andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Merge remote-tracking branch 'upstream/master' into h7rs

Browse Source
This commit is contained in:
HiFiPhile
2025-04-12 17:08:49 +02:00
parent b4a762dd58 865e3488f9
commit b2a4407bd5
66 changed files with 1469 additions and 1185 deletions
Download Patch File Download Diff File Expand all files Collapse all files

40
src/portable/analog/max3421/hcd_max3421.c
View File

@@ -252,28 +252,6 @@ static tuh_configure_max3421_t _tuh_cfg = {
.pinctl = 0, // default: negative edge interrupt
};
//--------------------------------------------------------------------+
// API: SPI transfer with MAX3421E
// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application
// - reg_read(), reg_write(): is implemented by this driver, can be used by application
//--------------------------------------------------------------------+
// API to control MAX3421 SPI CS
extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active);
// API to transfer data with MAX3421 SPI
// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only
extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes);
// API to enable/disable MAX3421 INTR pin interrupt
extern void tuh_max3421_int_api(uint8_t rhport, bool enabled);
// API to read MAX3421's register. Implemented by TinyUSB
uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
// API to write MAX3421's register. Implemented by TinyUSB
bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
//--------------------------------------------------------------------+
// SPI Commands and Helper
//--------------------------------------------------------------------+
@@ -632,6 +610,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e
if (daddr == 0 && ep_num == 0) {
ep = &_hcd_data.ep[0];
}else {
if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) {
return true; // already opened
}
ep = allocate_ep();
TU_ASSERT(ep);
ep->daddr = daddr;
@@ -645,6 +626,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport;
uint8_t const ep_num = tu_edpt_number(ep_addr);
tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr);
max3421_ep_t * ep = find_ep_not_addr0(daddr, ep_num, ep_dir);
if (!ep) {
return false; // not opened
}
tu_memclr(ep, sizeof(max3421_ep_t));
return true;
}
/* The microcontroller repeatedly writes the SNDFIFO register R2 to load the FIFO with up to 64 data bytes.
* Then the microcontroller writes the SNDBC register, which this does three things:
* 1. Tells the MAX3421E SIE (Serial Interface Engine) how many bytes in the FIFO to send.

63
src/portable/analog/max3421/hcd_max3421.h Normal file
View File

@@ -0,0 +1,63 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2025 Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef TUSB_HCD_MAX3421_H
#define TUSB_HCD_MAX3421_H
#ifdef __cplusplus
extern "C" {
#endif
//--------------------------------------------------------------------+
// SPI transfer API with MAX3421E are implemented by application
// - spi_cs_api(), spi_xfer_api(), int_api()
//--------------------------------------------------------------------+
// API to control MAX3421 SPI CS
extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active);
// API to transfer data with MAX3421 SPI
// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only
extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes);
// API to enable/disable MAX3421 INTR pin interrupt
extern void tuh_max3421_int_api(uint8_t rhport, bool enabled);
//--------------------------------------------------------------------+
// API for read/write MAX3421 registers
// are implemented by this driver, can be used by application
//--------------------------------------------------------------------+
// API to read MAX3421's register. Implemented by TinyUSB
uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr);
// API to write MAX3421's register. Implemented by TinyUSB
bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr);
#ifdef __cplusplus
}
#endif
#endif

261
src/portable/ehci/ehci.c
View File

@@ -62,8 +62,7 @@
#define QHD_MAX (CFG_TUH_DEVICE_MAX*CFG_TUH_ENDPOINT_MAX + CFG_TUH_HUB)
#define QTD_MAX QHD_MAX
typedef struct
{
typedef struct {
ehci_link_t period_framelist[FRAMELIST_SIZE];
// TODO only implement 1 ms & 2 ms & 4 ms, 8 ms (framelist)
@@ -139,6 +138,12 @@ static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr);
static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc);
static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd);
static void qhd_remove_qtd(ehci_qhd_t *qhd);
TU_ATTR_ALWAYS_INLINE static inline bool qhd_is_periodic(ehci_qhd_t const *qhd) {
return qhd->int_smask != 0;
}
TU_ATTR_ALWAYS_INLINE static inline uint8_t qhd_ep_addr(ehci_qhd_t const *qhd) {
return tu_edpt_addr(qhd->ep_number, qhd->pid);
}
TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr);
TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void);
@@ -146,9 +151,10 @@ static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes)
TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms);
TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport);
TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type);
TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link);
static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr);
TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *entry, uint8_t type);
TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd);
static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr);
static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) {
// maybe have a timeout for status
@@ -175,15 +181,12 @@ static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) {
//--------------------------------------------------------------------+
// HCD API
//--------------------------------------------------------------------+
uint32_t hcd_frame_number(uint8_t rhport)
{
uint32_t hcd_frame_number(uint8_t rhport) {
(void) rhport;
return (ehci_data.uframe_number + ehci_data.regs->frame_index) >> 3;
}
void hcd_port_reset(uint8_t rhport)
{
void hcd_port_reset(uint8_t rhport) {
(void) rhport;
ehci_registers_t* regs = ehci_data.regs;
@@ -204,8 +207,7 @@ void hcd_port_reset(uint8_t rhport)
regs->portsc = portsc;
}
void hcd_port_reset_end(uint8_t rhport)
{
void hcd_port_reset_end(uint8_t rhport) {
(void) rhport;
ehci_registers_t* regs = ehci_data.regs;
@@ -221,32 +223,29 @@ void hcd_port_reset_end(uint8_t rhport)
regs->portsc = portsc;
}
bool hcd_port_connect_status(uint8_t rhport)
{
bool hcd_port_connect_status(uint8_t rhport) {
(void) rhport;
return ehci_data.regs->portsc_bm.current_connect_status;
}
tusb_speed_t hcd_port_speed_get(uint8_t rhport)
{
tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
(void) rhport;
return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed
}
// Close all opened endpoint belong to this device
void hcd_device_close(uint8_t rhport, uint8_t daddr)
{
void hcd_device_close(uint8_t rhport, uint8_t daddr) {
// skip dev0
if (daddr == 0) {
return;
}
// Remove from async list
list_remove_qhd_by_daddr((ehci_link_t *) list_get_async_head(rhport), daddr);
// Remove from async list all endpoints of this device
list_remove_qhd_by_addr((ehci_link_t *) list_get_async_head(rhport), daddr, TUSB_INDEX_INVALID_8);
// Remove from all interval period list
for(uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) {
list_remove_qhd_by_daddr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr);
// Remove from all interval period list of this device
for (uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) {
list_remove_qhd_by_addr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr, TUSB_INDEX_INVALID_8);
}
// Async doorbell (EHCI 4.8.2 for operational details)
@@ -358,12 +357,10 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg)
}
#if 0
static void ehci_stop(uint8_t rhport)
{
static void ehci_stop(uint8_t rhport) {
(void) rhport;
ehci_registers_t* regs = ehci_data.regs;
regs->command_bm.run_stop = 0;
// USB Spec: controller has to stop within 16 uframe = 2 frames
@@ -375,41 +372,46 @@ static void ehci_stop(uint8_t rhport)
// Endpoint API
//--------------------------------------------------------------------+
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
{
(void) rhport;
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
// TODO not support ISO yet
TU_ASSERT (ep_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS);
//------------- Prepare Queue Head -------------//
ehci_qhd_t *p_qhd = (ep_desc->bEndpointAddress == 0) ? qhd_control(dev_addr) : qhd_find_free();
ehci_qhd_t *p_qhd;
if (ep_desc->bEndpointAddress == 0) {
p_qhd = qhd_control(dev_addr);
} else {
if (NULL != qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)) {
