auto detect max rhport speed based on mcu

examples/device/audio_4_channel_mic/src/tusb_config.h

@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE

examples/device/audio_test/src/tusb_config.h

@@ -39,11 +39,7 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
 #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
-#endif
 
 #ifndef CFG_TUSB_OS
 #define CFG_TUSB_OS                 OPT_OS_NONE

examples/device/cdc_dual_ports/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/cdc_msc/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dfu/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dfu_runtime/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/dynamic_configuration/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_boot_interface/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || CFG_TUSB_MCU == OPT_MCU_SAMX7X || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_composite/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_composite_freertos/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_generic_inout/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/hid_multiple_interface/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/midi_test/src/tusb_config.h

@@ -45,15 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56 || \
-       CFG_TUSB_MCU == OPT_MCU_FT90X   || CFG_TUSB_MCU == OPT_MCU_FT93X)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/msc_dual_lun/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/net_lwip_webserver/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/uac2_headset/src/tusb_config.h

@@ -42,10 +42,10 @@ extern "C" {
 #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
-#else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+// RHPort max operational speed can defined by board.mk
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 #ifndef CFG_TUSB_OS

examples/device/usbtmc/src/tusb_config.h

@@ -27,14 +27,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/video_capture/src/tusb_config.h

@@ -40,14 +40,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk

examples/device/webusb_serial/src/tusb_config.h

@@ -45,14 +45,9 @@
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+// Default to max (auto) speed for MCU with internal HighSpeed PHY
 #ifndef BOARD_DEVICE_RHPORT_SPEED
-  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+  #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
 // Device mode with rhport and speed defined by board.mk