rename lpc43 cmsis folder, preparing to upgrade cmsis from v2.10 to 3.01
This commit is contained in:
hathach
650
demos/bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_ssp.c
Normal file
650
demos/bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_ssp.c
Normal file
@@ -0,0 +1,650 @@
|
||||
/**********************************************************************
|
||||
* $Id$ lpc43xx_ssp.c 2011-06-02
|
||||
*//**
|
||||
* @file lpc43xx_ssp.c
|
||||
* @brief Contains all functions support for SSP firmware library on lpc43xx
|
||||
* @version 1.0
|
||||
* @date 02. June. 2011
|
||||
* @author NXP MCU SW Application Team
|
||||
*
|
||||
* Copyright(C) 2011, NXP Semiconductor
|
||||
* All rights reserved.
|
||||
*
|
||||
***********************************************************************
|
||||
* Software that is described herein is for illustrative purposes only
|
||||
* which provides customers with programming information regarding the
|
||||
* products. This software is supplied "AS IS" without any warranties.
|
||||
* NXP Semiconductors assumes no responsibility or liability for the
|
||||
* use of the software, conveys no license or title under any patent,
|
||||
* copyright, or mask work right to the product. NXP Semiconductors
|
||||
* reserves the right to make changes in the software without
|
||||
* notification. NXP Semiconductors also make no representation or
|
||||
* warranty that such application will be suitable for the specified
|
||||
* use without further testing or modification.
|
||||
* Permission to use, copy, modify, and distribute this software and its
|
||||
* documentation is hereby granted, under NXP Semiconductors<72>
|
||||
* relevant copyright in the software, without fee, provided that it
|
||||
* is used in conjunction with NXP Semiconductors microcontrollers. This
|
||||
* copyright, permission, and disclaimer notice must appear in all copies of
|
||||
* this code.
|
||||
**********************************************************************/
|
||||
|
||||
/* Peripheral group ----------------------------------------------------------- */
|
||||
/** @addtogroup SSP
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------- */
|
||||
#include "lpc43xx_ssp.h"
|
||||
#include "lpc43xx_cgu.h"
|
||||
|
||||
/* If this source file built with example, the lpc43xx FW library configuration
|
||||
* file in each example directory ("lpc43xx_libcfg.h") must be included,
|
||||
* otherwise the default FW library configuration file must be included instead
|
||||
*/
|
||||
#ifdef __BUILD_WITH_EXAMPLE__
|
||||
#include "lpc43xx_libcfg.h"
|
||||
#else
|
||||
#include "lpc43xx_libcfg_default.h"
|
||||
#endif /* __BUILD_WITH_EXAMPLE__ */
|
||||
|
||||
|
||||
#ifdef _SSP
|
||||
|
||||
/* Public Functions ----------------------------------------------------------- */
|
||||
/** @addtogroup SSP_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Public Functions ----------------------------------------------------------- */
|
||||
/** @addtogroup SSP_Public_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/********************************************************************//**
|
||||
* @brief Initializes the SSPx peripheral according to the specified
|
||||
* parameters in the SSP_ConfigStruct.
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] SSP_ConfigStruct Pointer to a SSP_CFG_Type structure that
|
||||
* contains the configuration information for the specified
|
||||
* SSP peripheral.
|
||||
* @return None
|
||||
*********************************************************************/
|
||||
void SSP_Init(LPC_SSPn_Type *SSPx, SSP_CFG_Type *SSP_ConfigStruct)
|
||||
{
|
||||
uint32_t tmp;
|
||||
uint32_t prescale, cr0_div, cmp_clk;
|
||||
uint64_t ssp_clk;
|
||||
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
|
||||
if(SSPx == LPC_SSP0) {
|
||||
/* Set up clock and power for SSP0 module */
|
||||
//LPC_CGU->BASE_SSP0_CLK = (SRC_PL160M_0<<24) | (1<<11);
|
||||
CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_SSP0);
|
||||
} else if(SSPx == LPC_SSP1) {
|
||||
/* Set up clock and power for SSP1 module */
|
||||
//LPC_CGU->BASE_SSP1_CLK = (SRC_PL160M_0<<24) | (1<<11);
|
||||
CGU_EntityConnect(CGU_CLKSRC_PLL1, CGU_BASE_SSP1);
|
||||
} else {
|
||||
return;
|
||||
}
|
||||
|
||||
/* Configure SSP, interrupt is disable, LoopBack mode is disable,
|
||||
* SSP is disable, Slave output is disable as default
|
||||
*/
|
||||
tmp = ((SSP_ConfigStruct->CPHA) | (SSP_ConfigStruct->CPOL) \
|
||||
| (SSP_ConfigStruct->FrameFormat) | (SSP_ConfigStruct->Databit))
|
||||
& SSP_CR0_BITMASK;
|
||||
// write back to SSP control register
|
||||
SSPx->CR0 = tmp;
|
||||
|
||||
tmp = SSP_ConfigStruct->Mode & SSP_CR1_BITMASK;
|
||||
// Write back to CR1
|
||||
SSPx->CR1 = tmp;
|
||||
|
||||
// Set clock rate for SSP peripheral
|
||||
if(SSPx == LPC_SSP0)
|
||||
ssp_clk = CGU_GetPCLKFrequency(CGU_PERIPHERAL_SSP0);
|
||||
else
|
||||
ssp_clk = CGU_GetPCLKFrequency(CGU_PERIPHERAL_SSP1);
|
||||
cr0_div = 0;
|
||||
cmp_clk = 0xFFFFFFFF;
|
||||
prescale = 2;
|
||||
while (cmp_clk > SSP_ConfigStruct->ClockRate)
|
||||
{
|
||||
cmp_clk = ssp_clk / ((cr0_div + 1) * prescale);
|
||||
if (cmp_clk > SSP_ConfigStruct->ClockRate)
|
||||
{
|
||||
cr0_div++;
|
||||
if (cr0_div > 0xFF)
|
||||
{
|
||||
cr0_div = 0;
|
||||
prescale += 2;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Write computed prescaler and divider back to register */
|
||||
SSPx->CR0 &= (~SSP_CR0_SCR(0xFF)) & SSP_CR0_BITMASK;
|
||||
SSPx->CR0 |= (SSP_CR0_SCR(cr0_div)) & SSP_CR0_BITMASK;
|
||||
SSPx->CPSR = prescale & SSP_CPSR_BITMASK;
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief De-initializes the SSPx peripheral registers to their
|
||||
* default reset values.
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_DeInit(LPC_SSPn_Type* SSPx)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
|
||||
/* Disable SSP operation*/
|
||||
SSPx->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
|
||||
}
|
||||
|
||||
/*****************************************************************************//**
|
||||
* @brief Get data size bit selected
|
||||
* @param[in] SSPx pointer to LPC_SSPn_Type structure, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @return Data size, could be:
|
||||
* - SSP_DATABIT_4 :4 bit transfer
|
||||
* - SSP_DATABIT_5 :5 bit transfer
|
||||
* ...
|
||||
* - SSP_DATABIT_16 :16 bit transfer
|
||||
*******************************************************************************/
|
||||
uint8_t SSP_GetDataSize(LPC_SSPn_Type* SSPx)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
return (SSPx->CR0 & (0xF));
|
||||
}
|
||||
|
||||
/*****************************************************************************//**
|
||||
* @brief Fills each SSP_InitStruct member with its default value:
|
||||
* - CPHA = SSP_CPHA_FIRST
|
||||
* - CPOL = SSP_CPOL_HI
|
||||
* - ClockRate = 1000000
|
||||
* - Databit = SSP_DATABIT_8
|
||||
* - Mode = SSP_MASTER_MODE
|
||||
* - FrameFormat = SSP_FRAME_SSP
|
||||
* @param[in] SSP_InitStruct Pointer to a SSP_CFG_Type structure which will be
|
||||
* initialized.
|
||||
* @return None
|
||||
*******************************************************************************/
|
||||
void SSP_ConfigStructInit(SSP_CFG_Type *SSP_InitStruct)
|
||||
{
|
||||
SSP_InitStruct->CPHA = SSP_CPHA_FIRST;
|
||||
SSP_InitStruct->CPOL = SSP_CPOL_HI;
|
||||
SSP_InitStruct->ClockRate = 100000;
|
||||
SSP_InitStruct->Databit = SSP_DATABIT_8;
|
||||
SSP_InitStruct->Mode = SSP_MASTER_MODE;
|
||||
SSP_InitStruct->FrameFormat = SSP_FRAME_SPI;
|
||||
}
|
||||
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Enable or disable SSP peripheral's operation
|
||||
* @param[in] SSPx SSP peripheral, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] NewState New State of SSPx peripheral's operation, should be:
|
||||
* - ENABLE
|
||||
* - DISABLE
|
||||
* @return none
|
||||
**********************************************************************/
|
||||
void SSP_Cmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
||||
|
||||
if (NewState == ENABLE)
|
||||
{
|
||||
SSPx->CR1 |= SSP_CR1_SSP_EN;
|
||||
}
|
||||
else
|
||||
{
|
||||
SSPx->CR1 &= (~SSP_CR1_SSP_EN) & SSP_CR1_BITMASK;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Enable or disable Loop Back mode function in SSP peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] NewState New State of Loop Back mode, should be:
|
||||
* - ENABLE
|
||||
* - DISABLE
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_LoopBackCmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
||||
|
||||
if (NewState == ENABLE)
|
||||
{
|
||||
SSPx->CR1 |= SSP_CR1_LBM_EN;
|
||||
}
|
||||
else
|
||||
{
|
||||
SSPx->CR1 &= (~SSP_CR1_LBM_EN) & SSP_CR1_BITMASK;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Enable or disable Slave Output function in SSP peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] NewState New State of Slave Output function, should be:
|
||||
* - ENABLE :Slave Output in normal operation
|
||||
* - DISABLE :Slave Output is disabled. This blocks
|
||||
* SSP controller from driving the transmit data line (MISO)
|
||||
* Note: This function is available when SSP peripheral in Slave mode
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_SlaveOutputCmd(LPC_SSPn_Type* SSPx, FunctionalState NewState)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
||||
|
||||
if (NewState == ENABLE)
|
||||
{
|
||||
SSPx->CR1 &= (~SSP_CR1_SO_DISABLE) & SSP_CR1_BITMASK;
|
||||
}
|
||||
else
|
||||
{
|
||||
SSPx->CR1 |= SSP_CR1_SO_DISABLE;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Transmit a single data through SSPx peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] Data Data to transmit (must be 16 or 8-bit long, this
|
||||
* depend on SSP data bit number configured)
|
||||
* @return none
|
||||
**********************************************************************/
|
||||
void SSP_SendData(LPC_SSPn_Type* SSPx, uint16_t Data)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
|
||||
SSPx->DR = SSP_DR_BITMASK(Data);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Receive a single data from SSPx peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @return Data received (16-bit long)
|
||||
**********************************************************************/
|
||||
uint16_t SSP_ReceiveData(LPC_SSPn_Type* SSPx)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
|
||||
return ((uint16_t) (SSP_DR_BITMASK(SSPx->DR)));
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief SSP Read write data function
|
||||
* @param[in] SSPx Pointer to SSP peripheral, should be
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] dataCfg Pointer to a SSP_DATA_SETUP_Type structure that
|
||||
* contains specified information about transmit data
|
||||
* configuration.
|
||||
* @param[in] xfType Transfer type, should be:
|
||||
* - SSP_TRANSFER_POLLING :Polling mode
|
||||
* - SSP_TRANSFER_INTERRUPT :Interrupt mode
|
||||
* @return Actual Data length has been transferred in polling mode.
|
||||
* In interrupt mode, always return (0)
|
||||
* Return (-1) if error.
|
||||
* Note: This function can be used in both master and slave mode.
