andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

add stub function to able to build device with EA4357

Browse Source 
- dcd_controller_reset
- dcd_controller_connect
This commit is contained in:
hathach
2013-05-25 16:03:40 +07:00
parent 9b7f24bef2
commit ae02263d81
7 changed files with 200 additions and 51 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
tinyusb/hal/hal.h
View File

@@ -58,13 +58,15 @@
#include "common/compiler/compiler.h"
#if MCU == 0
#error MCU is not defined or supported
#error MCU is not defined or supported yet
#elif MCU == MCU_LPC11UXX
#include "hal_lpc11uxx.h"
#elif MCU == MCU_LPC13UXX
#include "hal_lpc13uxx.h"
#elif MCU == MCU_LPC43XX
#include "hal_lpc43xx.h"
#else
#error MCU is not defined or supported yet
#endif
#ifdef __cplusplus

19
tinyusb/hal/hal_lpc43xx.c
View File

@@ -66,10 +66,12 @@ tusb_error_t hal_init(void)
// reset controller & set role
#if TUSB_CFG_CONTROLLER0_MODE & TUSB_MODE_HOST
hcd_controller_reset(0); // TODO where to place prototype
LPC_USB0->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
hcd_controller_reset(0); // TODO where to place prototype
LPC_USB0->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
#else // TODO OTG
#error device mode is not supported
dcd_controller_reset(0);
LPC_USB0->USBMODE_D = LPC43XX_USBMODE_DEVICE;
dcd_controller_connect(0);
#endif
hal_interrupt_enable(0);
@@ -77,6 +79,7 @@ tusb_error_t hal_init(void)
//------------- USB1 Clock, only use on-chip FS PHY -------------//
#if TUSB_CFG_CONTROLLER1_MODE
// TODO confirm whether device mode require P2_5 or not
scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence, must be high for bus reset occur
/* connect CLK_USB1 to 60 MHz clock */
@@ -85,10 +88,12 @@ tusb_error_t hal_init(void)
LPC_SCU->SFSUSB = (TUSB_CFG_CONTROLLER1_MODE & TUSB_MODE_HOST) ? 0x16 : 0x12; // enable USB1 with on-chip FS PHY
#if TUSB_CFG_CONTROLLER1_MODE & TUSB_MODE_HOST
hcd_controller_reset(1); // TODO where to place prototype
LPC_USB1->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
#else
hcd_controller_reset(1); // TODO where to place prototype
LPC_USB1->USBMODE_H = LPC43XX_USBMODE_HOST | (LPC43XX_USBMODE_VBUS_HIGH << 5);
#else // TODO OTG
dcd_controller_reset(1);
LPC_USB0->USBMODE_D = LPC43XX_USBMODE_DEVICE;
dcd_controller_connect(1);
#endif
LPC_USB1->PORTSC1_D |= (1<<24); // TODO abtract, force port to fullspeed