andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

rename coreid to port

Browse Source
This commit is contained in:
hathach
2018-03-09 14:29:23 +07:00
parent b608f8895a
commit eaaebc2b88
18 changed files with 265 additions and 265 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
tinyusb/class/msc/msc_device.c
View File

@@ -79,12 +79,12 @@ void mscd_init(void)
memclr_(&mscd_data, sizeof(mscd_interface_t));
}
void mscd_close(uint8_t coreid)
void mscd_close(uint8_t port)
{
memclr_(&mscd_data, sizeof(mscd_interface_t));
}
tusb_error_t mscd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length)
tusb_error_t mscd_open(uint8_t port, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length)
{
ASSERT( ( MSC_SUBCLASS_SCSI == p_interface_desc->bInterfaceSubClass &&
MSC_PROTOCOL_BOT == p_interface_desc->bInterfaceProtocol ), TUSB_ERROR_MSC_UNSUPPORTED_PROTOCOL );
@@ -101,7 +101,7 @@ tusb_error_t mscd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_int
endpoint_handle_t * p_edpt_hdl = ( p_endpoint->bEndpointAddress & TUSB_DIR_DEV_TO_HOST_MASK ) ?
&p_msc->edpt_in : &p_msc->edpt_out;
VERIFY( hal_dcd_pipe_open(coreid, p_endpoint, p_edpt_hdl), TUSB_ERROR_DCD_FAILED );
VERIFY( hal_dcd_pipe_open(port, p_endpoint, p_edpt_hdl), TUSB_ERROR_DCD_FAILED );
p_endpoint = (tusb_descriptor_endpoint_t const *) descriptor_next( (uint8_t const*) p_endpoint );
}
@@ -115,7 +115,7 @@ tusb_error_t mscd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_int
return TUSB_ERROR_NONE;
}
tusb_error_t mscd_control_request_subtask(uint8_t coreid, tusb_control_request_t const * p_request)
tusb_error_t mscd_control_request_subtask(uint8_t port, tusb_control_request_t const * p_request)
{
ASSERT(p_request->bmRequestType_bit.type == TUSB_REQUEST_TYPE_CLASS, TUSB_ERROR_DCD_CONTROL_REQUEST_NOT_SUPPORT);
@@ -124,12 +124,12 @@ tusb_error_t mscd_control_request_subtask(uint8_t coreid, tusb_control_request_t
switch(p_request->bRequest)
{
case MSC_REQUEST_RESET:
hal_dcd_control_xfer(coreid, TUSB_DIR_HOST_TO_DEV, NULL, 0, false);
hal_dcd_control_xfer(port, TUSB_DIR_HOST_TO_DEV, NULL, 0, false);
break;
case MSC_REQUEST_GET_MAX_LUN:
p_msc->scsi_data[0] = p_msc->max_lun; // Note: lpc11/13u need xfer data's address to be aligned 64 -> make use of scsi_data instead of using max_lun directly
hal_dcd_control_xfer(coreid, TUSB_DIR_DEV_TO_HOST, p_msc->scsi_data, 1, false);
hal_dcd_control_xfer(port, TUSB_DIR_DEV_TO_HOST, p_msc->scsi_data, 1, false);
break;
default:
@@ -174,7 +174,7 @@ tusb_error_t mscd_xfer_cb(endpoint_handle_t edpt_hdl, tusb_event_t event, uint32
// TODO SCSI data out transfer is not yet supported
ASSERT_FALSE( p_cbw->xfer_bytes > 0 && !BIT_TEST_(p_cbw->dir, 7), TUSB_ERROR_NOT_SUPPORTED_YET);
p_csw->status = tud_msc_scsi_cb(edpt_hdl.coreid, p_cbw->lun, p_cbw->command, &p_buffer, &actual_length);
p_csw->status = tud_msc_scsi_cb(edpt_hdl.port, p_cbw->lun, p_cbw->command, &p_buffer, &actual_length);
//------------- Data Phase (non READ10, WRITE10) -------------//
if ( p_cbw->xfer_bytes )
@@ -230,8 +230,8 @@ static bool read10_write10_data_xfer(mscd_interface_t* p_msc)
uint16_t const block_count = __be2n_16(p_readwrite->block_count);
void *p_buffer = NULL;
uint16_t xferred_block = (SCSI_CMD_READ_10 == p_cbw->command[0]) ? tud_msc_read10_cb (edpt_hdl.coreid, p_cbw->lun, &p_buffer, lba, block_count) :
tud_msc_write10_cb(edpt_hdl.coreid, p_cbw->lun, &p_buffer, lba, block_count);
uint16_t xferred_block = (SCSI_CMD_READ_10 == p_cbw->command[0]) ? tud_msc_read10_cb (edpt_hdl.port, p_cbw->lun, &p_buffer, lba, block_count) :
tud_msc_write10_cb(edpt_hdl.port, p_cbw->lun, &p_buffer, lba, block_count);
xferred_block = min16_of(xferred_block, block_count);
uint16_t const xferred_byte = xferred_block * (p_cbw->xfer_bytes / block_count);