andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

hal clean up

Browse Source 
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
This commit is contained in:
hathach
2018-12-05 13:20:25 +07:00
parent 6048a3bff4
commit a73017fdc2
17 changed files with 125 additions and 290 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
src/portable/microchip/samd21/dcd_samd21.c
View File

@@ -72,6 +72,20 @@ static void bus_reset(void) {
bool dcd_init (uint8_t rhport)
{
(void) rhport;
// Reset to get in a clean state.
USB->DEVICE.CTRLA.bit.SWRST = true;
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 0) {}
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 1) {}
USB->DEVICE.PADCAL.bit.TRANSP = (*((uint32_t*) USB_FUSES_TRANSP_ADDR) & USB_FUSES_TRANSP_Msk) >> USB_FUSES_TRANSP_Pos;
USB->DEVICE.PADCAL.bit.TRANSN = (*((uint32_t*) USB_FUSES_TRANSN_ADDR) & USB_FUSES_TRANSN_Msk) >> USB_FUSES_TRANSN_Pos;
USB->DEVICE.PADCAL.bit.TRIM = (*((uint32_t*) USB_FUSES_TRIM_ADDR) & USB_FUSES_TRIM_Msk) >> USB_FUSES_TRIM_Pos;
USB->DEVICE.QOSCTRL.bit.CQOS = USB_QOSCTRL_CQOS_HIGH_Val;
USB->DEVICE.QOSCTRL.bit.DQOS = USB_QOSCTRL_DQOS_HIGH_Val;
// Configure registers
USB->DEVICE.DESCADD.reg = (uint32_t) &sram_registers;
USB->DEVICE.CTRLB.reg = USB_DEVICE_CTRLB_SPDCONF_FS;
USB->DEVICE.CTRLA.reg = USB_CTRLA_MODE_DEVICE | USB_CTRLA_ENABLE | USB_CTRLA_RUNSTDBY;
@@ -82,6 +96,18 @@ bool dcd_init (uint8_t rhport)
return true;
}
void dcd_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USB_IRQn);
}
void dcd_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USB_IRQn);
}
void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
{
(void) rhport;

81
src/portable/microchip/samd21/hal_samd21.c
View File

@@ -1,81 +0,0 @@
/**************************************************************************/
/*!
@file hal_nrf5x.c
@author hathach
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2018, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAMD21
#include "sam.h"
#include "tusb_hal.h"
/*------------------------------------------------------------------*/
/* TUSB HAL
*------------------------------------------------------------------*/
bool tusb_hal_init(void)
{
// Reset to get in a clean state.
USB->DEVICE.CTRLA.bit.SWRST = true;
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 0) {}
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 1) {}
USB->DEVICE.PADCAL.bit.TRANSP = (*((uint32_t*) USB_FUSES_TRANSP_ADDR) & USB_FUSES_TRANSP_Msk) >> USB_FUSES_TRANSP_Pos;
USB->DEVICE.PADCAL.bit.TRANSN = (*((uint32_t*) USB_FUSES_TRANSN_ADDR) & USB_FUSES_TRANSN_Msk) >> USB_FUSES_TRANSN_Pos;
USB->DEVICE.PADCAL.bit.TRIM = (*((uint32_t*) USB_FUSES_TRIM_ADDR) & USB_FUSES_TRIM_Msk) >> USB_FUSES_TRIM_Pos;
USB->DEVICE.QOSCTRL.bit.CQOS = USB_QOSCTRL_CQOS_HIGH_Val;
USB->DEVICE.QOSCTRL.bit.DQOS = USB_QOSCTRL_DQOS_HIGH_Val;
tusb_hal_int_enable(0);
return true;
}
void tusb_hal_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USB_IRQn);
}
void tusb_hal_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USB_IRQn);
}
#endif

