added hcd_edpt_close() stub for other ports

src/portable/mentor/musb/hcd_musb.c

@@ -804,6 +804,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen)
 {
   (void)rhport;

src/portable/nxp/khci/hcd_khci.c

@@ -541,6 +541,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 /* The address of buffer must be aligned to 4 byte boundary. And it must be at least 4 bytes long.
  * DMA writes data in 4 byte unit */
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)

src/portable/ohci/ohci.c

@@ -451,7 +451,6 @@ static void td_insert_to_ed(ohci_ed_t* p_ed, ohci_gtd_t * p_gtd)
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
-
 bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
 {
   (void) rhport;
@@ -486,6 +485,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8])
 {
   (void) rhport;

src/portable/raspberrypi/rp2040/hcd_rp2040.c

@@ -514,7 +514,6 @@ void hcd_int_disable(uint8_t rhport)
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
-
 bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc)
 {
   (void) rhport;
@@ -535,6 +534,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen)
 {
   (void) rhport;

src/portable/renesas/rusb2/hcd_rusb2.c

@@ -718,6 +718,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen)
 {
   bool r;

src/portable/synopsys/dwc2/hcd_dwc2.c

@@ -506,6 +506,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t*
   return true;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 // clean up channel after part of transfer is done but the whole urb is not complete
 static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) {
   hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id];

src/portable/template/hcd_template.c

@@ -36,24 +36,19 @@
 
 // optional hcd configuration, called by tuh_configure()
 bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
-  (void) rhport;
-  (void) cfg_id;
-  (void) cfg_param;
-
+  (void) rhport; (void) cfg_id; (void) cfg_param;
   return false;
 }
 
 // Initialize controller to host mode
 bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) {
-  (void) rhport;
-  (void) rh_init;
+  (void) rhport; (void) rh_init;
   return false;
 }
 
 // Interrupt Handler
 void hcd_int_handler(uint8_t rhport, bool in_isr) {
-  (void) rhport;
-  (void) in_isr;
+  (void) rhport; (void) in_isr;
 }
 
 // Enable USB interrupt
@@ -69,7 +64,6 @@ void hcd_int_disable(uint8_t rhport) {
 // Get frame number (1ms)
 uint32_t hcd_frame_number(uint8_t rhport) {
   (void) rhport;
-
   return 0;
 }
 
@@ -80,7 +74,6 @@ uint32_t hcd_frame_number(uint8_t rhport) {
 // Get the current connect status of roothub port
 bool hcd_port_connect_status(uint8_t rhport) {
   (void) rhport;
-
   return false;
 }
 
@@ -98,14 +91,12 @@ void hcd_port_reset_end(uint8_t rhport) {
 // Get port link speed
 tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
   (void) rhport;
-
   return TUSB_SPEED_FULL;
 }
 
 // HCD closes all opened endpoints belong to this device
 void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
-  (void) rhport;
-  (void) dev_addr;
+  (void) rhport; (void) dev_addr;
 }
 
 //--------------------------------------------------------------------+
@@ -114,49 +105,37 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
 
 // Open an endpoint
 bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
-  (void) rhport;
-  (void) dev_addr;
-  (void) ep_desc;
-
+  (void) rhport; (void) dev_addr; (void) ep_desc;
   return false;
 }
 
+bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) {
+  (void) rhport; (void) daddr; (void) ep_addr;
+  return false; // TODO not implemented yet
+}
+
 // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
 bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
-  (void) rhport;
-  (void) dev_addr;
-  (void) ep_addr;
-  (void) buffer;
-  (void) buflen;
-
+  (void) rhport; (void) dev_addr; (void) ep_addr; (void) buffer; (void) buflen;
   return false;
 }
 
 // Abort a queued transfer. Note: it can only abort transfer that has not been started
 // Return true if a queued transfer is aborted, false if there is no transfer to abort
 bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
-  (void) rhport;
-  (void) dev_addr;
-  (void) ep_addr;
-
+  (void) rhport; (void) dev_addr; (void) ep_addr;
   return false;
 }
 
 // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked
 bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
-  (void) rhport;
-  (void) dev_addr;
-  (void) setup_packet;
-
+  (void) rhport; (void) dev_addr; (void) setup_packet;
   return false;
 }
 
 // clear stall, data toggle is also reset to DATA0
 bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
-  (void) rhport;
-  (void) dev_addr;
-  (void) ep_addr;
-
+  (void) rhport; (void) dev_addr; (void) ep_addr;
   return false;
 }