add stm32f103ze_iar

hw/bsp/family_support.cmake

@@ -399,6 +399,11 @@ function(family_flash_jlink TARGET)
     set(JLINK_IF swd)
   endif ()
 
+  if (NOT DEFINED JLINK_OPTION)
+    set(JLINK_OPTION "")
+  endif ()
+  separate_arguments(OPTION_LIST UNIX_COMMAND ${JLINK_OPTION})
+
   file(GENERATE
     OUTPUT $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.jlink
     CONTENT "halt
@@ -410,7 +415,8 @@ exit"
 
   add_custom_target(${TARGET}-jlink
     DEPENDS ${TARGET}
-    COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.jlink
+    COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} ${OPTION_LIST} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.jlink
+    VERBATIM
     )
 endfunction()
 

hw/bsp/stm32f1/boards/stm32f103ze_iar/board.cmake

@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f103xe)
+set(JLINK_DEVICE stm32f103ze)
+
+string(TOUPPER ${MCU_VARIANT} MCU_VARIANT_UPPER)
+
+set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT_UPPER}_FLASH.ld)
+set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F103xE
+    HSE_VALUE=8000000U
+    )
+endfunction()

hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h

@@ -0,0 +1,97 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOF
+#define LED_PIN               GPIO_PIN_6
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PORT           GPIOG
+#define BUTTON_PIN            GPIO_PIN_8
+#define BUTTON_STATE_ACTIVE   0
+
+// USB Connect
+#define USB_CONNECT_PORT      GPIOG
+#define USB_CONNECT_PIN       GPIO_PIN_11
+#define USB_CONNECT_STATE     0
+
+// UART
+//#define UART_DEV              USART1
+//#define UART_CLK_EN           __HAL_RCC_USART1_CLK_ENABLE
+//#define UART_GPIO_PORT        GPIOA
+//#define UART_GPIO_AF          GPIO_AF1_USART1
+//#define UART_TX_PIN           GPIO_PIN_9
+//#define UART_RX_PIN           GPIO_PIN_10
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void board_stm32f1_clock_init(void)
+{
+  RCC_ClkInitTypeDef clkinitstruct = {0};
+  RCC_OscInitTypeDef oscinitstruct = {0};
+  RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0};
+
+  /* Enable HSE Oscillator and activate PLL with HSE as source */
+  oscinitstruct.OscillatorType  = RCC_OSCILLATORTYPE_HSE;
+  oscinitstruct.HSEState        = RCC_HSE_ON;
+  oscinitstruct.HSEPredivValue  = RCC_HSE_PREDIV_DIV1;
+  oscinitstruct.PLL.PLLMUL      = RCC_PLL_MUL9;
+  oscinitstruct.PLL.PLLState    = RCC_PLL_ON;
+  oscinitstruct.PLL.PLLSource   = RCC_PLLSOURCE_HSE;
+  HAL_RCC_OscConfig(&oscinitstruct);
+
+  /* USB clock selection */
+  rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+  HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit);
+
+  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
+  clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2);
+}
+
+static inline void board_vbus_sense_init(void)
+{
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

hw/bsp/stm32f1/boards/stm32f103ze_iar/board.mk

@@ -0,0 +1,13 @@
+MCU_VARIANT = stm32f103xe
+
+CFLAGS += -DSTM32F103xE -DHSE_VALUE=8000000U
+
+# Linker
+LD_FILE_GCC = ${ST_CMSIS}/Source/Templates/gcc/linker/STM32F103XE_FLASH.ld
+LD_FILE_IAR = ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf
+
+# For flash-jlink target
+JLINK_DEVICE = stm32f103ze
+
+# flash target ROM bootloader
+flash: flash-jlink

hw/bsp/stm32f1/family.c

@@ -57,6 +57,19 @@ void board_init(void) {
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOD_CLK_ENABLE();
 
+#ifdef __HAL_RCC_GPIOE_CLK_ENABLE
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+#endif
+
+#ifdef __HAL_RCC_GPIOF_CLK_ENABLE
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+#endif
+
+#ifdef __HAL_RCC_GPIOG_CLK_ENABLE
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+#endif
+
+
 #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
@@ -107,10 +120,18 @@ void board_init(void) {
   HAL_UART_Init(&UartHandle);
 #endif
 
+#ifdef USB_CONNECT_PIN
+  GPIO_InitStruct.Pin = USB_CONNECT_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(USB_CONNECT_PORT, &GPIO_InitStruct);
+#endif
+
   // USB Pins
   // Configure USB DM and DP pins.
   GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
-  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -119,6 +140,18 @@ void board_init(void) {
   __HAL_RCC_USB_CLK_ENABLE();
 }
 
+#ifdef USB_CONNECT_PIN
+void dcd_disconnect(uint8_t rhport) {
+  (void)rhport;
+  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, 1-USB_CONNECT_STATE);
+}
+
+void dcd_connect(uint8_t rhport) {
+  (void)rhport;
+  HAL_GPIO_WritePin(USB_CONNECT_PORT, USB_CONNECT_PIN, USB_CONNECT_STATE);
+}
+#endif
+
 //--------------------------------------------------------------------+
 // Board porting API
 //--------------------------------------------------------------------+

hw/bsp/stm32f1/family.mk

@@ -1,10 +1,10 @@
 ST_FAMILY = f1
-DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_${ST_FAMILY} hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver
 
-ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
+ST_CMSIS = hw/mcu/st/cmsis_device_${ST_FAMILY}
-ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+ST_HAL_DRIVER = hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver
 
-include $(TOP)/$(BOARD_PATH)/board.mk
+include ${TOP}/${BOARD_PATH}/board.mk
 CPU_CORE ?= cortex-m3
 
 # --------------
@@ -29,23 +29,23 @@ LDFLAGS_GCC += \
 # ------------------------
 SRC_C += \
   src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
-  $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
+  ${ST_CMSIS}/Source/Templates/system_stm32${ST_FAMILY}xx.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_cortex.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_rcc.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_rcc_ex.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_gpio.c \
-  $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c
+  ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_uart.c
 
 INC += \
-  $(TOP)/$(BOARD_PATH) \
+  ${TOP}/${BOARD_PATH} \
-  $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+  ${TOP}/lib/CMSIS_5/CMSIS/Core/Include \
-  $(TOP)/$(ST_CMSIS)/Include \
+  ${TOP}/${ST_CMSIS}/Include \
-  $(TOP)/$(ST_HAL_DRIVER)/Inc
+  ${TOP}/${ST_HAL_DRIVER}/Inc
 
 # Startup
-SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_GCC += ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s
-SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
+SRC_S_IAR += ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s
 
 # flash target ROM bootloader: flash-dfu-util
 DFU_UTIL_OPTION = -a 0 --dfuse-address 0x08000000