Merge branch 'hathach:master' into nxp_k64

hw/bsp/family_support.cmake

@@ -40,6 +40,7 @@ if (NOT FAMILY STREQUAL rp2040)
   # enable LTO if supported skip rp2040
   include(CheckIPOSupported)
   check_ipo_supported(RESULT IPO_SUPPORTED)
+  cmake_print_variables(IPO_SUPPORTED)
   if (IPO_SUPPORTED)
     set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
   endif()
@@ -71,7 +72,7 @@ set(WARNING_FLAGS_GNU
   -Wredundant-decls
   )
 
-set(WARNINGS_FLAGS_IAR "")
+set(WARNING_FLAGS_IAR "")
 
 
 # Filter example based on only.txt and skip.txt
@@ -190,16 +191,24 @@ function(family_configure_common TARGET RTOS)
   )
 
   # run size after build
-  add_custom_command(TARGET ${TARGET} POST_BUILD
-    COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${TARGET}>
-    )
-
+  find_program(SIZE_EXE ${CMAKE_SIZE})
+  if(NOT ${SIZE_EXE} STREQUAL SIZE_EXE-NOTFOUND)
+    add_custom_command(TARGET ${TARGET} POST_BUILD
+      COMMAND ${SIZE_EXE} $<TARGET_FILE:${TARGET}>
+      )
+  endif ()
   # Add warnings flags
   target_compile_options(${TARGET} PUBLIC ${WARNING_FLAGS_${CMAKE_C_COMPILER_ID}})
 
   # Generate linker map file
   if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
     target_link_options(${TARGET} PUBLIC "LINKER:-Map=$<TARGET_FILE:${TARGET}>.map")
+    if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0)
+      target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments")
+    endif ()
+  endif()
+  if (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${TARGET} PUBLIC "LINKER:--map=$<TARGET_FILE:${TARGET}>.map")
   endif()
 
   # ETM Trace option
@@ -216,6 +225,7 @@ function(family_configure_common TARGET RTOS)
       if (NOT TARGET segger_rtt)
         add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c)
         target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT)
+        #target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL)
       endif()
       target_link_libraries(${TARGET} PUBLIC segger_rtt)
     endif ()
@@ -252,6 +262,15 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS)
     # link tinyusb with freeRTOS kernel
     target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel)
   endif ()
+
+  # use max3421 as host controller
+  if (MAX3421_HOST STREQUAL "1")
+    target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUH_MAX3421=1)
+    target_sources(${TARGET}-tinyusb PUBLIC
+      ${TOP}/src/portable/analog/max3421/hcd_max3421.c
+      )
+  endif ()
+
 endfunction()
 
 
@@ -278,13 +297,11 @@ function(family_configure_device_example TARGET RTOS)
   family_configure_example(${TARGET} ${RTOS})
 endfunction()
 
-
 # Configure host example with RTOS
 function(family_configure_host_example TARGET RTOS)
   family_configure_example(${TARGET} ${RTOS})
 endfunction()
 
-
 # Configure host + device example with RTOS
 function(family_configure_dual_usb_example TARGET RTOS)
   family_configure_example(${TARGET} ${RTOS})
@@ -355,7 +372,7 @@ function(family_flash_jlink TARGET)
   endif ()
 
   file(GENERATE
-    OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink
+    OUTPUT $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.jlink
     CONTENT "halt
 loadfile $<TARGET_FILE:${TARGET}>
 r
@@ -365,7 +382,7 @@ exit"
 
   add_custom_target(${TARGET}-jlink
     DEPENDS ${TARGET}
-    COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink
+    COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.jlink
     )
 endfunction()
 
@@ -383,6 +400,22 @@ function(family_flash_stlink TARGET)
 endfunction()
 
 
+# Add flash openocd target
+function(family_flash_openocd TARGET CLI_OPTIONS)
+  if (NOT DEFINED OPENOCD)
+    set(OPENOCD openocd)
+  endif ()
+
+  separate_arguments(CLI_OPTIONS_LIST UNIX_COMMAND ${CLI_OPTIONS})
+
+  # note skip verify since it has issue with rp2040
+  add_custom_target(${TARGET}-openocd
+    DEPENDS ${TARGET}
+    COMMAND ${OPENOCD} ${CLI_OPTIONS_LIST} -c "program $<TARGET_FILE:${TARGET}> reset exit"
+    VERBATIM
+    )
+endfunction()
+
 # Add flash pycod target
 function(family_flash_pyocd TARGET)
   if (NOT DEFINED PYOC)
@@ -449,5 +482,10 @@ if (NOT FAMILY_MCUS)
   set(FAMILY_MCUS ${FAMILY})
 endif()
 
+# if use max3421 as host controller, expand FAMILY_MCUS to include max3421
+if (MAX3421_HOST STREQUAL "1")
+  set(FAMILY_MCUS ${FAMILY_MCUS} MAX3421)
+endif ()
+
 # save it in case of re-inclusion
 set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "")