andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

Reformat net_lwip_webserver example.

Browse Source
This commit is contained in:
HiFiPhile
2024-05-07 00:17:09 +02:00
parent 91d69fa942
commit d25ee82d3f
2 changed files with 78 additions and 85 deletions
Download Patch File Download Diff File Expand all files Collapse all files

50
examples/device/net_lwip_webserver/src/tusb_config.h
View File

@@ -27,21 +27,23 @@
#define _TUSB_CONFIG_H_
#ifdef __cplusplus
extern "C" {
extern "C" {
#endif
#include "lwipopts.h"
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
// RHPort number used for device can be defined by board.mk, default to port 0
#ifndef BOARD_TUD_RHPORT
#define BOARD_TUD_RHPORT 0
#define BOARD_TUD_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUD_MAX_SPEED
#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
@@ -50,22 +52,22 @@
// defined by compiler flags for flexibility
#ifndef CFG_TUSB_MCU
#error CFG_TUSB_MCU must be defined
#error CFG_TUSB_MCU must be defined
#endif
#ifndef CFG_TUSB_OS
#define CFG_TUSB_OS OPT_OS_NONE
#define CFG_TUSB_OS OPT_OS_NONE
#endif
#ifndef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG 0
#define CFG_TUSB_DEBUG 0
#endif
// Enable Device stack
#define CFG_TUD_ENABLED 1
#define CFG_TUD_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED
#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -75,21 +77,33 @@
* - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4)))
*/
#ifndef CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION
#endif
#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUSB_MEM_ALIGN __attribute__((aligned(4)))
#endif
// number of NCM transfer blocks for reception side (only valid if NCM is selected below)
//--------------------------------------------------------------------
// NCM CLASS CONFIGURATION, SEE "ncm.h" FOR PERFORMANCE TUNNING
//--------------------------------------------------------------------
// Must be >> MTU
// Can be set to 2048 without impact
#define CFG_TUD_NCM_IN_NTB_MAX_SIZE (2 * TCP_MSS + 100)
// Must be >> MTU
// Can be set to smaller values if wNtbOutMaxDatagrams==1
#define CFG_TUD_NCM_OUT_NTB_MAX_SIZE (2 * TCP_MSS + 100)
// Number of NCM transfer blocks for reception side
#ifndef CFG_TUD_NCM_OUT_NTB_N
#define CFG_TUD_NCM_OUT_NTB_N 2
#define CFG_TUD_NCM_OUT_NTB_N 1
#endif
// number of NCM transfer blocks for transmission side (only valid if NCM is selected below)
// Number of NCM transfer blocks for transmission side
#ifndef CFG_TUD_NCM_IN_NTB_N
#define CFG_TUD_NCM_IN_NTB_N 3
#define CFG_TUD_NCM_IN_NTB_N 1
#endif
//--------------------------------------------------------------------
@@ -97,18 +111,18 @@
//--------------------------------------------------------------------
#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE 64
#define CFG_TUD_ENDPOINT0_SIZE 64
#endif
//------------- CLASS -------------//
// Network class has 2 drivers: ECM/RNDIS and NCM.
// Only one of the drivers can be enabled
#define CFG_TUD_ECM_RNDIS 1
#define CFG_TUD_NCM (1-CFG_TUD_ECM_RNDIS)
#define CFG_TUD_ECM_RNDIS 1
#define CFG_TUD_NCM (1 - CFG_TUD_ECM_RNDIS)
#ifdef __cplusplus
}
}
#endif
#endif /* _TUSB_CONFIG_H_ */