diff --git a/examples/host/hid_to_cdc/CMakeLists.txt b/examples/host/hid_to_cdc/CMakeLists.txt new file mode 100644 index 000000000..abc4d91da --- /dev/null +++ b/examples/host/hid_to_cdc/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/host/hid_to_cdc/Makefile b/examples/host/hid_to_cdc/Makefile new file mode 100644 index 000000000..b62a383eb --- /dev/null +++ b/examples/host/hid_to_cdc/Makefile @@ -0,0 +1,20 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference + +SRC_C += \ + src/class/hid/hid_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/host/usbh_control.c + +include ../../rules.mk diff --git a/examples/host/hid_to_cdc/only.txt b/examples/host/hid_to_cdc/only.txt new file mode 100644 index 000000000..87bf09f24 --- /dev/null +++ b/examples/host/hid_to_cdc/only.txt @@ -0,0 +1 @@ +board:mimxrt1060_evk diff --git a/examples/host/hid_to_cdc/src/main.c b/examples/host/hid_to_cdc/src/main.c new file mode 100644 index 000000000..e11f34cc2 --- /dev/null +++ b/examples/host/hid_to_cdc/src/main.c @@ -0,0 +1,291 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +// This example runs both host and device concurrently. The USB host looks for +// any HID device with reports that are 8 bytes long and then assumes they are +// keyboard reports. It translates the keypresses of the reports to ASCII and +// transmits it over CDC to the device's host. + +#include +#include +#include + +#include "bsp/board.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +void led_blinking_task(void); +void cdc_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + tusb_init(); + + while (1) + { + tud_task(); // tinyusb device task + tuh_task(); // tinyusb host task + led_blinking_task(); + + cdc_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// Host callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) +{ + (void)desc_report; + (void)desc_len; + uint16_t vid, pid; + tuh_vid_pid_get(dev_addr, &vid, &pid); + + printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); + printf("VID = %04x, PID = %04x\r\n", vid, pid); + + // Receive any report and treat it like a keyboard. + // tuh_hid_report_received_cb() will be invoked when report is available + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) +{ + printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); +} + +const char* numbers = "0123456789"; + +// Uncomment if you use colemak and need to remap keys (like @tannewt.) +// const uint8_t colemak[77] = { +// 0, 0, 0, 0, 0, 0, 0, 22, +// 9, 23, 7, 0, 24, 17, 8, 12, +// 0, 14, 28, 51, 0, 19, 21, 10, +// 15, 0, 0, 0, 13, 0, 0, 0, +// 0, 0, 0, 0, 0, 0, 0, 0, +// 0, 0, 0, 0, 0, 0, 0, 0, +// 0, 0, 0, 18, 0, 0, 0, 0, +// 0, 0, 0, 0, 0, 0, 0, 0, +// 0, 0, 0, 0, 0, 0, 0, 0, +// 0, 0, 0, 0, 0 +// }; + +// This is the reverse mapping of the US key layout in Adafruit_CircuitPython_HID. +const char* ascii = "\0\0\0\0abcdefghijklmnopqrstuvwxyz1234567890\n\x1b\x08\t -=[]\\\x00;\'`,./\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x7f"; +const char* shifted = "\0\0\0\0ABCDEFGHIJKLMNOPQRSTUVWXYZ!@#$%^&*()\0\0\0\0\0_+{}|\0:\"~<>?\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"; +// Bitmask of pressed keys. We use the current modifier state. +uint32_t last_state[8]; + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) +{ + if (len != 8 && len < 10) { + tud_cdc_write("report len: ", 12); + tud_cdc_write(numbers + len, 1); + tud_cdc_write("\r\n", 2); + tud_cdc_write_flush(); + } + if (len != 8) { + // Don't request a new report for a wrong sized endpoint. + return; + } + uint8_t modifiers = report[0]; + bool flush = false; + for (int i = 2; i < 8; i++) { + if (report[i] == 0) { + continue; + } + uint8_t down = report[i]; + uint32_t mask = 1 << (down % 32); + bool was_down = (last_state[down / 32] & mask) != 0; + // Only map keycodes 0 - 76. + if (!was_down && down < 77) { + const char* layer = ascii; + // Check shift bits + if ((modifiers & 0x22) != 0) { + layer = shifted; + } + // Map the key code for Colemak layout so @tannewt can type. + // uint8_t colemak_key_code = colemak[down]; + // if (colemak_key_code != 0) { + // down = colemak_key_code; + // } + char c = layer[down]; + if (c == '\0') { + continue; + } + if (c == '\n') { + tud_cdc_write("\r", 1); + } + tud_cdc_write(&c, 1); + flush = true; + } + } + if (flush) { + tud_cdc_write_flush(); + } + // Now update last_state + memset(last_state, 0, 8 * sizeof(uint32_t)); + for (int i = 2; i < 8; i++) { + if (report[i] == 0) { + continue; + } + uint8_t down = report[i]; + last_state[down / 32] |= 1 << (down % 32); + } + // continue to request to receive report + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request to receive report\r\n"); + } +} + + + +//--------------------------------------------------------------------+ +// USB CDC +//--------------------------------------------------------------------+ +void cdc_task(void) +{ + // connected() check for DTR bit + // Most but not all terminal client set this when making connection + // if ( tud_cdc_connected() ) + { + // connected and there are data available + if ( tud_cdc_available() ) + { + // read datas + char buf[64]; + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + (void) count; + + // Echo back + // Note: Skip echo by commenting out write() and write_flush() + // for throughput test e.g + // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 + tud_cdc_write(buf, count); + tud_cdc_write_flush(); + } + } +} + +// Invoked when cdc when line state changed e.g connected/disconnected +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +{ + (void) itf; + (void) rts; + + // TODO set some indicator + if ( dtr ) + { + // Terminal connected + }else + { + // Terminal disconnected + } +} + +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/host/hid_to_cdc/src/tusb_config.h b/examples/host/hid_to_cdc/src/tusb_config.h new file mode 100644 index 000000000..9a35ffc30 --- /dev/null +++ b/examples/host/hid_to_cdc/src/tusb_config.h @@ -0,0 +1,163 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by board.mk +#ifndef CFG_TUSB_MCU + #error CFG_TUSB_MCU must be defined +#endif + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort number used for device can be defined by board.mk, default to port 1 +#ifndef BOARD_HOST_RHPORT_NUM + #define BOARD_HOST_RHPORT_NUM 1 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ + TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ + TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_HOST_RHPORT_SPEED + #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ + TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ + TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) + #define BOARD_HOST_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_HOST_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_HOST_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) +#elif BOARD_HOST_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +//-------------------------------------------------------------------- +// HOST CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 +#define CFG_TUH_CDC 0 +#define CFG_TUH_MSC 0 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device) +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports + +//------------- HID -------------// +#define CFG_TUH_HID 4 +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/host/hid_to_cdc/src/usb_descriptors.c b/examples/host/hid_to_cdc/src/usb_descriptors.c new file mode 100644 index 000000000..7dd73937c --- /dev/null +++ b/examples/host/hid_to_cdc/src/usb_descriptors.c @@ -0,0 +1,266 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum +{ + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_MSC, + ITF_NUM_TOTAL +}; + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#endif + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) + +// full speed configuration +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// high speed configuration +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), +}; + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + +#endif // highspeed + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + "123456789012", // 3: Serials, should use chip ID + "TinyUSB CDC", // 4: CDC Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = (uint8_t) strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + // Convert ASCII string into UTF-16 + for(uint8_t i=0; iTX = phytx; + + // RT105x RT106x have dual USB controller. +#ifdef USBPHY2 + usb_phy = USBPHY2; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; +#endif } //--------------------------------------------------------------------+ diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index d086d503f..0bf4a0d15 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -15,6 +15,13 @@ CFLAGS += \ -DXIP_BOOT_HEADER_ENABLE=1 \ -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX +ifdef BOARD_DEVICE_RHPORT_NUM +CFLAGS += -DBOARD_DEVICE_RHPORT_NUM=$(BOARD_DEVICE_RHPORT_NUM) +endif +ifdef BOARD_HOST_RHPORT_NUM +CFLAGS += -DBOARD_HOST_RHPORT_NUM=$(BOARD_HOST_RHPORT_NUM) +endif + # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough=