andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer

Browse Source
This commit is contained in:
Reinhard Panhuber
2021-04-03 09:50:08 +02:00
parent 9b2ddd9cc6 ab4d30fd6b
commit a1efd41649
271 changed files with 4880 additions and 364291 deletions
Download Patch File Download Diff File Expand all files Collapse all files

131
src/portable/nordic/nrf5x/dcd_nrf5x.c
View File

@@ -53,13 +53,11 @@ enum
enum
{
// Endpoint number is fixed (8) for ISOOUT and ISOIN.
EP_ISO_NUM = 8,
// CBI endpoints count
EP_COUNT = 8
EP_ISO_NUM = 8, // Endpoint number is fixed (8) for ISOOUT and ISOIN
EP_CBI_COUNT = 8 // Control Bulk Interrupt endpoints count
};
// Transfer descriptor
// Transfer Descriptor
typedef struct
{
uint8_t* buffer;
@@ -67,9 +65,10 @@ typedef struct
volatile uint16_t actual_len;
uint16_t mps; // max packet size
// nrf52840 will auto ACK OUT packet after DMA is done
// nRF will auto accept OUT packet after DMA is done
// indicate packet is already ACK
volatile bool data_received;
// Set to true when data was transferred from RAM to ISO IN output buffer.
// New data can be put in ISO IN output buffer after SOF.
bool iso_in_transfer_ready;
@@ -81,7 +80,7 @@ static struct
{
// All 8 endpoints including control IN & OUT (offset 1)
// +1 for ISO endpoints
xfer_td_t xfer[EP_COUNT + 1][2];
xfer_td_t xfer[EP_CBI_COUNT + 1][2];
// Number of pending DMA that is started but not handled yet by dcd_int_handler().
// Since nRF can only carry one DMA can run at a time, this value is normally be either 0 or 1.
@@ -133,7 +132,7 @@ static void edpt_dma_start(volatile uint32_t* reg_startep)
{
ended = NRF_USBD->EVENTS_ENDISOIN + NRF_USBD->EVENTS_ENDISOOUT;
for (uint8_t i=0; i<EP_COUNT; i++)
for (uint8_t i=0; i<EP_CBI_COUNT; i++)
{
ended += NRF_USBD->EVENTS_ENDEPIN[i] + NRF_USBD->EVENTS_ENDEPOUT[i];
}
@@ -166,27 +165,6 @@ static inline xfer_td_t* get_td(uint8_t epnum, uint8_t dir)
return &_dcd.xfer[epnum][dir];
}
/*------------- CBI OUT Transfer -------------*/
// Prepare for a CBI transaction OUT, call at the start
// Allow ACK incoming data
static void xact_out_prepare(uint8_t epnum)
{
if ( epnum == 0 )
{
NRF_USBD->TASKS_EP0RCVOUT = 1;
}
else
{
// Write zero value to SIZE register will allow hw to ACK (accept data)
// If it is not already done by DMA
// SIZE.ISOOUT can also be accessed this way
NRF_USBD->SIZE.EPOUT[epnum] = 0;
}
__ISB(); __DSB();
}
// Start DMA to move data from Endpoint -> RAM
static void xact_out_dma(uint8_t epnum)
{
@@ -217,15 +195,14 @@ static void xact_out_dma(uint8_t epnum)
edpt_dma_start(&NRF_USBD->TASKS_STARTEPOUT[epnum]);
}
xfer->buffer += xact_len;
xfer->actual_len += xact_len;
}
/*------------- CBI IN Transfer -------------*/
// Prepare for a CBI transaction IN, call at the start
// it start DMA to transfer data from RAM -> Endpoint
static void xact_in_prepare(uint8_t epnum)
static void xact_in_dma(uint8_t epnum)
{
xfer_td_t* xfer = get_td(epnum, TUSB_DIR_IN);
@@ -327,6 +304,9 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
{
NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + epnum);
NRF_USBD->EPOUTEN |= TU_BIT(epnum);
// Write any value to SIZE register will allow nRF to ACK/accept data
NRF_USBD->SIZE.EPOUT[epnum] = 0;
}else
{
NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPIN0_Pos + epnum);
@@ -438,20 +418,31 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
}
else if ( dir == TUSB_DIR_OUT )
{
if ( xfer->data_received )
if ( epnum == 0 )
{
// nrf52840 auto ACK OUT packet after DMA is done
// Data already received previously --> trigger DMA to copy to SRAM
xact_out_dma(epnum);
}
else
// Accept next Control Out packet
NRF_USBD->TASKS_EP0RCVOUT = 1;
}else
{
xact_out_prepare(epnum);
if ( xfer->data_received )
{
// Data may already be received previously
xfer->data_received = false;
// start DMA to copy to SRAM
xact_out_dma(epnum);
}
else
{
// nRF auto accept next Bulk/Interrupt OUT packet
// nothing to do
}
}
}
else
{
xact_in_prepare(epnum);
// Start DMA to copy data from RAM -> Endpoint
xact_in_dma(epnum);
}
return true;
@@ -477,6 +468,7 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if ( epnum != 0 && epnum != EP_ISO_NUM )
{
@@ -486,6 +478,10 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
// reset data toggle to DATA0
NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | ep_addr;
// Write any value to SIZE register will allow nRF to ACK/accept data
// Drop any pending data
if (dir == TUSB_DIR_OUT) NRF_USBD->SIZE.EPOUT[epnum] = 0;
__ISB(); __DSB();
}
}
@@ -594,17 +590,18 @@ void dcd_int_handler(uint8_t rhport)
// Setup tokens are specific to the Control endpoint.
if ( int_status & USBD_INTEN_EP0SETUP_Msk )
{
uint8_t const setup[8] = {
NRF_USBD->BMREQUESTTYPE , NRF_USBD->BREQUEST, NRF_USBD->WVALUEL , NRF_USBD->WVALUEH,
NRF_USBD->WINDEXL , NRF_USBD->WINDEXH , NRF_USBD->WLENGTHL, NRF_USBD->WLENGTHH
uint8_t const setup[8] =
{
NRF_USBD->BMREQUESTTYPE , NRF_USBD->BREQUEST, NRF_USBD->WVALUEL , NRF_USBD->WVALUEH,
NRF_USBD->WINDEXL , NRF_USBD->WINDEXH , NRF_USBD->WLENGTHL, NRF_USBD->WLENGTHH
};
// nrf5x hw auto handle set address, there is no need to inform usb stack
tusb_control_request_t const * request = (tusb_control_request_t const *) setup;
if ( !(TUSB_REQ_RCPT_DEVICE == request->bmRequestType_bit.recipient &&
if ( !(TUSB_REQ_RCPT_DEVICE == request->bmRequestType_bit.recipient &&
TUSB_REQ_TYPE_STANDARD == request->bmRequestType_bit.type &&
TUSB_REQ_SET_ADDRESS == request->bRequest) )
TUSB_REQ_SET_ADDRESS == request->bRequest) )
{
dcd_event_setup_received(0, setup, true);
}
@@ -620,15 +617,15 @@ void dcd_int_handler(uint8_t rhport)
* For CBI OUT:
* - Host -> Endpoint
* EPDATA (or EP0DATADONE) interrupted, check EPDATASTATUS.EPOUT[i]
* to start DMA. This step can occur automatically (without sw),
* which means data may or may not ready (data_received flag).
* to start DMA. For Bulk/Interrupt, this step can occur automatically (without sw),
* which means data may or may not be ready (data_received flag).
* - Endpoint -> RAM
* ENDEPOUT[i] interrupted, transaction complete, sw prepare next transaction
*
* For CBI IN:
* - RAM -> Endpoint
* ENDEPIN[i] interrupted indicate DMA is complete. HW will start
* to move daat to host
* to move data to host
* - Endpoint -> Host
* EPDATA (or EP0DATADONE) interrupted, check EPDATASTATUS.EPIN[i].
* Transaction is complete, sw prepare next transaction
@@ -640,27 +637,31 @@ void dcd_int_handler(uint8_t rhport)
/* CBI OUT: Endpoint -> SRAM (aka transaction complete)
* Note: Since nRF controller auto ACK next packet without SW awareness
* We must handle this stage before Host -> Endpoint just in case
* 2 event happens at once
* ISO OUT: Transaction must fit in single packed, it can be shorter then total
* We must handle this stage before Host -> Endpoint just in case 2 event happens at once
*
* ISO OUT: Transaction must fit in single packet, it can be shorter then total
* len if Host decides to sent fewer bytes, it this case transaction is also
* complete and next transfer is not initiated here like for CBI.
*/
for(uint8_t epnum=0; epnum<EP_COUNT+1; epnum++)
for(uint8_t epnum=0; epnum<EP_CBI_COUNT+1; epnum++)
{
if ( tu_bit_test(int_status, USBD_INTEN_ENDEPOUT0_Pos+epnum))
{
xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT);
uint8_t const xact_len = NRF_USBD->EPOUT[epnum].AMOUNT;
// Data in endpoint has been consumed
xfer->data_received = false;
// Transfer complete if transaction len < Max Packet Size or total len is transferred
if ( (epnum != EP_ISO_NUM) && (xact_len == xfer->mps) && (xfer->actual_len < xfer->total_len) )
{
// Prepare for next transaction
xact_out_prepare(epnum);
if ( epnum == 0 )
{
// Accept next Control Out packet
NRF_USBD->TASKS_EP0RCVOUT = 1;
}else
{
// nRF auto accept next Bulk/Interrupt OUT packet
// nothing to do
}
}else
{
xfer->total_len = xfer->actual_len;
@@ -673,7 +674,7 @@ void dcd_int_handler(uint8_t rhport)
// Ended event for CBI IN : nothing to do
}
// Endpoint <-> Host
// Endpoint <-> Host ( In & OUT )
if ( int_status & (USBD_INTEN_EPDATA_Msk | USBD_INTEN_EP0DATADONE_Msk) )
{
uint32_t data_status = NRF_USBD->EPDATASTATUS;
@@ -687,9 +688,9 @@ void dcd_int_handler(uint8_t rhport)
bool const is_control_out = (int_status & USBD_INTEN_EP0DATADONE_Msk) && !(NRF_USBD->BMREQUESTTYPE & TUSB_DIR_IN_MASK);
// CBI In: Endpoint -> Host (transaction complete)
for(uint8_t epnum=0; epnum<8; epnum++)
for(uint8_t epnum=0; epnum<EP_CBI_COUNT; epnum++)
{
if ( tu_bit_test(data_status, epnum ) || ( epnum == 0 && is_control_in) )
if ( tu_bit_test(data_status, epnum) || (epnum == 0 && is_control_in) )
{
xfer_td_t* xfer = get_td(epnum, TUSB_DIR_IN);
@@ -697,8 +698,8 @@ void dcd_int_handler(uint8_t rhport)
if ( xfer->actual_len < xfer->total_len )
{
// prepare next transaction
xact_in_prepare(epnum);
// Start DMA to copy next data packet
xact_in_dma(epnum);
} else
{
// CBI IN complete
@@ -708,9 +709,9 @@ void dcd_int_handler(uint8_t rhport)
}
// CBI OUT: Host -> Endpoint
for(uint8_t epnum=0; epnum<8; epnum++)
for(uint8_t epnum=0; epnum<EP_CBI_COUNT; epnum++)
{
if ( tu_bit_test(data_status, 16+epnum ) || ( epnum == 0 && is_control_out) )
if ( tu_bit_test(data_status, 16+epnum) || (epnum == 0 && is_control_out) )
{
xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT);
@@ -719,7 +720,7 @@ void dcd_int_handler(uint8_t rhport)
xact_out_dma(epnum);
}else
{
// Data overflow !!! Nah, nrf52840 will auto ACK OUT packet after DMA is done
// Data overflow !!! Nah, nRF will auto accept next Bulk/Interrupt OUT packet
// Mark this endpoint with data received
xfer->data_received = true;
}

3
src/portable/nxp/lpc17_40/dcd_lpc17_40.c
View File

@@ -26,7 +26,8 @@
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
#if TUSB_OPT_DEVICE_ENABLED && \
(CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
#include "device/dcd.h"
#include "dcd_lpc17_40.h"

6
src/portable/nxp/lpc17_40/dcd_lpc17_40.h
View File

@@ -24,8 +24,8 @@
* This file is part of the TinyUSB stack.
*/
#ifndef _TUSB_DCD_LPC175X_6X_H_
#define _TUSB_DCD_LPC175X_6X_H_
#ifndef _TUSB_DCD_LPC17_40_H_
#define _TUSB_DCD_LPC17_40_H_
#include "common/tusb_common.h"
@@ -149,4 +149,4 @@ enum {
}
#endif
#endif /* _TUSB_DCD_LPC175X_6X_H_ */
#endif

3
src/portable/nxp/lpc17_40/hcd_lpc17_40.c
View File

@@ -26,7 +26,8 @@
#include "tusb_option.h"
#if (CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
#if TUSB_OPT_HOST_ENABLED && \
(CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX)
#include "chip.h"

736
src/portable/renesas/usba/dcd_usba.c Normal file
View File

@@ -0,0 +1,736 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020 Koji Kitayama
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_RX63X )
#include "device/dcd.h"
#include "iodefine.h"
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
#define SYSTEM_PRCR_PRC1 (1<<1)
#define SYSTEM_PRCR_PRKEY (0xA5u<<8)
#define USB_FIFOSEL_TX ((uint16_t)(1u<<5))
#define USB_FIFOSEL_MBW_8 ((uint16_t)(0u<<10))
#define USB_FIFOSEL_MBW_16 ((uint16_t)(1u<<10))
#define USB_IS0_CTSQ ((uint16_t)(7u))
#define USB_IS0_DVSQ ((uint16_t)(7u<<4))
#define USB_IS0_VALID ((uint16_t)(1u<<3))
#define USB_IS0_BRDY ((uint16_t)(1u<<8))
#define USB_IS0_NRDY ((uint16_t)(1u<<9))
#define USB_IS0_BEMP ((uint16_t)(1u<<10))
#define USB_IS0_CTRT ((uint16_t)(1u<<11))
#define USB_IS0_DVST ((uint16_t)(1u<<12))
#define USB_IS0_SOFR ((uint16_t)(1u<<13))
#define USB_IS0_RESM ((uint16_t)(1u<<14))
#define USB_IS0_VBINT ((uint16_t)(1u<<15))
#define USB_IS1_SACK ((uint16_t)(1u<<4))
#define USB_IS1_SIGN ((uint16_t)(1u<<5))
#define USB_IS1_EOFERR ((uint16_t)(1u<<6))
#define USB_IS1_ATTCH ((uint16_t)(1u<<11))
#define USB_IS1_DTCH ((uint16_t)(1u<<12))
#define USB_IS1_BCHG ((uint16_t)(1u<<14))
#define USB_IS1_OVRCR ((uint16_t)(1u<<15))
#define USB_IS0_CTSQ_MSK (7u)
#define USB_IS0_CTSQ_SETUP (1u)
#define USB_IS0_DVSQ_DEF (1u<<4)
#define USB_IS0_DVSQ_ADDR (2u<<4)
#define USB_IS0_DVSQ_SUSP (4u<<4)
#define USB_PIPECTR_PID_NAK (0u)
#define USB_PIPECTR_PID_BUF (1u)
#define USB_PIPECTR_PID_STALL (2u)
#define USB_PIPECTR_CCPL (1u<<2)
#define USB_PIPECTR_SQMON (1u<<6)
#define USB_PIPECTR_SQCLR (1u<<8)
#define USB_PIPECTR_ACLRM (1u<<9)
#define USB_PIPECTR_INBUFM (1u<<14)
#define USB_PIPECTR_BSTS (1u<<15)
#define USB_FIFOCTR_DTLN (0x1FF)
#define USB_FIFOCTR_FRDY (1u<<13)
#define USB_FIFOCTR_BCLR (1u<<14)
#define USB_FIFOCTR_BVAL (1u<<15)
#define USB_PIPECFG_SHTNAK (1u<<7)
#define USB_PIPECFG_DBLB (1u<<9)
#define USB_PIPECFG_BULK (1u<<14)
#define USB_PIPECFG_ISO (3u<<14)
#define USB_PIPECFG_INT (2u<<14)
#define FIFO_REQ_CLR (1u)
#define FIFO_COMPLETE (1u<<1)
typedef struct {
union {
struct {
uint16_t : 8;
uint16_t TRCLR: 1;
uint16_t TRENB: 1;
uint16_t : 0;
};
uint16_t TRE;
};
uint16_t TRN;
} reg_pipetre_t;
typedef union {
struct {
volatile uint16_t u8: 8;
volatile uint16_t : 0;
};
volatile uint16_t u16;
} hw_fifo_t;
typedef struct TU_ATTR_PACKED
{
uintptr_t addr; /* the start address of a transfer data buffer */
uint16_t length; /* the number of bytes in the buffer */
uint16_t remaining; /* the number of bytes remaining in the buffer */
struct {
uint32_t ep : 8; /* an assigned endpoint address */
uint32_t : 0;
};
} pipe_state_t;
typedef struct
{
pipe_state_t pipe[9];
uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */
} dcd_data_t;
//--------------------------------------------------------------------+
// INTERNAL OBJECT & FUNCTION DECLARATION
//--------------------------------------------------------------------+
CFG_TUSB_MEM_SECTION static dcd_data_t _dcd;
static uint32_t disable_interrupt(void)
{
uint32_t pswi;
pswi = __builtin_rx_mvfc(0) & 0x010000;
__builtin_rx_clrpsw('I');
return pswi;
}
static void enable_interrupt(uint32_t pswi)
{
__builtin_rx_mvtc(0, __builtin_rx_mvfc(0) | pswi);
}
static unsigned find_pipe(unsigned xfer)
{
switch (xfer) {
case TUSB_XFER_ISOCHRONOUS:
for (int i = 1; i <= 2; ++i) {
if (0 == _dcd.pipe[i].ep) return i;
}
break;
case TUSB_XFER_BULK:
for (int i = 3; i <= 5; ++i) {
if (0 == _dcd.pipe[i].ep) return i;
}
for (int i = 1; i <= 1; ++i) {
if (0 == _dcd.pipe[i].ep) return i;
}
break;
case TUSB_XFER_INTERRUPT:
for (int i = 6; i <= 9; ++i) {
if (0 == _dcd.pipe[i].ep) return i;
}
break;
default:
/* No support for control transfer */
break;
}
return 0;
}
static volatile uint16_t* get_pipectr(unsigned num)
{
volatile uint16_t *ctr = NULL;
if (num) {
ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD;
ctr += num - 1;
} else {
ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD;
}
return ctr;
}
static volatile reg_pipetre_t* get_pipetre(unsigned num)
{
volatile reg_pipetre_t* tre = NULL;
if ((1 <= num) && (num <= 5)) {
tre = (volatile reg_pipetre_t*)&USB0.PIPE1TRE.WORD;
tre += num - 1;
}
return tre;
}
static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr)
{
(void)rhport;
volatile uint16_t *ctr = NULL;
const unsigned epn = tu_edpt_number(ep_addr);
if (epn) {
const unsigned dir = tu_edpt_dir(ep_addr);
const unsigned num = _dcd.ep[dir][epn];
if (num) {
ctr = (volatile uint16_t*)&USB0.PIPE1CTR.WORD;
ctr += num - 1;
}
} else {
ctr = (volatile uint16_t*)&USB0.DCPCTR.WORD;
}
return ctr;
}
static unsigned wait_for_pipe_ready(void)
{
unsigned ctr;
do {
ctr = USB0.D0FIFOCTR.WORD;
} while (!(ctr & USB_FIFOCTR_FRDY));
return ctr;
}
static unsigned select_pipe(unsigned num, unsigned attr)
{
USB0.PIPESEL.WORD = num;
USB0.D0FIFOSEL.WORD = num | attr;
while (!(USB0.D0FIFOSEL.BIT.CURPIPE != num)) ;
return wait_for_pipe_ready();
}
/* 1 less than mps bytes were written to FIFO
* 2 no bytes were written to FIFO
* 0 mps bytes were written to FIFO */
static int fifo_write(volatile void *fifo, pipe_state_t* pipe, unsigned mps)
{
unsigned rem = pipe->remaining;
if (!rem) return 2;
unsigned len = TU_MIN(rem, mps);
hw_fifo_t *reg = (hw_fifo_t*)fifo;
uintptr_t addr = pipe->addr + pipe->length - rem;
if (addr & 1u) {
/* addr is not 2-byte aligned */
reg->u8 = *(const uint8_t *)addr;
++addr;
--len;
}
while (len >= 2) {
reg->u16 = *(const uint16_t *)addr;
addr += 2;
len -= 2;
}
if (len) {
reg->u8 = *(const uint8_t *)addr;
++addr;
}
if (rem < mps) return 1;
return 0;
}
/* 1 less than mps bytes were read from FIFO
* 2 the end of the buffer reached.
* 0 mps bytes were read from FIFO */
static int fifo_read(volatile void *fifo, pipe_state_t* pipe, unsigned mps, size_t len)
{
unsigned rem = pipe->remaining;
if (!rem) return 2;
if (rem < len) len = rem;
pipe->remaining = rem - len;
hw_fifo_t *reg = (hw_fifo_t*)fifo;
uintptr_t addr = pipe->addr;
unsigned loop = len;
while (loop--) {
*(uint8_t *)addr = reg->u8;
++addr;
}
pipe->addr = addr;
if (rem < mps) return 1;
if (rem == len) return 2;
return 0;
}
static void process_setup_packet(uint8_t rhport)
{
uint16_t setup_packet[4];
if (0 == (USB0.INTSTS0.WORD & USB_IS0_VALID)) return;
USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR;
setup_packet[0] = USB0.USBREQ.WORD;
setup_packet[1] = USB0.USBVAL;
setup_packet[2] = USB0.USBINDX;
setup_packet[3] = USB0.USBLENG;
USB0.INTSTS0.WORD = ~USB_IS0_VALID;
dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet[0], true);
}
static void process_status_completion(uint8_t rhport)
{
uint8_t ep_addr;
/* Check the data stage direction */
if (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) {
/* IN transfer. */
ep_addr = tu_edpt_addr(0, TUSB_DIR_IN);
} else {
/* OUT transfer. */
ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT);
}
dcd_event_xfer_complete(rhport, ep_addr, 0, XFER_RESULT_SUCCESS, true);
}
static bool process_edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
{
(void)rhport;
pipe_state_t *pipe = &_dcd.pipe[0];
/* configure fifo direction and access unit settings */
if (ep_addr) { /* IN, 2 bytes */
USB0.CFIFOSEL.WORD = USB_FIFOSEL_TX | USB_FIFOSEL_MBW_16;
while (!(USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX)) ;
} else { /* OUT, a byte */
USB0.CFIFOSEL.WORD = USB_FIFOSEL_MBW_8;
while (USB0.CFIFOSEL.WORD & USB_FIFOSEL_TX) ;
}
if (total_bytes) {
pipe->addr = (uintptr_t)buffer;
pipe->length = total_bytes;
pipe->remaining = total_bytes;
if (ep_addr) { /* IN */
TU_ASSERT(USB0.DCPCTR.BIT.BSTS && (USB0.USBREQ.WORD & 0x80));
if (fifo_write(&USB0.CFIFO.WORD, pipe, 64)) {
USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL;
}
}
USB0.DCPCTR.WORD = USB_PIPECTR_PID_BUF;
} else {
/* ZLP */
pipe->addr = 0;
pipe->length = 0;
pipe->remaining = 0;
USB0.DCPCTR.WORD = USB_PIPECTR_CCPL | USB_PIPECTR_PID_BUF;
}
return true;
}
static void process_edpt0_bemp(uint8_t rhport)
{
pipe_state_t *pipe = &_dcd.pipe[0];
const unsigned rem = pipe->remaining;
if (rem > 64) {
pipe->remaining = rem - 64;
int r = fifo_write(&USB0.CFIFO.WORD, &_dcd.pipe[0], 64);
if (r) USB0.CFIFOCTR.WORD = USB_FIFOCTR_BVAL;
return;
}
pipe->addr = 0;
pipe->remaining = 0;
dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN),
pipe->length, XFER_RESULT_SUCCESS, true);
}
static void process_edpt0_brdy(uint8_t rhport)
{
size_t len = USB0.CFIFOCTR.BIT.DTLN;
int cplt = fifo_read(&USB0.CFIFO.WORD, &_dcd.pipe[0], 64, len);
if (cplt || (len < 64)) {
if (2 != cplt) {
USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR;
}
dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_OUT),
_dcd.pipe[0].length - _dcd.pipe[0].remaining,
XFER_RESULT_SUCCESS, true);
}
}
static bool process_pipe_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
{
(void)rhport;
const unsigned epn = tu_edpt_number(ep_addr);
const unsigned dir = tu_edpt_dir(ep_addr);
const unsigned num = _dcd.ep[dir][epn];
TU_ASSERT(num);
pipe_state_t *pipe = &_dcd.pipe[num];
pipe->addr = (uintptr_t)buffer;
pipe->length = total_bytes;
pipe->remaining = total_bytes;
USB0.PIPESEL.WORD = num;
const unsigned mps = USB0.PIPEMAXP.WORD;
if (dir) { /* IN */
USB0.D0FIFOSEL.WORD = num | USB_FIFOSEL_MBW_16;
while (!(USB0.D0FIFOSEL.BIT.CURPIPE != num)) ;
int r = fifo_write(&USB0.D0FIFO.WORD, pipe, mps);
if (r) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL;
USB0.D0FIFOSEL.WORD = 0;
} else {
volatile reg_pipetre_t *pt = get_pipetre(num);
if (pt) {
volatile uint16_t *ctr = get_pipectr(num);
if (*ctr & 0x3) *ctr = USB_PIPECTR_PID_NAK;
pt->TRE = TU_BIT(8);
pt->TRN = (total_bytes + mps - 1) / mps;
pt->TRENB = 1;
*ctr = USB_PIPECTR_PID_BUF;
}
}
// TU_LOG1("X %x %d\r\n", ep_addr, total_bytes);
return true;
}
static void process_pipe_brdy(uint8_t rhport, unsigned num)
{
pipe_state_t *pipe = &_dcd.pipe[num];
if (tu_edpt_dir(pipe->ep)) { /* IN */
select_pipe(num, USB_FIFOSEL_MBW_16);
const unsigned mps = USB0.PIPEMAXP.WORD;
unsigned rem = pipe->remaining;
rem -= TU_MIN(rem, mps);
pipe->remaining = rem;
if (rem) {
int r = 0;
r = fifo_write(&USB0.D0FIFO.WORD, pipe, mps);
if (r) USB0.D0FIFOCTR.WORD = USB_FIFOCTR_BVAL;
USB0.D0FIFOSEL.WORD = 0;
return;
}
USB0.D0FIFOSEL.WORD = 0;
pipe->addr = 0;
pipe->remaining = 0;
dcd_event_xfer_complete(rhport, pipe->ep, pipe->length,
XFER_RESULT_SUCCESS, true);
} else {
const unsigned ctr = select_pipe(num, USB_FIFOSEL_MBW_8);
const unsigned len = ctr & USB_FIFOCTR_DTLN;
const unsigned mps = USB0.PIPEMAXP.WORD;
int cplt = fifo_read(&USB0.D0FIFO.WORD, pipe, mps, len);
if (cplt || (len < mps)) {
if (2 != cplt) {
USB0.D0FIFO.WORD = USB_FIFOCTR_BCLR;
}
USB0.D0FIFOSEL.WORD = 0;
dcd_event_xfer_complete(rhport, pipe->ep,
pipe->length - pipe->remaining,
XFER_RESULT_SUCCESS, true);
return;
}
USB0.D0FIFOSEL.WORD = 0;
}
}
static void process_bus_reset(uint8_t rhport)
{
USB0.BEMPENB.WORD = 1;
USB0.BRDYENB.WORD = 1;
USB0.CFIFOCTR.WORD = USB_FIFOCTR_BCLR;
USB0.D0FIFOSEL.WORD = 0;
USB0.D1FIFOSEL.WORD = 0;
volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1CTR.WORD));
volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t)(&USB0.PIPE1TRE.WORD));
for (int i = 1; i <= 5; ++i) {
USB0.PIPESEL.WORD = i;
USB0.PIPECFG.WORD = 0;
*ctr = USB_PIPECTR_ACLRM;
*ctr = 0;
++ctr;
*tre = TU_BIT(8);
tre += 2;
}
for (int i = 6; i <= 9; ++i) {
USB0.PIPESEL.WORD = i;
USB0.PIPECFG.WORD = 0;
*ctr = USB_PIPECTR_ACLRM;
*ctr = 0;
++ctr;
}
tu_varclr(&_dcd);
dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
}
static void process_set_address(uint8_t rhport)
{
const uint32_t addr = USB0.USBADDR.BIT.USBADDR;
if (!addr) return;
const tusb_control_request_t setup_packet = {
.bmRequestType = 0,
.bRequest = 5,
.wValue = addr,
.wIndex = 0,
.wLength = 0,
};
dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet, true);
}
/*------------------------------------------------------------------*/
/* Device API
*------------------------------------------------------------------*/
void dcd_init(uint8_t rhport)
{
(void)rhport;
/* Enable USB0 */
uint32_t pswi = disable_interrupt();
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1;
MSTP(USB0) = 0;
SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY;
enable_interrupt(pswi);
USB0.SYSCFG.BIT.SCKE = 1;
while (!USB0.SYSCFG.BIT.SCKE) ;
USB0.SYSCFG.BIT.DRPD = 0;
USB0.SYSCFG.BIT.DCFM = 0;
USB0.SYSCFG.BIT.USBE = 1;
IR(USB0, USBI0) = 0;
/* Setup default control pipe */
USB0.DCPMAXP.BIT.MXPS = 64;
USB0.INTENB0.WORD = USB_IS0_VBINT | USB_IS0_BRDY | USB_IS0_BEMP | USB_IS0_DVST | USB_IS0_CTRT;
USB0.BEMPENB.WORD = 1;
USB0.BRDYENB.WORD = 1;
if (USB0.INTSTS0.BIT.VBSTS) {
dcd_connect(rhport);
}
}
void dcd_int_enable(uint8_t rhport)
{
(void)rhport;
IEN(USB0, USBI0) = 1;
}
void dcd_int_disable(uint8_t rhport)
{
(void)rhport;
IEN(USB0, USBI0) = 0;
}
void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
{
(void)rhport;
(void)dev_addr;
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void)rhport;
/* TODO */
}
void dcd_connect(uint8_t rhport)
{
(void)rhport;
USB0.SYSCFG.BIT.DPRPU = 1;
}
void dcd_disconnect(uint8_t rhport)
{
(void)rhport;
USB0.SYSCFG.BIT.DPRPU = 0;
}
//--------------------------------------------------------------------+
// Endpoint API
//--------------------------------------------------------------------+
bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
{
(void)rhport;
const unsigned ep_addr = ep_desc->bEndpointAddress;
const unsigned epn = tu_edpt_number(ep_addr);
const unsigned dir = tu_edpt_dir(ep_addr);
const unsigned xfer = ep_desc->bmAttributes.xfer;
const unsigned mps = ep_desc->wMaxPacketSize.size;
if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) {
/* USBa supports up to 256 bytes */
return false;
}
const unsigned num = find_pipe(xfer);
if (!num) return false;
_dcd.pipe[num].ep = ep_addr;
_dcd.ep[dir][epn] = num;
/* setup pipe */
dcd_int_disable(rhport);
USB0.PIPESEL.WORD = num;
USB0.PIPEMAXP.WORD = mps;
volatile uint16_t *ctr = get_pipectr(num);
*ctr = USB_PIPECTR_ACLRM;
*ctr = 0;
unsigned cfg = (dir << 4) | epn;
if (xfer == TUSB_XFER_BULK) {
cfg |= USB_PIPECFG_BULK | USB_PIPECFG_SHTNAK | USB_PIPECFG_DBLB;
} else if (xfer == TUSB_XFER_INTERRUPT) {
cfg |= USB_PIPECFG_INT;
} else {
cfg |= USB_PIPECFG_ISO | USB_PIPECFG_DBLB;
}
USB0.PIPECFG.WORD = cfg;
USB0.BRDYSTS.WORD = 0x1FFu ^ TU_BIT(num);
USB0.BRDYENB.WORD |= TU_BIT(num);
if (dir || (xfer != TUSB_XFER_BULK)) {
*ctr = USB_PIPECTR_PID_BUF;
}
// TU_LOG1("O %d %x %x\r\n", USB0.PIPESEL.WORD, USB0.PIPECFG.WORD, USB0.PIPEMAXP.WORD);
dcd_int_enable(rhport);
return true;
}
void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr)
{
(void)rhport;
const unsigned epn = tu_edpt_number(ep_addr);
const unsigned dir = tu_edpt_dir(ep_addr);
const unsigned num = _dcd.ep[dir][epn];
USB0.BRDYENB.WORD &= ~TU_BIT(num);
volatile uint16_t *ctr = get_pipectr(num);
*ctr = 0;
USB0.PIPESEL.WORD = num;
USB0.PIPECFG.WORD = 0;
_dcd.pipe[num].ep = 0;
_dcd.ep[dir][epn] = 0;
}
bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
{
bool r;
const unsigned epn = tu_edpt_number(ep_addr);
dcd_int_disable(rhport);
if (0 == epn) {
r = process_edpt0_xfer(rhport, ep_addr, buffer, total_bytes);
} else {
r = process_pipe_xfer(rhport, ep_addr, buffer, total_bytes);
}
dcd_int_enable(rhport);
return r;
}
void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
{
volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr);
if (!ctr) return;
dcd_int_disable(rhport);
const uint32_t pid = *ctr & 0x3;
*ctr = pid | USB_PIPECTR_PID_STALL;
*ctr = USB_PIPECTR_PID_STALL;
dcd_int_enable(rhport);
}
void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
{
volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr);
if (!ctr) return;
dcd_int_disable(rhport);
*ctr = USB_PIPECTR_SQCLR;
if (tu_edpt_dir(ep_addr)) { /* IN */
*ctr = USB_PIPECTR_PID_BUF;
} else {
const unsigned num = _dcd.ep[0][tu_edpt_number(ep_addr)];
USB0.PIPESEL.WORD = num;
if (USB0.PIPECFG.BIT.TYPE != 1) {
*ctr = USB_PIPECTR_PID_BUF;
}
}
dcd_int_enable(rhport);
}
//--------------------------------------------------------------------+
// ISR
//--------------------------------------------------------------------+
void dcd_int_handler(uint8_t rhport)
{
(void)rhport;
unsigned is0 = USB0.INTSTS0.WORD;
/* clear bits except VALID */
USB0.INTSTS0.WORD = USB_IS0_VALID;
if (is0 & USB_IS0_VBINT) {
if (USB0.INTSTS0.BIT.VBSTS) {
dcd_connect(rhport);
} else {
dcd_disconnect(rhport);
}
}
if (is0 & USB_IS0_DVST) {
switch (is0 & USB_IS0_DVSQ) {
case USB_IS0_DVSQ_DEF:
process_bus_reset(rhport);
break;
case USB_IS0_DVSQ_ADDR:
process_set_address(rhport);
break;
default:
break;
}
}
if (is0 & USB_IS0_CTRT) {
if (is0 & USB_IS0_CTSQ_SETUP) {
/* A setup packet has been received. */
process_setup_packet(rhport);
} else if (0 == (is0 & USB_IS0_CTSQ_MSK)) {
/* A ZLP has been sent/received. */
process_status_completion(rhport);
}
}
if (is0 & USB_IS0_BEMP) {
const unsigned s = USB0.BEMPSTS.WORD;
USB0.BEMPSTS.WORD = 0;
if (s & 1) {
process_edpt0_bemp(rhport);
}
}
if (is0 & USB_IS0_BRDY) {
const unsigned m = USB0.BRDYENB.WORD;
unsigned s = USB0.BRDYSTS.WORD & m;
USB0.BRDYSTS.WORD = 0;
if (s & 1) {
process_edpt0_brdy(rhport);
s &= ~1;
}
while (s) {
const unsigned num = __builtin_ctz(s);
process_pipe_brdy(rhport, num);
s &= ~TU_BIT(num);
}
}
}
#endif

931
src/portable/silabs/efm32/dcd_efm32.c Normal file
View File

@@ -0,0 +1,931 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2021 Rafael Silva (@perigoso)
* Copyright (c) 2021 Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && ( \
(CFG_TUSB_MCU == OPT_MCU_EFM32GG) || \
(CFG_TUSB_MCU == OPT_MCU_EFM32GG11) || \
(CFG_TUSB_MCU == OPT_MCU_EFM32GG12) )
/* Silabs */
#include "em_device.h"
#include "device/dcd.h"
/*
* Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval)
* We disable SOF for now until needed later on
*/
#define USE_SOF 0
/*
* Number of endpoints
* 12 software-configurable endpoints (6 IN, 6 OUT) in addition to endpoint 0
*/
#define EP_COUNT 7
/* FIFO size in bytes */
#define EP_FIFO_SIZE 2048
/* Max number of IN EP FIFOs */
#define EP_FIFO_NUM 7
/* */
typedef struct {
uint8_t *buffer;
uint16_t total_len;
uint16_t queued_len;
uint16_t max_size;
bool short_packet;
} xfer_ctl_t;
static uint32_t _setup_packet[2];
#define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir]
static xfer_ctl_t xfer_status[EP_COUNT][2];
/* Keep count of how many FIFOs are in use */
static uint8_t _allocated_fifos = 1; /* FIFO0 is always in use */
static volatile uint32_t* tx_fifo[EP_FIFO_NUM] = {
USB->FIFO0D,
USB->FIFO1D,
USB->FIFO2D,
USB->FIFO3D,
USB->FIFO4D,
USB->FIFO5D,
USB->FIFO6D,
};
/* Register Helpers */
#define DCTL_WO_BITMASK (USB_DCTL_CGOUTNAK | USB_DCTL_SGOUTNAK | USB_DCTL_CGNPINNAK | USB_DCTL_SGNPINNAK)
#define GUSBCFG_WO_BITMASK (USB_GUSBCFG_CORRUPTTXPKT)
#define DEPCTL_WO_BITMASK (USB_DIEP_CTL_CNAK | USB_DIEP_CTL_SNAK | USB_DIEP_CTL_SETD0PIDEF | USB_DIEP_CTL_SETD1PIDOF)
/* Will either return an unused FIFO number, or 0 if all are used. */
static uint8_t get_free_fifo(void)
{
if(_allocated_fifos < EP_FIFO_NUM) return _allocated_fifos++;
return 0;
}
/*
static void flush_rx_fifo(void)
{
USB->GRSTCTL = USB_GRSTCTL_RXFFLSH;
while(USB->GRSTCTL & USB_GRSTCTL_RXFFLSH);
}
*/
static void flush_tx_fifo(uint8_t fifo_num)
{
USB->GRSTCTL = USB_GRSTCTL_TXFFLSH | (fifo_num << _USB_GRSTCTL_TXFNUM_SHIFT);
while(USB->GRSTCTL & USB_GRSTCTL_TXFFLSH);
}
/* Setup the control endpoint 0. */
static void bus_reset(void)
{
USB->DOEP0CTL |= USB_DIEP_CTL_SNAK;
for(uint8_t i = 0; i < EP_COUNT - 1; i++)
{
USB->DOEP[i].CTL |= USB_DIEP_CTL_SNAK;
}
/* reset address */
USB->DCFG &= ~_USB_DCFG_DEVADDR_MASK;
USB->DAINTMSK |= USB_DAINTMSK_OUTEPMSK0 | USB_DAINTMSK_INEPMSK0;
USB->DOEPMSK |= USB_DOEPMSK_SETUPMSK | USB_DOEPMSK_XFERCOMPLMSK;
USB->DIEPMSK |= USB_DIEPMSK_TIMEOUTMSK | USB_DIEPMSK_XFERCOMPLMSK;
/*
* - All EP OUT shared a unique OUT FIFO which uses
* * 10 locations in hardware for setup packets + setup control words (up to 3 setup packets).
* * 2 locations for OUT endpoint control words.
* * 16 for largest packet size of 64 bytes. ( TODO Highspeed is 512 bytes)
* * 1 location for global NAK (not required/used here).
* * It is recommended to allocate 2 times the largest packet size, therefore
* Recommended value = 10 + 1 + 2 x (16+2) = 47 --> Let's make it 52
*/
flush_tx_fifo(_USB_GRSTCTL_TXFNUM_FALL); // Flush All
USB->GRXFSIZ = 52;
/* Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word ) */
USB->GNPTXFSIZ = (16 << _USB_GNPTXFSIZ_NPTXFINEPTXF0DEP_SHIFT) | (USB->GRXFSIZ & _USB_GNPTXFSIZ_NPTXFSTADDR_MASK);
/* Ready to receive SETUP packet */
USB->DOEP0TSIZ |= (1 << _USB_DOEP0TSIZ_SUPCNT_SHIFT);
USB->GINTMSK |= USB_GINTMSK_IEPINTMSK | USB_GINTMSK_OEPINTMSK;
}
static void enum_done_processing(void)
{
/* Maximum packet size for EP 0 is set for both directions by writing DIEPCTL */
if((USB->DSTS & _USB_DSTS_ENUMSPD_MASK) == USB_DSTS_ENUMSPD_FS)
{
/* Full Speed (PHY on 48 MHz) */
USB->DOEP0CTL = (USB->DOEP0CTL & ~_USB_DOEP0CTL_MPS_MASK) | _USB_DOEP0CTL_MPS_64B; /* Maximum Packet Size 64 bytes */
USB->DOEP0CTL &= ~_USB_DOEP0CTL_STALL_MASK; /* clear Stall */
xfer_status[0][TUSB_DIR_OUT].max_size = 64;
xfer_status[0][TUSB_DIR_IN].max_size = 64;
}
else
{
/* Low Speed (PHY on 6 MHz) */
USB->DOEP0CTL = (USB->DOEP0CTL & ~_USB_DOEP0CTL_MPS_MASK) | _USB_DOEP0CTL_MPS_8B; /* Maximum Packet Size 64 bytes */
USB->DOEP0CTL &= ~_USB_DOEP0CTL_STALL_MASK; /* clear Stall */
xfer_status[0][TUSB_DIR_OUT].max_size = 8;
xfer_status[0][TUSB_DIR_IN].max_size = 8;
}
}
/*------------------------------------------------------------------*/
/* Controller API */
/*------------------------------------------------------------------*/
void dcd_init(uint8_t rhport)
{
(void) rhport;
/* Reset Core */
USB->PCGCCTL &= ~USB_PCGCCTL_STOPPCLK;
USB->PCGCCTL &= ~(USB_PCGCCTL_PWRCLMP | USB_PCGCCTL_RSTPDWNMODULE);
/* Core Soft Reset */
USB->GRSTCTL |= USB_GRSTCTL_CSFTRST;
while(USB->GRSTCTL & USB_GRSTCTL_CSFTRST);
while(!(USB->GRSTCTL & USB_GRSTCTL_AHBIDLE));
/* Enable PHY pins */
USB->ROUTE = USB_ROUTE_PHYPEN;
dcd_disconnect(rhport);
/*
* Set device speed (Full speed PHY)
* Stall on non-zero len status OUT packets (ctrl transfers)
* periodic frame interval to 80%
*/
USB->DCFG = (USB->DCFG & ~(_USB_DCFG_DEVSPD_MASK | _USB_DCFG_PERFRINT_MASK)) | USB_DCFG_DEVSPD_FS | USB_DCFG_NZSTSOUTHSHK;
/* Enable Global Interrupts */
USB->GAHBCFG = (USB->GAHBCFG & ~_USB_GAHBCFG_HBSTLEN_MASK) | USB_GAHBCFG_GLBLINTRMSK;
/* Force Device Mode */
USB->GUSBCFG = (USB->GUSBCFG & ~(GUSBCFG_WO_BITMASK | USB_GUSBCFG_FORCEHSTMODE)) | USB_GUSBCFG_FORCEDEVMODE;
/* No Overrides */
USB->GOTGCTL &= ~(USB_GOTGCTL_BVALIDOVVAL | USB_GOTGCTL_BVALIDOVEN | USB_GOTGCTL_VBVALIDOVVAL);
/* Ignore frame numbers on ISO transfers. */
USB->DCTL = (USB->DCTL & ~DCTL_WO_BITMASK) | USB_DCTL_IGNRFRMNUM;
/* Setting SNAKs */
USB->DOEP0CTL |= USB_DIEP_CTL_SNAK;
for(uint8_t i = 0; i < EP_COUNT - 1; i++)
{
USB->DOEP[i].CTL |= USB_DIEP_CTL_SNAK;
}
/* D. Interruption masking */
/* Disable all device interrupts */
USB->DIEPMSK = 0;
USB->DOEPMSK = 0;
USB->DAINTMSK = 0;
USB->DIEPEMPMSK = 0;
USB->GINTMSK = 0;
USB->GOTGINT = ~0U; /* clear OTG ints */
USB->GINTSTS = ~0U; /* clear pending ints */
USB->GINTMSK = USB_GINTMSK_MODEMISMSK |
#if USE_SOF
USB_GINTMSK_SOFMSK |
#endif
USB_GINTMSK_ERLYSUSPMSK |
USB_GINTMSK_USBSUSPMSK |
USB_GINTMSK_USBRSTMSK |
USB_GINTMSK_ENUMDONEMSK |
USB_GINTMSK_RESETDETMSK |
USB_GINTMSK_DISCONNINTMSK;
NVIC_ClearPendingIRQ(USB_IRQn);
dcd_connect(rhport);
}
void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
{
(void) rhport;
USB->DCFG = (USB->DCFG & ~_USB_DCFG_DEVADDR_MASK) | (dev_addr << _USB_DCFG_DEVADDR_SHIFT);
/* Response with status after changing device address */
dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0);
}
void dcd_remote_wakeup(uint8_t rhport)
{
(void) rhport;
}
void dcd_connect(uint8_t rhport)
{
(void) rhport;
/* connect by enabling internal pull-up resistor on D+/D- */
USB->DCTL &= ~(DCTL_WO_BITMASK | USB_DCTL_SFTDISCON);
}
void dcd_disconnect(uint8_t rhport)
{
(void) rhport;
/* disconnect by disabling internal pull-up resistor on D+/D- */
USB->DCTL = (USB->DCTL & ~(DCTL_WO_BITMASK)) | USB_DCTL_SFTDISCON;
}
/*------------------------------------------------------------------*/
/* DCD Endpoint Port */
/*------------------------------------------------------------------*/
void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if(dir == TUSB_DIR_IN)
{
if(epnum == 0)
{
USB->DIEP0CTL = (USB->DIEP0CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP0CTL_SNAK | USB_DIEP0CTL_STALL;
flush_tx_fifo(_USB_GRSTCTL_TXFNUM_F0);
}
else
{
/* Only disable currently enabled non-control endpoint */
if(USB->DIEP[epnum - 1].CTL & USB_DIEP_CTL_EPENA)
{
USB->DIEP[epnum - 1].CTL = (USB->DIEP[epnum - 1].CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP_CTL_EPDIS | USB_DIEP_CTL_SNAK | USB_DIEP_CTL_STALL;
while(!(USB->DIEP[epnum - 1].INT & USB_DIEP_INT_EPDISBLD));
USB->DIEP[epnum - 1].INT |= USB_DIEP_INT_EPDISBLD;
}
else
{
USB->DIEP[epnum - 1].CTL = (USB->DIEP[epnum - 1].CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP_CTL_SNAK | USB_DIEP_CTL_STALL;
}
/* Flush the FIFO */
uint8_t const fifo_num = ((USB->DIEP[epnum - 1].CTL & _USB_DIEP_CTL_TXFNUM_MASK) >> _USB_DIEP_CTL_TXFNUM_SHIFT);
flush_tx_fifo(fifo_num);
}
}
else
{
if(epnum == 0)
{
USB->DOEP0CTL = (USB->DOEP0CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP0CTL_STALL;
}
else
{
/* Only disable currently enabled non-control endpoint */
if(USB->DOEP[epnum - 1].CTL & USB_DIEP_CTL_EPENA)
{
/* Asserting GONAK is required to STALL an OUT endpoint. */
USB->DCTL |= USB_DCTL_SGOUTNAK;
while(!(USB->GINTSTS & USB_GINTSTS_GOUTNAKEFF));
/* Disable the endpoint. Note that only STALL and not SNAK is set here. */
USB->DOEP[epnum - 1].CTL = (USB->DOEP[epnum - 1].CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP_CTL_EPDIS | USB_DIEP_CTL_STALL;
while(USB->DOEP[epnum - 1].INT & USB_DIEP_INT_EPDISBLD);
USB->DOEP[epnum - 1].INT |= USB_DIEP_INT_EPDISBLD;
/* Allow other OUT endpoints to keep receiving. */
USB->DCTL |= USB_DCTL_CGOUTNAK;
}
else
{
USB->DIEP[epnum - 1].CTL = (USB->DIEP[epnum - 1].CTL & ~DEPCTL_WO_BITMASK) | USB_DIEP_CTL_STALL;
}
}
}
}
void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
{
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
if(dir == TUSB_DIR_IN)
{
if(epnum == 0)
{
USB->DIEP0CTL &= ~(DEPCTL_WO_BITMASK | USB_DIEP0CTL_STALL);
}
else
{
USB->DIEP[epnum - 1].CTL &= ~(DEPCTL_WO_BITMASK | USB_DIEP_CTL_STALL);
/* Required by USB spec to reset DATA toggle bit to DATA0 on interrupt and bulk endpoints. */
uint8_t eptype = (USB->DIEP[epnum - 1].CTL & _USB_DIEP_CTL_EPTYPE_MASK) >> _USB_DIEP_CTL_EPTYPE_SHIFT;
if((eptype == _USB_DIEP_CTL_EPTYPE_BULK) || (eptype == _USB_DIEP_CTL_EPTYPE_INT))
{
USB->DIEP[epnum - 1].CTL |= USB_DIEP_CTL_SETD0PIDEF;
}
}
}
else
{
if(epnum == 0)
{
USB->DOEP0CTL &= ~(DEPCTL_WO_BITMASK | USB_DOEP0CTL_STALL);
}
else
{
USB->DOEP[epnum - 1].CTL &= ~(DEPCTL_WO_BITMASK | USB_DOEP_CTL_STALL);
/* Required by USB spec to reset DATA toggle bit to DATA0 on interrupt and bulk endpoints. */
uint8_t eptype = (USB->DOEP[epnum - 1].CTL & _USB_DOEP_CTL_EPTYPE_MASK) >> _USB_DOEP_CTL_EPTYPE_SHIFT;
if((eptype == _USB_DOEP_CTL_EPTYPE_BULK) || (eptype == _USB_DOEP_CTL_EPTYPE_INT))
{
USB->DOEP[epnum - 1].CTL |= USB_DOEP_CTL_SETD0PIDEF;
}
}
}
}
bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
{
(void)rhport;
uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress);
uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress);
TU_ASSERT(p_endpoint_desc->wMaxPacketSize.size <= 64);
TU_ASSERT(epnum < EP_COUNT);
TU_ASSERT(epnum != 0);
xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir);
xfer->max_size = p_endpoint_desc->wMaxPacketSize.size;
if(dir == TUSB_DIR_OUT)
{
USB->DOEP[epnum - 1].CTL |= USB_DOEP_CTL_USBACTEP |
(p_endpoint_desc->bmAttributes.xfer << _USB_DOEP_CTL_EPTYPE_SHIFT) |
(p_endpoint_desc->wMaxPacketSize.size << _USB_DOEP_CTL_MPS_SHIFT);
USB->DAINTMSK |= (1 << (_USB_DAINTMSK_OUTEPMSK0_SHIFT + epnum));
}
else
{
uint8_t fifo_num = get_free_fifo();
TU_ASSERT(fifo_num != 0);
USB->DIEP[epnum - 1].CTL &= ~(_USB_DIEP_CTL_TXFNUM_MASK | _USB_DIEP_CTL_EPTYPE_MASK | USB_DIEP_CTL_SETD0PIDEF | _USB_DIEP_CTL_MPS_MASK);
USB->DIEP[epnum - 1].CTL |= USB_DIEP_CTL_USBACTEP |
(fifo_num << _USB_DIEP_CTL_TXFNUM_SHIFT) |
(p_endpoint_desc->bmAttributes.xfer << _USB_DIEP_CTL_EPTYPE_SHIFT) |
((p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS) ? USB_DIEP_CTL_SETD0PIDEF : 0) |
(p_endpoint_desc->wMaxPacketSize.size << 0);
USB->DAINTMSK |= (1 << epnum);
/* Both TXFD and TXSA are in unit of 32-bit words. */
/* IN FIFO 0 was configured during enumeration, hence the "+ 16". */
uint16_t const allocated_size = (USB->GRXFSIZ & _USB_GRXFSIZ_RXFDEP_MASK) + 16;
uint16_t const fifo_size = (EP_FIFO_SIZE/4 - allocated_size) / (EP_FIFO_NUM-1);
uint32_t const fifo_offset = allocated_size + fifo_size*(fifo_num-1);
/* DIEPTXF starts at FIFO #1. */
volatile uint32_t* usb_dieptxf = &USB->DIEPTXF1;
usb_dieptxf[epnum - 1] = (fifo_size << _USB_DIEPTXF1_INEPNTXFDEP_SHIFT) | fifo_offset;
}
return true;
}
bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
{
(void)rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
xfer->buffer = buffer;
xfer->total_len = total_bytes;
xfer->queued_len = 0;
xfer->short_packet = false;
uint16_t num_packets = (total_bytes / xfer->max_size);
uint8_t short_packet_size = total_bytes % xfer->max_size;
// Zero-size packet is special case.
if(short_packet_size > 0 || (total_bytes == 0))
{
num_packets++;
}
// IN and OUT endpoint xfers are interrupt-driven, we just schedule them
// here.
if(dir == TUSB_DIR_IN)
{
if(epnum == 0)
{
// A full IN transfer (multiple packets, possibly) triggers XFRC.
USB->DIEP0TSIZ = (num_packets << _USB_DIEP0TSIZ_PKTCNT_SHIFT) | total_bytes;
USB->DIEP0CTL |= USB_DIEP0CTL_EPENA | USB_DIEP0CTL_CNAK; // Enable | CNAK
}
else
{
// A full IN transfer (multiple packets, possibly) triggers XFRC.
USB->DIEP[epnum - 1].TSIZ = (num_packets << _USB_DIEP_TSIZ_PKTCNT_SHIFT) | total_bytes;
USB->DIEP[epnum - 1].CTL |= USB_DIEP_CTL_EPENA | USB_DIEP_CTL_CNAK; // Enable | CNAK
}
// Enable fifo empty interrupt only if there are something to put in the fifo.
if(total_bytes != 0)
{
USB->DIEPEMPMSK |= (1 << epnum);
}
}
else
{
if(epnum == 0)
{
// A full IN transfer (multiple packets, possibly) triggers XFRC.
USB->DOEP0TSIZ |= (1 << _USB_DOEP0TSIZ_PKTCNT_SHIFT) | ((xfer->max_size & _USB_DOEP0TSIZ_XFERSIZE_MASK) << _USB_DOEP0TSIZ_XFERSIZE_SHIFT);
USB->DOEP0CTL |= USB_DOEP0CTL_EPENA | USB_DOEP0CTL_CNAK;
}
else
{
// A full IN transfer (multiple packets, possibly) triggers XFRC.
USB->DOEP[epnum - 1].TSIZ |= (1 << _USB_DOEP_TSIZ_PKTCNT_SHIFT) | ((xfer->max_size & _USB_DOEP_TSIZ_XFERSIZE_MASK) << _USB_DOEP_TSIZ_XFERSIZE_SHIFT);
USB->DOEP[epnum - 1].CTL |= USB_DOEP_CTL_EPENA | USB_DOEP_CTL_CNAK;
}
}
return true;
}
/*------------------------------------------------------------------*/
/* IRQ */
/*------------------------------------------------------------------*/
void dcd_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USB_IRQn);
}
void dcd_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USB_IRQn);
}
static void receive_packet(xfer_ctl_t *xfer, uint16_t xfer_size)
{
uint16_t remaining = xfer->total_len - xfer->queued_len;
uint16_t to_recv_size;
if(remaining <= xfer->max_size)
{
/* Avoid buffer overflow. */
to_recv_size = (xfer_size > remaining) ? remaining : xfer_size;
}
else
{
/* Room for full packet, choose recv_size based on what the microcontroller claims. */
to_recv_size = (xfer_size > xfer->max_size) ? xfer->max_size : xfer_size;
}
uint8_t to_recv_rem = to_recv_size % 4;
uint16_t to_recv_size_aligned = to_recv_size - to_recv_rem;
/* Do not assume xfer buffer is aligned. */
uint8_t *base = (xfer->buffer + xfer->queued_len);
/* This for loop always runs at least once- skip if less than 4 bytes to collect. */
if(to_recv_size >= 4)
{
for(uint16_t i = 0; i < to_recv_size_aligned; i += 4)
{
uint32_t tmp = (*USB->FIFO0D);
base[i] = tmp & 0x000000FF;
base[i + 1] = (tmp & 0x0000FF00) >> 8;
base[i + 2] = (tmp & 0x00FF0000) >> 16;
base[i + 3] = (tmp & 0xFF000000) >> 24;
}
}
/* Do not read invalid bytes from RX FIFO. */
if(to_recv_rem != 0)
{
uint32_t tmp = (*USB->FIFO0D);
uint8_t *last_32b_bound = base + to_recv_size_aligned;
last_32b_bound[0] = tmp & 0x000000FF;
if(to_recv_rem > 1)
{
last_32b_bound[1] = (tmp & 0x0000FF00) >> 8;
}
if(to_recv_rem > 2)
{
last_32b_bound[2] = (tmp & 0x00FF0000) >> 16;
}
}
xfer->queued_len += xfer_size;
/* Per USB spec, a short OUT packet (including length 0) is always */
/* indicative of the end of a transfer (at least for ctl, bulk, int). */
xfer->short_packet = (xfer_size < xfer->max_size);
}
static void transmit_packet(xfer_ctl_t *xfer, uint8_t fifo_num)
{
uint16_t remaining;
if(fifo_num == 0)
{
remaining = (USB->DIEP0TSIZ & 0x7FFFFU) >> _USB_DIEP0TSIZ_XFERSIZE_SHIFT;
}
else
{
remaining = (USB->DIEP[fifo_num - 1].TSIZ & 0x7FFFFU) >> _USB_DIEP_TSIZ_XFERSIZE_SHIFT;
}
xfer->queued_len = xfer->total_len - remaining;
uint16_t to_xfer_size = (remaining > xfer->max_size) ? xfer->max_size : remaining;
uint8_t to_xfer_rem = to_xfer_size % 4;
uint16_t to_xfer_size_aligned = to_xfer_size - to_xfer_rem;
/* Buffer might not be aligned to 32b, so we need to force alignment by copying to a temp var. */
uint8_t *base = (xfer->buffer + xfer->queued_len);
/* This for loop always runs at least once- skip if less than 4 bytes to send off. */
if(to_xfer_size >= 4)
{
for(uint16_t i = 0; i < to_xfer_size_aligned; i += 4)
{
uint32_t tmp = base[i] | (base[i + 1] << 8) | (base[i + 2] << 16) | (base[i + 3] << 24);
*tx_fifo[fifo_num] = tmp;
}
}
/* Do not read beyond end of buffer if not divisible by 4. */
if(to_xfer_rem != 0)
{
uint32_t tmp = 0;
uint8_t *last_32b_bound = base + to_xfer_size_aligned;
tmp |= last_32b_bound[0];
if(to_xfer_rem > 1)
{
tmp |= (last_32b_bound[1] << 8);
}
if(to_xfer_rem > 2)
{
tmp |= (last_32b_bound[2] << 16);
}
*tx_fifo[fifo_num] = tmp;
}
}
static void read_rx_fifo(void)
{
/*
* Pop control word off FIFO (completed xfers will have 2 control words,
* we only pop one ctl word each interrupt).
*/
uint32_t const ctl_word = USB->GRXSTSP;
uint8_t const pktsts = (ctl_word & _USB_GRXSTSP_PKTSTS_MASK) >> _USB_GRXSTSP_PKTSTS_SHIFT;
uint8_t const epnum = (ctl_word & _USB_GRXSTSP_CHNUM_MASK ) >> _USB_GRXSTSP_CHNUM_SHIFT;
uint16_t const bcnt = (ctl_word & _USB_GRXSTSP_BCNT_MASK ) >> _USB_GRXSTSP_BCNT_SHIFT;
switch(pktsts)
{
case 0x01: /* Global OUT NAK (Interrupt) */
break;
case 0x02:
{
/* Out packet recvd */
xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT);
receive_packet(xfer, bcnt);
}
break;
case 0x03:
/* Out packet done (Interrupt) */
break;
case 0x04:
/* Step 2: Setup transaction completed (Interrupt) */
/* After this event, OEPINT interrupt will occur with SETUP bit set */
if(epnum == 0)
{
USB->DOEP0TSIZ |= (1 << _USB_DOEP0TSIZ_SUPCNT_SHIFT);
}
break;
case 0x06:
{
/* Step1: Setup data packet received */
/*
* We can receive up to three setup packets in succession, but
* only the last one is valid. Therefore we just overwrite it
*/
_setup_packet[0] = (*USB->FIFO0D);
_setup_packet[1] = (*USB->FIFO0D);
}
break;
default:
/* Invalid, breakpoint. */
TU_BREAKPOINT();
break;
}
}
static void handle_epout_ints(void)
{
// GINTSTS will be cleared with DAINT == 0
// DAINT for a given EP clears when DOEPINTx is cleared.
// DOEPINT will be cleared when DAINT's out bits are cleared.
for(uint8_t n = 0; n < EP_COUNT; n++)
{
xfer_ctl_t *xfer = XFER_CTL_BASE(n, TUSB_DIR_OUT);
if(n == 0)
{
if(USB->DAINT & (1 << (_USB_DAINT_OUTEPINT0_SHIFT + n)))
{
// SETUP packet Setup Phase done.
if((USB->DOEP0INT & USB_DOEP0INT_SETUP))
{
USB->DOEP0INT = USB_DOEP0INT_STUPPKTRCVD | USB_DOEP0INT_SETUP; // clear
dcd_event_setup_received(0, (uint8_t *)&_setup_packet[0], true);
}
// OUT XFER complete (single packet).q
if(USB->DOEP0INT & USB_DOEP0INT_XFERCOMPL)
{
USB->DOEP0INT = USB_DOEP0INT_XFERCOMPL;
// Transfer complete if short packet or total len is transferred
if(xfer->short_packet || (xfer->queued_len == xfer->total_len))
{
xfer->short_packet = false;
dcd_event_xfer_complete(0, n, xfer->queued_len, XFER_RESULT_SUCCESS, true);
}
else
{
// Schedule another packet to be received.
USB->DOEP0TSIZ |= (1 << _USB_DOEP0TSIZ_PKTCNT_SHIFT) | ((xfer->max_size & _USB_DOEP0TSIZ_XFERSIZE_MASK) << _USB_DOEP0TSIZ_XFERSIZE_SHIFT);
USB->DOEP0CTL |= USB_DOEP0CTL_EPENA | USB_DOEP0CTL_CNAK;
}
}
}
}
else
{
if(USB->DAINT & (1 << (_USB_DAINT_OUTEPINT0_SHIFT + n)))
{
// SETUP packet Setup Phase done.
if((USB->DOEP[n - 1].INT & USB_DOEP_INT_SETUP))
{
USB->DOEP[n - 1].INT = USB_DOEP_INT_STUPPKTRCVD | USB_DOEP_INT_SETUP; // clear
dcd_event_setup_received(0, (uint8_t *)&_setup_packet[0], true);
}
// OUT XFER complete (single packet).q
if(USB->DOEP[n - 1].INT & USB_DOEP_INT_XFERCOMPL)
{
USB->DOEP[n - 1].INT = USB_DOEP_INT_XFERCOMPL;
// Transfer complete if short packet or total len is transferred
if(xfer->short_packet || (xfer->queued_len == xfer->total_len))
{
xfer->short_packet = false;
dcd_event_xfer_complete(0, n, xfer->queued_len, XFER_RESULT_SUCCESS, true);
}
else
{
// Schedule another packet to be received.
USB->DOEP[n - 1].TSIZ |= (1 << _USB_DOEP_TSIZ_PKTCNT_SHIFT) | ((xfer->max_size & _USB_DOEP_TSIZ_XFERSIZE_MASK) << _USB_DOEP_TSIZ_XFERSIZE_SHIFT);
USB->DOEP[n - 1].CTL |= USB_DOEP_CTL_EPENA | USB_DOEP_CTL_CNAK;
}
}
}
}
}
}
static void handle_epin_ints(void)
{
for(uint32_t n = 0; n < EP_COUNT; n++)
{
xfer_ctl_t *xfer = &xfer_status[n][TUSB_DIR_IN];
if(n == 0)
{
if(USB->DAINT & (1 << n))
{
/* IN XFER complete (entire xfer). */
if(USB->DIEP0INT & USB_DIEP0INT_XFERCOMPL)
{
USB->DIEP0INT = USB_DIEP0INT_XFERCOMPL;
dcd_event_xfer_complete(0, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true);
}
/* XFER FIFO empty */
if(USB->DIEP0INT & USB_DIEP0INT_TXFEMP)
{
USB->DIEP0INT = USB_DIEP0INT_TXFEMP;
transmit_packet(xfer, n);
/* Turn off TXFE if all bytes are written. */
if(xfer->queued_len == xfer->total_len)
{
USB->DIEPEMPMSK &= ~(1 << n);
}
}
/* XFER Timeout */
if(USB->DIEP0INT & USB_DIEP0INT_TIMEOUT)
{
/* Clear interrupt or enpoint will hang. */
USB->DIEP0INT = USB_DIEP0INT_TIMEOUT;
}
}
}
else
{
if(USB->DAINT & (1 << n))
{
/* IN XFER complete (entire xfer). */
if(USB->DIEP[n - 1].INT & USB_DIEP_INT_XFERCOMPL)
{
USB->DIEP[n - 1].INT = USB_DIEP_INT_XFERCOMPL;
dcd_event_xfer_complete(0, n | TUSB_DIR_IN_MASK, xfer->total_len, XFER_RESULT_SUCCESS, true);
}
/* XFER FIFO empty */
if(USB->DIEP[n - 1].INT & USB_DIEP_INT_TXFEMP)
{
USB->DIEP[n - 1].INT = USB_DIEP_INT_TXFEMP;
transmit_packet(xfer, n);
/* Turn off TXFE if all bytes are written. */
if(xfer->queued_len == xfer->total_len)
{
USB->DIEPEMPMSK &= ~(1 << n);
}
}
/* XFER Timeout */
if(USB->DIEP[n - 1].INT & USB_DIEP_INT_TIMEOUT)
{
/* Clear interrupt or enpoint will hang. */
USB->DIEP[n - 1].INT = USB_DIEP_INT_TIMEOUT;
}
}
}
}
}
void dcd_int_handler(uint8_t rhport)
{
(void) rhport;
const uint32_t int_status = USB->GINTSTS;
/* USB Reset */
if(int_status & USB_GINTSTS_USBRST)
{
/* start of reset */
USB->GINTSTS = USB_GINTSTS_USBRST;
/* FIFOs will be reassigned when the endpoints are reopen */
_allocated_fifos = 1;
bus_reset();
}
/* Reset detected Interrupt */
if(int_status & USB_GINTSTS_RESETDET)
{
USB->GINTSTS = USB_GINTSTS_RESETDET;
bus_reset();
}
/* Enumeration Done */
if(int_status & USB_GINTSTS_ENUMDONE)
{
/* This interrupt is considered the end of reset. */
USB->GINTSTS = USB_GINTSTS_ENUMDONE;
enum_done_processing();
dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
}
/* OTG Interrupt */
if(int_status & USB_GINTSTS_OTGINT)
{
/* OTG INT bit is read-only */
uint32_t const otg_int = USB->GOTGINT;
if(otg_int & USB_GOTGINT_SESENDDET)
{
dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true);
}
USB->GOTGINT = otg_int;
}
#if USE_SOF
if(int_status & USB_GINTSTS_SOF)
{
USB->GINTSTS = USB_GINTSTS_SOF;
dcd_event_bus_signal(0, DCD_EVENT_SOF, true);
}
#endif
/* RxFIFO Non-Empty */
if(int_status & USB_GINTSTS_RXFLVL)
{
/* RXFLVL bit is read-only */
/* Mask out RXFLVL while reading data from FIFO */
USB->GINTMSK &= ~USB_GINTMSK_RXFLVLMSK;
read_rx_fifo();
USB->GINTMSK |= USB_GINTMSK_RXFLVLMSK;
}
/* OUT Endpoints Interrupt */
if(int_status & USB_GINTMSK_OEPINTMSK)
{
/* OEPINT is read-only */
handle_epout_ints();
}
/* IN Endpoints Interrupt */
if(int_status & USB_GINTMSK_IEPINTMSK)
{
/* IEPINT bit read-only */
handle_epin_ints();
}
/* unhandled */
USB->GINTSTS |= USB_GINTSTS_CURMOD |
USB_GINTSTS_MODEMIS |
USB_GINTSTS_OTGINT |
USB_GINTSTS_NPTXFEMP |
USB_GINTSTS_GINNAKEFF |
USB_GINTSTS_GOUTNAKEFF |
USB_GINTSTS_ERLYSUSP |
USB_GINTSTS_USBSUSP |
USB_GINTSTS_ISOOUTDROP |
USB_GINTSTS_EOPF |
USB_GINTSTS_EPMIS |
USB_GINTSTS_INCOMPISOIN |
USB_GINTSTS_INCOMPLP |
USB_GINTSTS_FETSUSP |
USB_GINTSTS_PTXFEMP;
}
#endif