return true; // already opened
}
p_qhd = qhd_find_free();
}
TU_ASSERT(p_qhd);
qhd_init(p_qhd, dev_addr, ep_desc);
// control of dev0 is always present as async head
if ( dev_addr == 0 ) return true;
// control of dev0 always exists as async head
if (dev_addr == 0) {
return true;
}
// Insert to list
ehci_link_t * list_head = NULL;
switch (ep_desc->bmAttributes.xfer)
{
switch (ep_desc->bmAttributes.xfer) {
case TUSB_XFER_CONTROL:
case TUSB_XFER_BULK:
list_head = (ehci_link_t*) list_get_async_head(rhport);
break;
list_head = (ehci_link_t *) list_get_async_head(rhport);
break;
case TUSB_XFER_INTERRUPT:
list_head = list_get_period_head(rhport, p_qhd->interval_ms);
break;
break;
case TUSB_XFER_ISOCHRONOUS:
// TODO iso is not supported
break;
break;
default: break;
default:
break;
}
TU_ASSERT(list_head);
@@ -421,8 +423,23 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8])
{
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
ehci_qhd_t* qhd = qhd_get_from_addr(daddr, ep_addr);
TU_VERIFY(qhd != NULL);
ehci_link_t * list_head;
if (qhd_is_periodic(qhd)) {
// interrupt endpoint
list_head = list_get_period_head(rhport, qhd->interval_ms);;
} else {
list_head = (ehci_link_t *) list_get_async_head(rhport);
}
list_remove_qhd_by_addr(list_head, daddr, ep_addr);
return true;
}
bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
(void) rhport;
ehci_qhd_t* qhd = &ehci_data.control[dev_addr].qhd;
@@ -444,14 +461,14 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet
return true;
}
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)
{
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
(void) rhport;
uint8_t const epnum = tu_edpt_number(ep_addr);
uint8_t const dir = tu_edpt_dir(ep_addr);
ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr);
TU_VERIFY(qhd != NULL);
ehci_qtd_t* qtd;
if (epnum == 0) {
@@ -540,8 +557,7 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
// This isr mean it is safe to modify previously removed queue head from async list.
// In tinyusb, queue head is only removed when device is unplugged.
TU_ATTR_ALWAYS_INLINE static inline
void async_advance_isr(uint8_t rhport)
{
void async_advance_isr(uint8_t rhport) {
(void) rhport;
ehci_qhd_t *qhd_pool = ehci_data.qhd_pool;
@@ -612,8 +628,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) {
}
TU_ATTR_ALWAYS_INLINE static inline
void proccess_async_xfer_isr(ehci_qhd_t * const list_head)
{
void proccess_async_xfer_isr(ehci_qhd_t * const list_head) {
ehci_qhd_t *qhd = list_head;
do {
@@ -623,8 +638,7 @@ void proccess_async_xfer_isr(ehci_qhd_t * const list_head)
}
TU_ATTR_ALWAYS_INLINE static inline
void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms)
{
void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) {
uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u);
ehci_link_t next_link = *list_get_period_head(rhport, interval_ms);
@@ -726,51 +740,55 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_
return (ehci_link_t*) tu_align32(p_link->address);
}
TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type)
{
new->address = current->address;
current->address = ((uint32_t) new) | (new_type << 1);
TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *entry, uint8_t type) {
entry->address = current->address;
current->address = ((uint32_t) entry) | (type << 1);
}
// Remove all queue head belong to this device address
static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) {
ehci_link_t* prev = list_head;
// Remove a queue head from the list.
// Per EHCI 4.8.2 the removed qhd's next is linked to list head (which always reachable by Host Controller)
// TODO support iTD/siTD
TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd) {
// TODO deactivate all TD, wait for QHD to inactive before removal
prev->address = qhd->next.address;
// link the removed qhd's next to list head
qhd->next.address = ((uint32_t) head) | (EHCI_QTYPE_QHD << 1);
if (qhd_is_periodic(qhd)) {
// period list queue element is guarantee to be free in the next frame (1 ms)
qhd->used = 0;
} else {
// async list use async advance handshake. Mark as removing, will completely re-usable when async advance isr occurs
qhd->removing = 1;
}
hcd_dcache_clean(qhd, sizeof(ehci_qhd_t));
hcd_dcache_clean(prev, sizeof(ehci_qhd_t));
}
// Remove queue head belong to this device address
static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr) {
ehci_link_t *prev = list_head;
while (prev && !prev->terminate) {
ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev);
ehci_qhd_t *qhd = (ehci_qhd_t *) (uintptr_t) list_next(prev);
// done if loop back to head
if ( (uintptr_t) qhd == (uintptr_t) list_head) {
if ((uintptr_t) qhd == (uintptr_t) list_head) {
break;
}
if ( qhd->dev_addr == dev_addr ) {
// TODO deactivate all TD, wait for QHD to inactive before removal
prev->address = qhd->next.address;
// EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller)
qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1);
if ( qhd->int_smask )
{
// period list queue element is guarantee to be free in the next frame (1 ms)
qhd->used = 0;
}else
{
// async list use async advance handshake
// mark as removing, will completely re-usable when async advance isr occurs
qhd->removing = 1;
}
hcd_dcache_clean(qhd, sizeof(ehci_qhd_t));
hcd_dcache_clean(prev, sizeof(ehci_qhd_t));
}else {
// ep_addr is 0xff means all endpoints of this device address
if (qhd->dev_addr == dev_addr &&
(ep_addr == TUSB_INDEX_INVALID_8 || qhd_ep_addr(qhd) == ep_addr)) {
list_remove(list_head, prev, qhd);
} else {
prev = list_next(prev);
}
}
}
//--------------------------------------------------------------------+
// Queue Header helper
//--------------------------------------------------------------------+
@@ -782,8 +800,10 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) {
// Find a free queue head
TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_find_free(void) {
for ( uint32_t i = 0; i < QHD_MAX; i++ ) {
if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i];
for (uint32_t i = 0; i < QHD_MAX; i++) {
if (!ehci_data.qhd_pool[i].used) {
return &ehci_data.qhd_pool[i];
}
}
return NULL;
}
@@ -800,10 +820,9 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) {
}
ehci_qhd_t *qhd_pool = ehci_data.qhd_pool;
for ( uint32_t i = 0; i < QHD_MAX; i++ ) {
if ( (qhd_pool[i].dev_addr == dev_addr) &&
ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) ) {
for (uint32_t i = 0; i < QHD_MAX; i++) {
if ((qhd_pool[i].dev_addr == dev_addr) &&
ep_addr == qhd_ep_addr(&qhd_pool[i])) {
return &qhd_pool[i];
}
}
@@ -812,8 +831,7 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) {
}
// Init queue head with endpoint descriptor
static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
{
static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
// address 0 is used as async head, which always on the list --> cannot be cleared (ehci halted otherwise)
if (dev_addr != 0) {
tu_memclr(p_qhd, sizeof(ehci_qhd_t));
@@ -830,39 +848,43 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c
p_qhd->ep_number = tu_edpt_number(ep_desc->bEndpointAddress);
p_qhd->ep_speed = devtree_info.speed;
p_qhd->data_toggle_control= (xfer_type == TUSB_XFER_CONTROL) ? 1 : 0;
p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static asyn list head
p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static async list head
p_qhd->max_packet_size = tu_edpt_packet_size(ep_desc);
p_qhd->fl_ctrl_ep_flag = ((xfer_type == TUSB_XFER_CONTROL) && (p_qhd->ep_speed != TUSB_SPEED_HIGH)) ? 1 : 0;
p_qhd->nak_reload = 0;
// Bulk/Control -> smask = cmask = 0
// TODO Isochronous
if (TUSB_XFER_INTERRUPT == xfer_type)
{
if (TUSB_SPEED_HIGH == p_qhd->ep_speed)
{
TU_ASSERT( interval <= 16, );
if ( interval < 4) // sub millisecond interval
{
p_qhd->interval_ms = 0;
p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) :
(interval == 2) ? TU_BIN8(10101010) : TU_BIN8(01000100);
}else
{
p_qhd->interval_ms = (uint8_t) tu_min16( 1 << (interval-4), 255 );
p_qhd->int_smask = TU_BIT(interval % 8);
switch (xfer_type) {
case TUSB_XFER_CONTROL:
case TUSB_XFER_BULK:
p_qhd->int_smask = p_qhd->fl_int_cmask = 0;
break;
case TUSB_XFER_INTERRUPT:
if (TUSB_SPEED_HIGH == p_qhd->ep_speed) {
TU_ASSERT(interval <= 16, );
if (interval < 4) {
// sub millisecond interval
p_qhd->interval_ms = 0;
p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) :
(interval == 2) ? TU_BIN8(10101010): TU_BIN8(01000100);
} else {
p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255);
p_qhd->int_smask = TU_BIT(interval % 8);
}
} else {
TU_ASSERT(0 != interval, );
// Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes
p_qhd->int_smask = 0x01;
p_qhd->fl_int_cmask = TU_BIN8(11100);
p_qhd->interval_ms = interval;
}
}else
{
TU_ASSERT( 0 != interval, );
// Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes
p_qhd->int_smask = 0x01;
p_qhd->fl_int_cmask = TU_BIN8(11100);
p_qhd->interval_ms = interval;
}
}else
{
p_qhd->int_smask = p_qhd->fl_int_cmask = 0;
break;
case TUSB_XFER_ISOCHRONOUS:
// TODO not support ISO yet
break;
default: break;
}
p_qhd->fl_hub_addr = devtree_info.hub_addr;
@@ -880,8 +902,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c
p_qhd->qtd_overlay.next.terminate = 1;
p_qhd->qtd_overlay.alternate.terminate = 1;
if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT)
{
if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT) {
p_qhd->qtd_overlay.ping_err = 1; // do PING for Highspeed Bulk OUT, EHCI section 4.11
}
}

