enable all warnings

src/portable/nxp/lpc11_13_15/dcd_lpc11_13_15.c

@@ -153,7 +153,8 @@ void dcd_int_disable(uint8_t rhport)
 
 void dcd_set_config(uint8_t rhport, uint8_t config_num)
 {
-
+  (void) rhport;
+  (void) config_num;
 }
 
 void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
@@ -186,6 +187,8 @@ bool dcd_init(uint8_t rhport)
 //--------------------------------------------------------------------+
 void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 {
+  (void) rhport;
+
   if ( edpt_number(ep_addr) == 0 )
   {
     // TODO cannot able to STALL Control OUT endpoint !!!!! FIXME try some walk-around
@@ -200,12 +203,16 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 
 bool dcd_edpt_stalled(uint8_t rhport, uint8_t ep_addr)
 {
+  (void) rhport;
+
   uint8_t const ep_id = ep_addr2id(ep_addr);
   return _dcd.ep[ep_id][0].stall;
 }
 
 void dcd_edpt_clear_stall(uint8_t rhport, uint8_t edpt_addr)
 {
+  (void) rhport;
+
   uint8_t const ep_id = ep_addr2id(edpt_addr);
 
   _dcd.ep[ep_id][0].stall        = 0;
@@ -237,6 +244,8 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
 
 bool dcd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
 {
+  (void) rhport;
+
   uint8_t const ep_id = ep_addr2id(ep_addr);
   return _dcd.ep[ep_id][0].active;
 }
@@ -254,6 +263,8 @@ static void prepare_ep_xfer(uint8_t ep_id, uint16_t buf_offset, uint16_t total_b
 
 bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes)
 {
+  (void) rhport;
+
   uint8_t const ep_id = ep_addr2id(ep_addr);
 
   tu_varclr(&_dcd.dma[ep_id]);

src/portable/nxp/lpc18_43/dcd_lpc18_43.c

@@ -99,6 +99,8 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
 
 void dcd_set_config(uint8_t rhport, uint8_t config_num)
 {
+  (void) rhport;
+  (void) config_num;
   // nothing to do
 }
 
@@ -266,7 +268,6 @@ bool dcd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
   uint8_t const dir    = edpt_dir(ep_addr);
   uint8_t const ep_idx = 2*epnum + dir;
 
-  dcd_qhd_t const * p_qhd = &dcd_data_ptr[rhport]->qhd[ep_idx];
   dcd_qtd_t * p_qtd = &dcd_data_ptr[rhport]->qtd[ep_idx];
 
   return p_qtd->active;
@@ -365,7 +366,6 @@ void hal_dcd_isr(uint8_t rhport)
         if ( BIT_TEST_(edpt_complete, ep_idx2bit(ep_idx)) )
         {
           // 23.10.12.3 Failed QTD also get ENDPTCOMPLETE set
-          dcd_qhd_t * p_qhd = &dcd_data_ptr[rhport]->qhd[ep_idx];
           dcd_qtd_t * p_qtd = &dcd_data_ptr[rhport]->qtd[ep_idx];
 
           uint8_t result = p_qtd->halted  ? XFER_RESULT_STALLED :

src/portable/nxp/lpc18_43/hcd_lpc18_43.c

@@ -40,7 +40,7 @@
 
 #if TUSB_OPT_HOST_ENABLED && (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX)
 
-
+#include "chip.h"
 
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION