andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

hil add stm32f723disco, add test flags for device/host/dual

Browse Source
This commit is contained in:
hathach
2024-11-13 13:08:30 +07:00
parent 839ec17292
commit aeae2966a2
8 changed files with 202 additions and 86 deletions
Download Patch File Download Diff File Expand all files Collapse all files

151
test/hil/hil_test.py
View File

@@ -46,6 +46,26 @@ STATUS_SKIPPED = "\033[33mSkipped\033[0m"
verbose = False
WCH_RISCV_CONTENT = """
adapter driver wlinke
adapter speed 6000
transport select sdi
wlink_set_address 0x00000000
set _CHIPNAME wch_riscv
sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0
echo "Ready for Remote Connections"
"""
# -------------------------------------------------------------
# Path
# -------------------------------------------------------------
@@ -147,63 +167,87 @@ def flash_jlink(board, firmware):
return ret
def flash_stlink(board, firmware):
ret = run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go')
def reset_jlink(board):
script = ['halt', 'r', 'go', 'exit']
f_jlink = f'{board["name"]}_reset.jlink'
if not os.path.exists(f_jlink):
with open(f_jlink, 'w') as f:
f.writelines(f'{s}\n' for s in script)
ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}')
return ret
def flash_stlink(board, firmware):
return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go')
def reset_stlink(board):
return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --rst --go')
def flash_stflash(board, firmware):
ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000')
return ret
def reset_stflash(board):
return subprocess.CompletedProcess(args=['dummy'], returncode=0)
def flash_openocd(board, firmware):
ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"')
return ret
def reset_openocd(board):
ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "reset exit"')
return ret
def flash_openocd_wch(board, firmware):
# Content of the wch-riscv.cfg file
cfg_content = """
adapter driver wlinke
adapter speed 6000
transport select sdi
wlink_set_address 0x00000000
set _CHIPNAME wch_riscv
sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0
echo "Ready for Remote Connections"
"""
f_wch = f"wch-riscv_{board['uid']}.cfg"
if not os.path.exists(f_wch):
with open(f_wch, 'w') as file:
file.write(cfg_content)
file.write(WCH_RISCV_CONTENT)
ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} '
f'-c "program {firmware}.elf reset exit"')
return ret
def reset_openocd_wch(board):
f_wch = f"wch-riscv_{board['uid']}.cfg"
if not os.path.exists(f_wch):
with open(f_wch, 'w') as file:
file.write(WCH_RISCV_CONTENT)
ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program reset exit"')
return ret
def flash_openocd_adi(board, firmware):
ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl '
f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"')
return ret
def reset_openocd_adi(board):
ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl '
f'{board["flasher_args"]} -c "program reset exit"')
return ret
def flash_wlink_rs(board, firmware):
# wlink use index for probe selection and lacking usb serial support
ret = run_cmd(f'wlink flash {firmware}.elf')
return ret
def reset_wlink_rs(board):
# wlink use index for probe selection and lacking usb serial support
ret = run_cmd(f'wlink reset')
return ret
def flash_esptool(board, firmware):
port = get_serial_dev(board["flasher_sn"], None, None, 0)
fw_dir = os.path.dirname(f'{firmware}.bin')
@@ -213,28 +257,39 @@ def flash_esptool(board, firmware):
flash_args = f.read().strip().replace('\n', ' ')
command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} '
f'--before=default_reset --after=hard_reset write_flash {flash_args}')
# command = f'echo abc'
ret = run_cmd(command, cwd=fw_dir)
return ret
def reset_esptool(board):
return subprocess.CompletedProcess(args=['dummy'], returncode=0)
def flash_uniflash(board, firmware):
ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex')
return ret
def reset_uniflash(board):
return subprocess.CompletedProcess(args=['dummy'], returncode=0)
# -------------------------------------------------------------
# Tests: dual
# -------------------------------------------------------------
def test_dual_host_info_to_device_cdc(board):
uid = board['uid']
declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']]
port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0)
ser = open_serial_dev(port)
# read from serial, first line should contain vid/pid and serial
# read from cdc, first line should contain vid/pid and serial
data = ser.read(1000)
ser.close()
if len(data) == 0:
assert False, 'No data from device'
lines = data.decode('utf-8').splitlines()
enum_dev_sn = []
for l in lines:
vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l)
@@ -243,12 +298,8 @@ def test_dual_host_info_to_device_cdc(board):
enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}')
if set(declared_devs) != set(enum_dev_sn):
# for pico/pico2 make this test optional
failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}'
if 'raspberry_pi_pico' in board['name']:
print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='')
else:
assert False, failed_msg
failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}'
assert False, failed_msg
return 0
@@ -256,12 +307,17 @@ def test_dual_host_info_to_device_cdc(board):
# Tests: host
# -------------------------------------------------------------
def test_host_device_info(board):
uid = board['uid']
declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']]
port = get_serial_dev(board["flasher_sn"], None, None, 0)
ser = open_serial_dev(port)
# reset device since we can miss the first line
ret = globals()[f'reset_{board["flasher"].lower()}'](board)
assert ret.returncode == 0, 'Failed to reset device'
data = ser.read(1000)
ser.close()
if len(data) == 0:
assert False, 'No data from device'
@@ -274,12 +330,8 @@ def test_host_device_info(board):
enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}')
if set(declared_devs) != set(enum_dev_sn):
# for pico/pico2 make this test optional
failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}'
if 'raspberry_pi_pico' in board['name']:
print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='')
else:
assert False, failed_msg
failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}'
assert False, failed_msg
return 0
@@ -323,7 +375,8 @@ def test_device_cdc_msc(board):
str = b"test_str"
ser.write(str)
ser.flush()
assert ser.read(len(str)) == str, 'CDC wrong data'
rd_str = ser.read(len(str))
assert rd_str == str, f'CDC wrong data: expected: {str} was {rd_str}'
# Block test
data = read_disk_file(uid,0,'README.TXT')
@@ -430,10 +483,14 @@ device_tests = [
'device/hid_boot_interface',
]
host_tests = [
dual_tests = [
'dual/host_info_to_device_cdc',
]
host_test = [
'host/device_info',
]
def test_board(board):
name = board['name']
@@ -444,8 +501,12 @@ def test_board(board):
if 'tests' in board:
board_tests = board['tests']
if 'dev_attached' in board_tests:
test_list += host_tests
if 'device' in board_tests and board_tests['device'] == True:
test_list += list(device_tests)
if 'dual' in board_tests and board_tests['dual'] == True:
test_list += dual_tests
if 'host' in board_tests and board_tests['host'] == True:
test_list += host_test
if 'only' in board_tests:
test_list = board_tests['only']
if 'skip' in board_tests:
@@ -455,7 +516,7 @@ def test_board(board):
print(f'{name:25} {skip:30} ... Skip')
# board_test is added last to disable board's usb
#test_list.append('device/board_test')
test_list.append('device/board_test')
err_count = 0
flags_on_list = [""]
@@ -473,7 +534,7 @@ def test_board(board):
fw_name = f'{fw_dir}/{os.path.basename(test)}'
print(f'{name+f1_str:40} {test:30} ... ', end='')
if not os.path.exists(fw_dir):
if not os.path.exists(fw_dir) or not (os.path.exists(f'{fw_name}.elf') or os.path.exists(f'{fw_name}.bin')):
print('Skip (no binary)')
continue