|
||||
***********************************************************************/
|
||||
int32_t SSP_ReadWrite (LPC_SSPn_Type *SSPx, SSP_DATA_SETUP_Type *dataCfg, \
|
||||
SSP_TRANSFER_Type xfType)
|
||||
{
|
||||
uint8_t *rdata8;
|
||||
uint8_t *wdata8;
|
||||
uint16_t *rdata16;
|
||||
uint16_t *wdata16;
|
||||
uint32_t stat;
|
||||
uint32_t tmp;
|
||||
int32_t dataword;
|
||||
|
||||
dataCfg->rx_cnt = 0;
|
||||
dataCfg->tx_cnt = 0;
|
||||
dataCfg->status = 0;
|
||||
|
||||
|
||||
/* Clear all remaining data in RX FIFO */
|
||||
while (SSPx->SR & SSP_SR_RNE){
|
||||
tmp = (uint32_t) SSP_ReceiveData(SSPx);
|
||||
}
|
||||
|
||||
// Clear status
|
||||
SSPx->ICR = SSP_ICR_BITMASK;
|
||||
if(SSP_GetDataSize(SSPx)>8)
|
||||
dataword = 1;
|
||||
else dataword = 0;
|
||||
|
||||
// Polling mode ----------------------------------------------------------------------
|
||||
if (xfType == SSP_TRANSFER_POLLING){
|
||||
if (dataword == 0){
|
||||
rdata8 = (uint8_t *)dataCfg->rx_data;
|
||||
wdata8 = (uint8_t *)dataCfg->tx_data;
|
||||
} else {
|
||||
rdata16 = (uint16_t *)dataCfg->rx_data;
|
||||
wdata16 = (uint16_t *)dataCfg->tx_data;
|
||||
}
|
||||
while ((dataCfg->tx_cnt != dataCfg->length) || (dataCfg->rx_cnt != dataCfg->length)){
|
||||
if ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt != dataCfg->length)){
|
||||
// Write data to buffer
|
||||
if(dataCfg->tx_data == NULL){
|
||||
if (dataword == 0){
|
||||
SSP_SendData(SSPx, 0xFF);
|
||||
dataCfg->tx_cnt++;
|
||||
} else {
|
||||
SSP_SendData(SSPx, 0xFFFF);
|
||||
dataCfg->tx_cnt += 2;
|
||||
}
|
||||
} else {
|
||||
if (dataword == 0){
|
||||
SSP_SendData(SSPx, *wdata8);
|
||||
wdata8++;
|
||||
dataCfg->tx_cnt++;
|
||||
} else {
|
||||
SSP_SendData(SSPx, *wdata16);
|
||||
wdata16++;
|
||||
dataCfg->tx_cnt += 2;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Check overrun error
|
||||
if ((stat = SSPx->RIS) & SSP_RIS_ROR){
|
||||
// save status and return
|
||||
dataCfg->status = stat | SSP_STAT_ERROR;
|
||||
return (-1);
|
||||
}
|
||||
|
||||
// Check for any data available in RX FIFO
|
||||
while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt != dataCfg->length)){
|
||||
// Read data from SSP data
|
||||
tmp = SSP_ReceiveData(SSPx);
|
||||
|
||||
// Store data to destination
|
||||
if (dataCfg->rx_data != NULL)
|
||||
{
|
||||
if (dataword == 0){
|
||||
*(rdata8) = (uint8_t) tmp;
|
||||
rdata8++;
|
||||
} else {
|
||||
*(rdata16) = (uint16_t) tmp;
|
||||
rdata16++;
|
||||
}
|
||||
}
|
||||
// Increase counter
|
||||
if (dataword == 0){
|
||||
dataCfg->rx_cnt++;
|
||||
} else {
|
||||
dataCfg->rx_cnt += 2;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// save status
|
||||
dataCfg->status = SSP_STAT_DONE;
|
||||
|
||||
if (dataCfg->tx_data != NULL){
|
||||
return dataCfg->tx_cnt;
|
||||
} else if (dataCfg->rx_data != NULL){
|
||||
return dataCfg->rx_cnt;
|
||||
} else {
|
||||
return (0);
|
||||
}
|
||||
}
|
||||
|
||||
// Interrupt mode ----------------------------------------------------------------------
|
||||
else if (xfType == SSP_TRANSFER_INTERRUPT){
|
||||
|
||||
while ((SSPx->SR & SSP_SR_TNF) && (dataCfg->tx_cnt != dataCfg->length)){
|
||||
// Write data to buffer
|
||||
if(dataCfg->tx_data == NULL){
|
||||
if (dataword == 0){
|
||||
SSP_SendData(SSPx, 0xFF);
|
||||
dataCfg->tx_cnt++;
|
||||
} else {
|
||||
SSP_SendData(SSPx, 0xFFFF);
|
||||
dataCfg->tx_cnt += 2;
|
||||
}
|
||||
} else {
|
||||
if (dataword == 0){
|
||||
SSP_SendData(SSPx, (*(uint8_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
|
||||
dataCfg->tx_cnt++;
|
||||
} else {
|
||||
SSP_SendData(SSPx, (*(uint16_t *)((uint32_t)dataCfg->tx_data + dataCfg->tx_cnt)));
|
||||
dataCfg->tx_cnt += 2;
|
||||
}
|
||||
}
|
||||
|
||||
// Check error
|
||||
if ((stat = SSPx->RIS) & SSP_RIS_ROR){
|
||||
// save status and return
|
||||
dataCfg->status = stat | SSP_STAT_ERROR;
|
||||
return (-1);
|
||||
}
|
||||
|
||||
// Check for any data available in RX FIFO
|
||||
while ((SSPx->SR & SSP_SR_RNE) && (dataCfg->rx_cnt != dataCfg->length)){
|
||||
// Read data from SSP data
|
||||
tmp = SSP_ReceiveData(SSPx);
|
||||
|
||||
// Store data to destination
|
||||
if (dataCfg->rx_data != NULL)
|
||||
{
|
||||
if (dataword == 0){
|
||||
*(uint8_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint8_t) tmp;
|
||||
} else {
|
||||
*(uint16_t *)((uint32_t)dataCfg->rx_data + dataCfg->rx_cnt) = (uint16_t) tmp;
|
||||
}
|
||||
}
|
||||
// Increase counter
|
||||
if (dataword == 0){
|
||||
dataCfg->rx_cnt++;
|
||||
} else {
|
||||
dataCfg->rx_cnt += 2;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// If there more data to sent or receive
|
||||
if ((dataCfg->rx_cnt != dataCfg->length) || (dataCfg->tx_cnt != dataCfg->length)){
|
||||
// Enable all interrupt
|
||||
SSPx->IMSC = SSP_IMSC_BITMASK;
|
||||
} else {
|
||||
// Save status
|
||||
dataCfg->status = SSP_STAT_DONE;
|
||||
}
|
||||
return (0);
|
||||
}
|
||||
|
||||
return (-1);
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Checks whether the specified SSP status flag is set or not
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] FlagType Type of flag to check status, should be:
|
||||
* - SSP_STAT_TXFIFO_EMPTY :TX FIFO is empty
|
||||
* - SSP_STAT_TXFIFO_NOTFULL :TX FIFO is not full
|
||||
* - SSP_STAT_RXFIFO_NOTEMPTY :RX FIFO is not empty
|
||||
* - SSP_STAT_RXFIFO_FULL :RX FIFO is full
|
||||
* - SSP_STAT_BUSY :SSP peripheral is busy
|
||||
* @return New State of specified SSP status flag
|
||||
**********************************************************************/
|
||||
FlagStatus SSP_GetStatus(LPC_SSPn_Type* SSPx, uint32_t FlagType)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_STAT(FlagType));
|
||||
|
||||
return ((SSPx->SR & FlagType) ? SET : RESET);
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Enable or disable specified interrupt type in SSP peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] IntType Interrupt type in SSP peripheral, should be:
|
||||
* - SSP_INTCFG_ROR :Receive Overrun interrupt
|
||||
* - SSP_INTCFG_RT :Receive Time out interrupt
|
||||
* - SSP_INTCFG_RX :RX FIFO is at least half full interrupt
|
||||
* - SSP_INTCFG_TX :TX FIFO is at least half empty interrupt
|
||||
* @param[in] NewState New State of specified interrupt type, should be:
|
||||
* - ENABLE :Enable this interrupt type
|
||||
* - DISABLE :Disable this interrupt type
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_IntConfig(LPC_SSPn_Type *SSPx, uint32_t IntType, FunctionalState NewState)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_INTCFG(IntType));
|
||||
|
||||
if (NewState == ENABLE)
|
||||
{
|
||||
SSPx->IMSC |= IntType;
|
||||
}
|
||||
else
|
||||
{
|
||||
SSPx->IMSC &= (~IntType) & SSP_IMSC_BITMASK;
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Check whether the specified Raw interrupt status flag is
|
||||
* set or not
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] RawIntType Raw Interrupt Type, should be:
|
||||
* - SSP_INTSTAT_RAW_ROR :Receive Overrun interrupt
|
||||
* - SSP_INTSTAT_RAW_RT :Receive Time out interrupt
|
||||
* - SSP_INTSTAT_RAW_RX :RX FIFO is at least half full interrupt
|
||||
* - SSP_INTSTAT_RAW_TX :TX FIFO is at least half empty interrupt
|
||||
* @return New State of specified Raw interrupt status flag in SSP peripheral
|
||||
* Note: Enabling/Disabling specified interrupt in SSP peripheral does not
|
||||
* effect to Raw Interrupt Status flag.
|
||||
**********************************************************************/
|
||||
IntStatus SSP_GetRawIntStatus(LPC_SSPn_Type *SSPx, uint32_t RawIntType)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_INTSTAT_RAW(RawIntType));
|
||||
|
||||
return ((SSPx->RIS & RawIntType) ? SET : RESET);
|
||||
}
|
||||
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Check whether the specified interrupt status flag is
|
||||
* set or not
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] IntType Raw Interrupt Type, should be:
|
||||
* - SSP_INTSTAT_ROR :Receive Overrun interrupt
|
||||
* - SSP_INTSTAT_RT :Receive Time out interrupt
|
||||
* - SSP_INTSTAT_RX :RX FIFO is at least half full interrupt
|
||||
* - SSP_INTSTAT_TX :TX FIFO is at least half empty interrupt
|
||||
* @return New State of specified interrupt status flag in SSP peripheral
|
||||
* Note: Enabling/Disabling specified interrupt in SSP peripheral effects
|
||||
* to Interrupt Status flag.
|
||||
**********************************************************************/
|
||||
IntStatus SSP_GetIntStatus (LPC_SSPn_Type *SSPx, uint32_t IntType)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_INTSTAT(IntType));
|
||||
|
||||
return ((SSPx->MIS & IntType) ? SET :RESET);
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Clear specified interrupt pending in SSP peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] IntType Interrupt pending to clear, should be:
|
||||
* - SSP_INTCLR_ROR :clears the "frame was received when
|
||||
* RxFIFO was full" interrupt.
|
||||
* - SSP_INTCLR_RT :clears the "Rx FIFO was not empty and
|
||||
* has not been read for a timeout period" interrupt.
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_ClearIntPending(LPC_SSPn_Type *SSPx, uint32_t IntType)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_INTCLR(IntType));
|
||||
|
||||
SSPx->ICR = IntType;
|
||||
}
|
||||
|
||||
/*********************************************************************//**
|
||||
* @brief Enable/Disable DMA function for SSP peripheral
|
||||
* @param[in] SSPx SSP peripheral selected, should be:
|
||||
* - LPC_SSP0 :SSP0 peripheral
|
||||
* - LPC_SSP1 :SSP1 peripheral
|
||||
* @param[in] DMAMode Type of DMA, should be:
|
||||
* - SSP_DMA_TX :DMA for the transmit FIFO
|
||||
* - SSP_DMA_RX :DMA for the Receive FIFO
|
||||
* @param[in] NewState New State of DMA function on SSP peripheral,
|
||||
* should be:
|
||||
* - ENALBE :Enable this function
|
||||
* - DISABLE :Disable this function
|
||||
* @return None
|
||||
**********************************************************************/
|
||||
void SSP_DMACmd(LPC_SSPn_Type *SSPx, uint32_t DMAMode, FunctionalState NewState)
|
||||
{
|
||||
CHECK_PARAM(PARAM_SSPx(SSPx));
|
||||
CHECK_PARAM(PARAM_SSP_DMA(DMAMode));
|
||||
CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
|
||||
|
||||
if (NewState == ENABLE)
|
||||
{
|
||||
SSPx->DMACR |= DMAMode;
|
||||
}
|
||||
else
|
||||
{
|
||||
SSPx->DMACR &= (~DMAMode) & SSP_DMA_BITMASK;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* _SSP */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* --------------------------------- End Of File ------------------------------ */
|
||||
Reference in New Issue
Block a user