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC2); // ENET RXD1
scu_pinmux(0x1, 16, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC7); // ENET RX Data Valid
scu_pinmux(0x1, 19, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC0); // ENET REF CLK
scu_pinmux(0x1, 17, (MD_EHS | MD_PLN | MD_EZI | MD_ZI), FUNC3); // ENET MDIO
scu_pinmux(0xC, 1 , (MD_EHS | MD_PLN | MD_ZI) , FUNC3); // ENET MDC
#endif
}
//--------------------------------------------------------------------+

4
demos/bsp/boards/embedded_artists/board_ea4357.h
View File

@@ -66,8 +66,8 @@
#include "oem_base_board/pca9532.h" // LEDs
#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
//#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
//#define CFG_PRINTF_TARGET PRINTF_TARGET_SWO
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
/*=========================================================================
HARDWARE MAC ADDRESS