31
src/portable/microchip/samd51/dcd_samd51.c
View File

@@ -73,6 +73,19 @@ bool dcd_init (uint8_t rhport)
{
(void) rhport;
// Reset to get in a clean state.
USB->DEVICE.CTRLA.bit.SWRST = true;
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 0) {}
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 1) {}
USB->DEVICE.PADCAL.bit.TRANSP = (*((uint32_t*) USB_FUSES_TRANSP_ADDR) & USB_FUSES_TRANSP_Msk) >> USB_FUSES_TRANSP_Pos;
USB->DEVICE.PADCAL.bit.TRANSN = (*((uint32_t*) USB_FUSES_TRANSN_ADDR) & USB_FUSES_TRANSN_Msk) >> USB_FUSES_TRANSN_Pos;
USB->DEVICE.PADCAL.bit.TRIM = (*((uint32_t*) USB_FUSES_TRIM_ADDR) & USB_FUSES_TRIM_Msk) >> USB_FUSES_TRIM_Pos;
USB->DEVICE.QOSCTRL.bit.CQOS = 3;
USB->DEVICE.QOSCTRL.bit.DQOS = 3;
// Configure registers
USB->DEVICE.DESCADD.reg = (uint32_t) &sram_registers;
USB->DEVICE.CTRLB.reg = USB_DEVICE_CTRLB_SPDCONF_FS;
USB->DEVICE.CTRLA.reg = USB_CTRLA_MODE_DEVICE | USB_CTRLA_ENABLE | USB_CTRLA_RUNSTDBY;
@@ -82,6 +95,24 @@ bool dcd_init (uint8_t rhport)
return true;
}
void dcd_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USB_0_IRQn);
NVIC_EnableIRQ(USB_1_IRQn);
NVIC_EnableIRQ(USB_2_IRQn);
NVIC_EnableIRQ(USB_3_IRQn);
}
void dcd_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USB_3_IRQn);
NVIC_DisableIRQ(USB_2_IRQn);
NVIC_DisableIRQ(USB_1_IRQn);
NVIC_DisableIRQ(USB_0_IRQn);
}
void dcd_set_address (uint8_t rhport, uint8_t dev_addr)
{
(void) rhport;

86
src/portable/microchip/samd51/hal_samd51.c
View File

@@ -1,86 +0,0 @@
/**************************************************************************/
/*!
@file hal_nrf5x.c
@author hathach
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2018, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "tusb_option.h"
#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_SAMD51
#include "sam.h"
#include "tusb_hal.h"
/*------------------------------------------------------------------*/
/* TUSB HAL
*------------------------------------------------------------------*/
bool tusb_hal_init(void)
{
// Reset to get in a clean state.
USB->DEVICE.CTRLA.bit.SWRST = true;
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 0) {}
while (USB->DEVICE.SYNCBUSY.bit.SWRST == 1) {}
USB->DEVICE.PADCAL.bit.TRANSP = (*((uint32_t*) USB_FUSES_TRANSP_ADDR) & USB_FUSES_TRANSP_Msk) >> USB_FUSES_TRANSP_Pos;
USB->DEVICE.PADCAL.bit.TRANSN = (*((uint32_t*) USB_FUSES_TRANSN_ADDR) & USB_FUSES_TRANSN_Msk) >> USB_FUSES_TRANSN_Pos;
USB->DEVICE.PADCAL.bit.TRIM = (*((uint32_t*) USB_FUSES_TRIM_ADDR) & USB_FUSES_TRIM_Msk) >> USB_FUSES_TRIM_Pos;
USB->DEVICE.QOSCTRL.bit.CQOS = 3;
USB->DEVICE.QOSCTRL.bit.DQOS = 3;
tusb_hal_int_enable(0);
return true;
}
void tusb_hal_int_enable(uint8_t rhport)
{
(void) rhport;
NVIC_EnableIRQ(USB_0_IRQn);
NVIC_EnableIRQ(USB_1_IRQn);
NVIC_EnableIRQ(USB_2_IRQn);
NVIC_EnableIRQ(USB_3_IRQn);
}
void tusb_hal_int_disable(uint8_t rhport)
{
(void) rhport;
NVIC_DisableIRQ(USB_3_IRQn);
NVIC_DisableIRQ(USB_2_IRQn);
NVIC_DisableIRQ(USB_1_IRQn);
NVIC_DisableIRQ(USB_0_IRQn);
}
#endif