280
src/portable/ehci/ehci.h
View File

@@ -49,15 +49,14 @@
// TODO merge OHCI with EHCI
enum {
EHCI_MAX_ITD = 4,
EHCI_MAX_ITD = 4,
EHCI_MAX_SITD = 16
};
//--------------------------------------------------------------------+
// EHCI Data Structure
//--------------------------------------------------------------------+
enum
{
enum {
EHCI_QTYPE_ITD = 0 ,
EHCI_QTYPE_QHD ,
EHCI_QTYPE_SITD ,
@@ -65,8 +64,7 @@ enum
};
/// EHCI PID
enum
{
enum {
EHCI_PID_OUT = 0 ,
EHCI_PID_IN ,
EHCI_PID_SETUP
@@ -74,187 +72,182 @@ enum
/// Link pointer
typedef union {
uint32_t address;
struct {
uint32_t terminate : 1;
uint32_t type : 2;
};
}ehci_link_t;
uint32_t address;
struct {
uint32_t terminate : 1;
uint32_t type : 2;
};
} ehci_link_t;
TU_VERIFY_STATIC( sizeof(ehci_link_t) == 4, "size is not correct" );
/// Queue Element Transfer Descriptor
/// Qtd is used to declare overlay in ehci_qhd_t -> cannot be declared with TU_ATTR_ALIGNED(32)
typedef struct
{
// Word 0: Next QTD Pointer
ehci_link_t next;
typedef struct {
// Word 0 Next QTD Pointer
ehci_link_t next;
// Word 1: Alternate Next QTD Pointer (not used)
union{
ehci_link_t alternate;
struct {
uint32_t : 5;
uint32_t used : 1;
uint32_t : 10;
uint32_t expected_bytes : 16;
};
};
// Word 1 Alternate Next QTD Pointer (not used)
union {
ehci_link_t alternate;
struct {
uint32_t : 5;
uint32_t used : 1;
uint32_t : 10;
uint32_t expected_bytes : 16;
};
};
// Word 2: qTQ Token
volatile uint32_t ping_err : 1 ; ///< For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator
volatile uint32_t non_hs_split_state : 1 ; ///< Used by HC to track the state of split transaction
volatile uint32_t non_hs_missed_uframe : 1 ; ///< HC misses a complete split transaction
volatile uint32_t xact_err : 1 ; ///< Error (Timeout, CRC, Bad PID ... )
volatile uint32_t babble_err : 1 ; ///< Babble detected, also set Halted bit to 1
volatile uint32_t buffer_err : 1 ; ///< Data overrun/underrun error
volatile uint32_t halted : 1 ; ///< Serious error or STALL received
volatile uint32_t active : 1 ; ///< Start transfer, clear by HC when complete
// Word 2 qTQ Token
volatile uint32_t ping_err : 1; // For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator
volatile uint32_t non_hs_split_state : 1; // Used by HC to track the state of split transaction
volatile uint32_t non_hs_missed_uframe : 1; // HC misses a complete split transaction
volatile uint32_t xact_err : 1; // Error (Timeout, CRC, Bad PID ... )
volatile uint32_t babble_err : 1; // Babble detected, also set Halted bit to 1
volatile uint32_t buffer_err : 1; // Data overrun/underrun error
volatile uint32_t halted : 1; // Serious error or STALL received
volatile uint32_t active : 1; // Start transfer, clear by HC when complete
uint32_t pid : 2 ; ///< 0: OUT, 1: IN, 2 Setup
volatile uint32_t err_count : 2 ; ///< Error Counter of consecutive errors
volatile uint32_t current_page : 3 ; ///< Index into the qTD buffer pointer list
uint32_t int_on_complete : 1 ; ///< Interrupt on complete
volatile uint32_t total_bytes : 15 ; ///< Transfer bytes, decreased during transaction
volatile uint32_t data_toggle : 1 ; ///< Data Toggle bit
uint32_t pid : 2; // 0: OUT, 1: IN, 2 Setup
volatile uint32_t err_count : 2; // Error Counter of consecutive errors
volatile uint32_t current_page : 3; // Index into the qTD buffer pointer list
uint32_t int_on_complete : 1; // Interrupt on complete
volatile uint32_t total_bytes : 15; // Transfer bytes, decreased during transaction
volatile uint32_t data_toggle : 1; // Data Toggle bit
/// Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page
uint32_t buffer[5];
// Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address.
// The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page
uint32_t buffer[5];
} ehci_qtd_t;
TU_VERIFY_STATIC( sizeof(ehci_qtd_t) == 32, "size is not correct" );
/// Queue Head
typedef struct TU_ATTR_ALIGNED(32)
{
// Word 0: Next QHD
ehci_link_t next;
typedef struct TU_ATTR_ALIGNED(32) {
// Word 0 Next QHD
ehci_link_t next;
// Word 1: Endpoint Characteristics
uint32_t dev_addr : 7 ; ///< device address
uint32_t fl_inactive_next_xact : 1 ; ///< Only valid for Periodic with Full/Slow speed
uint32_t ep_number : 4 ; ///< EP number
uint32_t ep_speed : 2 ; ///< 0: Full, 1: Low, 2: High
uint32_t data_toggle_control : 1 ; ///< 0: use DT in qHD, 1: use DT in qTD
uint32_t head_list_flag : 1 ; ///< Head of the queue
uint32_t max_packet_size : 11 ; ///< Max packet size
uint32_t fl_ctrl_ep_flag : 1 ; ///< 1 if is Full/Low speed control endpoint
uint32_t nak_reload : 4 ; ///< Used by HC
// Word 1 Endpoint Characteristics
uint32_t dev_addr : 7; // device address
uint32_t fl_inactive_next_xact : 1; // Only valid for Periodic with Full/Slow speed
uint32_t ep_number : 4; // EP number
uint32_t ep_speed : 2; // Full (0), Low (1), High (2)
uint32_t data_toggle_control : 1; // 0 use DT in qHD, 1 use DT in qTD
uint32_t head_list_flag : 1; // Head of the queue
uint32_t max_packet_size : 11; // Max packet size
uint32_t fl_ctrl_ep_flag : 1; // 1 if is Full/Low speed control endpoint
uint32_t nak_reload : 4; // Used by HC
// Word 2: Endpoint Capabilities
uint32_t int_smask : 8 ; ///< Interrupt Schedule Mask
uint32_t fl_int_cmask : 8 ; ///< Split Completion Mask for Full/Slow speed
uint32_t fl_hub_addr : 7 ; ///< Hub Address for Full/Slow speed
uint32_t fl_hub_port : 7 ; ///< Hub Port for Full/Slow speed
uint32_t mult : 2 ; ///< Transaction per micro frame
// Word 2 Endpoint Capabilities
uint32_t int_smask : 8; // Interrupt Schedule Mask
uint32_t fl_int_cmask : 8; // Split Completion Mask for Full/Slow speed
uint32_t fl_hub_addr : 7; // Hub Address for Full/Slow speed
uint32_t fl_hub_port : 7; // Hub Port for Full/Slow speed
uint32_t mult : 2; // Transaction per micro frame
// Word 3: Current qTD Pointer
volatile uint32_t qtd_addr;
// Word 3 Current qTD Pointer
volatile uint32_t qtd_addr;
// Word 4-11: Transfer Overlay
volatile ehci_qtd_t qtd_overlay;
// Word 4-11 Transfer Overlay
volatile ehci_qtd_t qtd_overlay;
//--------------------------------------------------------------------+
/// Due to the fact QHD is 32 bytes aligned but occupies only 48 bytes
/// thus there are 16 bytes padding free that we can make use of.
//--------------------------------------------------------------------+
uint8_t used;
uint8_t removing; // removed from asyn list, waiting for async advance
uint8_t pid;
uint8_t interval_ms; // polling interval in frames (or millisecond)
/// Due to the fact QHD is 32 bytes aligned but occupies only 48 bytes
/// thus there are 16 bytes padding free that we can make use of.
//--------------------------------------------------------------------+
uint8_t used;
uint8_t removing;// removed from asyn list, waiting for async advance
uint8_t pid;
uint8_t interval_ms;// polling interval in frames (or millisecond)
uint8_t TU_RESERVED[4];
uint8_t TU_RESERVED[4];
// Attached TD management, note usbh will only queue 1 TD per QHD.
// buffer for dcache invalidate since td's buffer is modified by HC and finding initial buffer address is not trivial
uint32_t attached_buffer;
ehci_qtd_t * volatile attached_qtd;
ehci_qtd_t *volatile attached_qtd;
} ehci_qhd_t;
TU_VERIFY_STATIC( sizeof(ehci_qhd_t) == 64, "size is not correct" );
/// Highspeed Isochronous Transfer Descriptor (section 3.3)
typedef struct TU_ATTR_ALIGNED(32) {
// Word 0: Next Link Pointer
ehci_link_t next;
// Word 0: Next Link Pointer
ehci_link_t next;
// Word 1-8: iTD Transaction Status and Control List
struct {
// iTD Control
volatile uint32_t offset : 12 ; ///< This field is a value that is an offset, expressed in bytes, from the beginning of a buffer.
volatile uint32_t page_select : 3 ; ///< These bits are set by software to indicate which of the buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6
uint32_t int_on_complete : 1 ; ///< If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold
volatile uint32_t length : 12 ; ///< For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer
///< For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count
// iTD Status
volatile uint32_t error : 1 ; ///< Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions.
volatile uint32_t babble_err : 1 ; ///< Set to a 1 by the Host Controller during status update when a babble is detected during the transaction
volatile uint32_t buffer_err : 1 ; ///< Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun).
volatile uint32_t active : 1 ; ///< Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller
} xact[8];
// Word 1-8: iTD Transaction Status and Control List
struct {
// iTD Control
volatile uint32_t offset : 12; // offset in bytes, from the beginning of a buffer.
volatile uint32_t page_select : 3; // buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6
uint32_t int_on_complete : 1; // If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold
volatile uint32_t length : 12; // For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer
// For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count
// iTD Status
volatile uint32_t error : 1; // Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions.
volatile uint32_t babble_err : 1; // Set to a 1 by the Host Controller during status update when a babble is detected during the transaction
volatile uint32_t buffer_err : 1; // Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun).
volatile uint32_t active : 1; // Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller
} xact[8];
// Word 9-15 Buffer Page Pointer List (Plus)
uint32_t BufferPointer[7];
// Word 9-15 Buffer Page Pointer List (Plus)
uint32_t BufferPointer[7];
// // FIXME: Store meta data into buffer pointer reserved for saving memory
// /*---------- HCD Area ----------*/
// uint32_t used;
// uint32_t IhdIdx;
// uint32_t reserved[6];
// FIXME: Store meta data into buffer pointer reserved for saving memory
//---------- HCD Area ----------
// uint32_t used;
// uint32_t IhdIdx;
// uint32_t reserved[6];
} ehci_itd_t;
TU_VERIFY_STATIC( sizeof(ehci_itd_t) == 64, "size is not correct" );
/// Split (Full-Speed) Isochronous Transfer Descriptor
typedef struct TU_ATTR_ALIGNED(32)
{
typedef struct TU_ATTR_ALIGNED(32) {
// Word 0: Next Link Pointer
ehci_link_t next;
ehci_link_t next;
// Word 1: siTD Endpoint Characteristics
uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink.
uint32_t : 1; ///< reserved
uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink.
uint32_t : 4; ///< This field is reserved and should be set to zero.
uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub.
uint32_t : 1; ///< reserved
uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator.
uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT.
// Word 1: siTD Endpoint Characteristics
uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink.
uint32_t : 1; ///< reserved
uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink.
uint32_t : 4; ///< This field is reserved and should be set to zero.
uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub.
uint32_t : 1; ///< reserved
uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator.
uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT.
// Word 2: Micro-frame Schedule Control
uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions
uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions.
uint16_t reserved ; ///< reserved
// Word 2: Micro-frame Schedule Control
uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions
uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions.
uint16_t reserved ; ///< reserved
// Word 3: siTD Transfer Status and Control
// Status [7:0] TODO identical to qTD Token'status --> refactor later
volatile uint32_t : 1 ; // reserved
volatile uint32_t split_state : 1 ;
volatile uint32_t missed_uframe : 1 ;
volatile uint32_t xact_err : 1 ;
volatile uint32_t babble_err : 1 ;
volatile uint32_t buffer_err : 1 ;
volatile uint32_t error : 1 ;
volatile uint32_t active : 1 ;
// Micro-frame Schedule Control
volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements.
volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023
volatile uint32_t : 4 ; ///< reserved
volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer
uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete
uint32_t : 0 ; // padding to the end of current storage unit
// Word 3: siTD Transfer Status and Control
// Status [7:0] TODO identical to qTD Token'status --> refactor later
volatile uint32_t : 1 ; // reserved
volatile uint32_t split_state : 1 ;
volatile uint32_t missed_uframe : 1 ;
volatile uint32_t xact_err : 1 ;
volatile uint32_t babble_err : 1 ;
volatile uint32_t buffer_err : 1 ;
volatile uint32_t error : 1 ;
volatile uint32_t active : 1 ;
// Micro-frame Schedule Control
volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements.
volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023
volatile uint32_t : 4 ; ///< reserved
volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer
uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete
uint32_t : 0 ; // padding to the end of current storage unit
/// Word 4-5: Buffer Pointer List
uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count
/// Word 4-5: Buffer Pointer List
uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count
/*---------- Word 6 ----------*/
ehci_link_t back;
/*---------- Word 6 ----------*/
ehci_link_t back;
/// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data
uint8_t used;
uint8_t ihd_idx;
uint8_t reserved2[2];
/// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data
uint8_t used;
uint8_t ihd_idx;
uint8_t reserved2[2];
} ehci_sitd_t;
TU_VERIFY_STATIC( sizeof(ehci_sitd_t) == 32, "size is not correct" );
@@ -315,8 +308,7 @@ enum {
EHCI_PORTSC_MASK_OVER_CURRENT_CHANGE
};
typedef volatile struct
{
typedef volatile struct {
union {
uint32_t command; // 0x00

5
src/portable/mentor/musb/hcd_musb.c
View File

@@ -804,6 +804,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen)
{
(void)rhport;

5
src/portable/nxp/khci/hcd_khci.c
View File

@@ -541,6 +541,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
/* The address of buffer must be aligned to 4 byte boundary. And it must be at least 4 bytes long.
* DMA writes data in 4 byte unit */
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)

6
src/portable/ohci/ohci.c
View File

@@ -451,7 +451,6 @@ static void td_insert_to_ed(ohci_ed_t* p_ed, ohci_gtd_t * p_gtd)
//--------------------------------------------------------------------+
// Endpoint API
//--------------------------------------------------------------------+
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
{
(void) rhport;
@@ -486,6 +485,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8])
{
(void) rhport;

5
src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
View File

@@ -122,6 +122,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre);
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
uint8_t const pio_rhport = RHPORT_PIO(rhport);
return pio_usb_host_endpoint_close(pio_rhport, daddr, ep_addr);
}
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) {
uint8_t const pio_rhport = RHPORT_PIO(rhport);
return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen);

6
src/portable/raspberrypi/rp2040/hcd_rp2040.c
View File

@@ -514,7 +514,6 @@ void hcd_int_disable(uint8_t rhport)
//--------------------------------------------------------------------+
// Endpoint API
//--------------------------------------------------------------------+
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
{
(void) rhport;
@@ -535,6 +534,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)
{
(void) rhport;

5
src/portable/renesas/rusb2/hcd_rusb2.c
View File

@@ -718,6 +718,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen)
{
bool r;

6
src/portable/synopsys/dwc2/hcd_dwc2.c
View File

@@ -506,6 +506,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t*
return true;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
// clean up channel after part of transfer is done but the whole urb is not complete
static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) {
hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id];
@@ -1177,6 +1182,7 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) {
static bool handle_sof_irq(uint8_t rhport, bool in_isr) {
(void) in_isr;
dwc2_regs_t* dwc2 = DWC2_REG(rhport);
dwc2->gintsts = GINTSTS_SOF; // Clear the SOF interrupt flag
bool more_isr = false;

49
src/portable/template/hcd_template.c
View File

@@ -36,24 +36,19 @@
// optional hcd configuration, called by tuh_configure()
bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
(void) rhport;
(void) cfg_id;
(void) cfg_param;
(void) rhport; (void) cfg_id; (void) cfg_param;
return false;
}
// Initialize controller to host mode
bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) {
(void) rhport;
(void) rh_init;
(void) rhport; (void) rh_init;
return false;
}
// Interrupt Handler
void hcd_int_handler(uint8_t rhport, bool in_isr) {
(void) rhport;
(void) in_isr;
(void) rhport; (void) in_isr;
}
// Enable USB interrupt
@@ -69,7 +64,6 @@ void hcd_int_disable(uint8_t rhport) {
// Get frame number (1ms)
uint32_t hcd_frame_number(uint8_t rhport) {
(void) rhport;
return 0;
}
@@ -80,7 +74,6 @@ uint32_t hcd_frame_number(uint8_t rhport) {
// Get the current connect status of roothub port
bool hcd_port_connect_status(uint8_t rhport) {
(void) rhport;
return false;
}
@@ -98,14 +91,12 @@ void hcd_port_reset_end(uint8_t rhport) {
// Get port link speed
tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
(void) rhport;
return TUSB_SPEED_FULL;
}
// HCD closes all opened endpoints belong to this device
void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
(void) rhport;
(void) dev_addr;
(void) rhport; (void) dev_addr;
}
//--------------------------------------------------------------------+
@@ -114,49 +105,37 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
// Open an endpoint
bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
(void) rhport;
(void) dev_addr;
(void) ep_desc;
(void) rhport; (void) dev_addr; (void) ep_desc;
return false;
}
bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
(void) rhport; (void) daddr; (void) ep_addr;
return false; // TODO not implemented yet
}
// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
(void) rhport;
(void) dev_addr;
(void) ep_addr;
(void) buffer;
(void) buflen;
(void) rhport; (void) dev_addr; (void) ep_addr; (void) buffer; (void) buflen;
return false;
}
// Abort a queued transfer. Note: it can only abort transfer that has not been started
// Return true if a queued transfer is aborted, false if there is no transfer to abort
bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
(void) rhport;
(void) dev_addr;
(void) ep_addr;
(void) rhport; (void) dev_addr; (void) ep_addr;
return false;
}
// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked
bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
(void) rhport;
(void) dev_addr;
(void) setup_packet;
(void) rhport; (void) dev_addr; (void) setup_packet;
return false;
}
// clear stall, data toggle is also reset to DATA0
bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
(void) rhport;
(void) dev_addr;
(void) ep_addr;
(void) rhport; (void) dev_addr; (void) ep_addr;
return false;
}