adding tests for msc device

test/project.yml

@@ -7,6 +7,7 @@
 
 :project:
   :use_exceptions: TRUE
+  :use_mocks: TRUE
   :use_test_preprocessor: TRUE
   :use_auxiliary_dependencies: TRUE
   :use_deep_dependencies: TRUE

test/test/device/msc/test_msc_device.c

@@ -0,0 +1,247 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 hathach for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "unity.h"
+
+// Files to test
+#include "tusb_fifo.h"
+#include "tusb.h"
+#include "usbd.h"
+TEST_FILE("usbd_control.c")
+TEST_FILE("msc_device.c")
+
+// Mock File
+#include "mock_dcd.h"
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+enum
+{
+  EDPT_CTRL_OUT = 0x00,
+  EDPT_CTRL_IN  = 0x80,
+
+  EDPT_MSC_OUT  = 0x01,
+  EDPT_MSC_IN   = 0x81,
+};
+
+uint8_t const rhport = 0;
+
+enum
+{
+  ITF_NUM_MSC,
+  ITF_NUM_TOTAL
+};
+
+uint8_t const data_desc_configuration[] =
+{
+  // Interface count, string index, total length, attribute, power in mA
+  TUD_CONFIG_DESCRIPTOR(ITF_NUM_TOTAL, 0, TUD_CONFIG_DESC_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
+
+  // Interface number, string index, EP Out & EP In address, EP size
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+};
+
+tusb_control_request_t const request_set_configuration =
+{
+  .bmRequestType = 0x80,
+  .bRequest      = TUSB_REQ_SET_CONFIGURATION,
+  .wValue        = 0,
+  .wIndex        = 0,
+  .wLength       = 0
+};
+
+uint8_t const* desc_configuration;
+
+
+enum
+{
+  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+  DISK_BLOCK_SIZE = 512
+};
+
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE];
+
+// Invoked when received SCSI_CMD_INQUIRY
+// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
+{
+  (void) lun;
+
+  const char vid[] = "TinyUSB";
+  const char pid[] = "Mass Storage";
+  const char rev[] = "1.0";
+
+  memcpy(vendor_id  , vid, strlen(vid));
+  memcpy(product_id , pid, strlen(pid));
+  memcpy(product_rev, rev, strlen(rev));
+}
+
+// Invoked when received Test Unit Ready command.
+// return true allowing host to read/write this LUN e.g SD card inserted
+bool tud_msc_test_unit_ready_cb(uint8_t lun)
+{
+  (void) lun;
+
+  return true; // RAM disk is always ready
+}
+
+// Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
+// Application update block count and block size
+void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
+{
+  (void) lun;
+
+  *block_count = DISK_BLOCK_NUM;
+  *block_size  = DISK_BLOCK_SIZE;
+}
+
+// Invoked when received Start Stop Unit command
+// - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
+// - Start = 1 : active mode, if load_eject = 1 : load disk storage
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
+{
+  (void) lun;
+  (void) power_condition;
+
+  return true;
+}
+
+// Callback invoked when received READ10 command.
+// Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  uint8_t const* addr = msc_disk[lba] + offset;
+  memcpy(buffer, addr, bufsize);
+
+  return bufsize;
+}
+
+// Callback invoked when received WRITE10 command.
+// Process data in buffer to disk's storage and return number of written bytes
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
+{
+  (void) lun;
+
+  uint8_t* addr = msc_disk[lba] + offset;
+  memcpy(addr, buffer, bufsize);
+
+  return bufsize;
+}
+
+// Callback invoked when received an SCSI command not in built-in list below
+// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
+// - READ10 and WRITE10 has their own callbacks
+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
+{
+  // read10 & write10 has their own callback and MUST not be handled here
+
+  void const* response = NULL;
+  uint16_t resplen = 0;
+
+  // most scsi handled is input
+  bool in_xfer = true;
+
+  switch (scsi_cmd[0])
+  {
+    case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
+      // Host is about to read/write etc ... better not to disconnect disk
+      resplen = 0;
+    break;
+
+    default:
+      // Set Sense = Invalid Command Operation
+      tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
+
+      // negative means error -> tinyusb could stall and/or response with failed status
+      resplen = -1;
+    break;
+  }
+
+  // return resplen must not larger than bufsize
+  if ( resplen > bufsize ) resplen = bufsize;
+
+  if ( response && (resplen > 0) )
+  {
+    if(in_xfer)
+    {
+      memcpy(buffer, response, resplen);
+    }else
+    {
+      // SCSI output
+    }
+  }
+
+  return resplen;
+}
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+uint8_t const * tud_descriptor_device_cb(void)
+{
+  return NULL;
+}
+
+uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
+{
+  return desc_configuration;
+}
+
+uint16_t const* tud_descriptor_string_cb(uint8_t index)
+{
+  return NULL;
+}
+
+void setUp(void)
+{
+  dcd_int_disable_Ignore();
+  dcd_int_enable_Ignore();
+
+  if ( !tusb_inited() )
+  {
+    dcd_init_Expect(rhport);
+    tusb_init();
+  }
+}
+
+void tearDown(void)
+{
+}
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+void test_msc(void)
+{
+  desc_configuration = data_desc_configuration;
+
+//  dcd_event_setup_received(rhport, (uint8_t*) &request_set_configuration, false);
+
+
+//  tud_task();
+}

test/test/device/usbd/test_usbd.c

@@ -29,10 +29,10 @@
 #include "tusb.h"
 #include "usbd.h"
 TEST_FILE("usbd_control.c")
-//TEST_FILE("usb_descriptors.c")
 
 // Mock File
 #include "mock_dcd.h"
+#include "mock_msc_device.h"
 
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
@@ -102,6 +102,7 @@ void setUp(void)
 
   if ( !tusb_inited() )
   {
+    mscd_init_Expect();
     dcd_init_Expect(rhport);
     tusb_init();
   }

test/test/support/tusb_config.h

@@ -73,11 +73,11 @@
 #define CFG_TUD_ENDOINT0_SIZE    64
 
 //------------- CLASS -------------//
-#define CFG_TUD_CDC              0
+//#define CFG_TUD_CDC              0
-#define CFG_TUD_MSC              0
+#define CFG_TUD_MSC              1
-#define CFG_TUD_HID              0
+//#define CFG_TUD_HID              0
-#define CFG_TUD_MIDI             0
+//#define CFG_TUD_MIDI             0
-#define CFG_TUD_VENDOR           0
+//#define CFG_TUD_VENDOR           0
 
 //------------- CDC -------------//