andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Allow use of internal FS PHY on OTG_HS interface

Browse Source 
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with
either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently
the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY
(`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
This commit is contained in:
Jacob Potter
2020-10-18 16:55:14 -06:00
parent 43cb5fabfd
commit c87ed8eff1
1 changed files with 10 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
src/portable/st/synopsys/dcd_synopsys.c
View File

@@ -416,7 +416,9 @@ void dcd_init (uint8_t rhport)
if ( rhport == 1 )
{
// On selected MCUs HS port1 can be used with external PHY via ULPI interface
#if defined(TUD_OPT_SYNOPSYS_FS_PHY)
usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
#else
// deactivate internal PHY
usb_otg->GCCFG &= ~USB_OTG_GCCFG_PWRDWN;
@@ -425,6 +427,7 @@ void dcd_init (uint8_t rhport)
// Select default internal VBUS Indicator and Drive for ULPI
usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
#endif
#if defined(USB_HS_PHYC)
// Highspeed with embedded UTMI PHYC
@@ -467,8 +470,13 @@ void dcd_init (uint8_t rhport)
set_speed(rhport, TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL);
// Enable internal USB transceiver.
// Enable internal USB transceiver. Unconditional if using FS PHY on HS core.
#if defined(TUD_OPT_SYNOPSYS_FS_PHY)
usb_otg->GCCFG |= USB_OTG_GCCFG_PWRDWN;
#else
if ( rhport == 0 ) usb_otg->GCCFG |= USB_OTG_GCCFG_PWRDWN;
#endif
usb_otg->GINTMSK |= USB_OTG_GINTMSK_USBRST | USB_OTG_GINTMSK_ENUMDNEM |
USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_WUIM |