andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

clean up example to use CFG_TUD_ENABLED + CFG_TUD_MAX_SPEED instead of CFG_TUSB_RHPORT0_MODE

Browse Source
This commit is contained in:
hathach
2022-06-06 17:35:17 +07:00
parent 1b08672945
commit f4c80dd218
6 changed files with 89 additions and 95 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
examples/device/audio_4_channel_mic/src/main.c
View File

@@ -81,7 +81,8 @@ int main(void)
{
board_init();
tusb_init();
// init device stack on configured roothub port
tud_init(BOARD_TUD_RHPORT);
// Init values
sampFreq = AUDIO_SAMPLE_RATE;

63
examples/device/audio_4_channel_mic/src/tusb_config.h
View File

@@ -30,6 +30,20 @@
extern "C" {
#endif
//--------------------------------------------------------------------+
// Board Specific Configuration
//--------------------------------------------------------------------+
// RHPort number used for device can be defined by board.mk, default to port 0
#ifndef BOARD_TUD_RHPORT
#define BOARD_TUD_RHPORT 0
#endif
// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUD_MAX_SPEED
#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED
#endif
//--------------------------------------------------------------------
// COMMON CONFIGURATION
//--------------------------------------------------------------------
@@ -39,18 +53,19 @@ extern "C" {
#error CFG_TUSB_MCU must be defined
#endif
#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE
#ifndef CFG_TUSB_OS
#define CFG_TUSB_OS OPT_OS_NONE
#define CFG_TUSB_OS OPT_OS_NONE
#endif
#ifndef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG 0
#define CFG_TUSB_DEBUG 0
#endif
// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
// #define CFG_TUSB_DEBUG 0
// Enable Device stack
#define CFG_TUD_ENABLED 1
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED
/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
* Tinyusb use follows macros to declare transferring memory so that they can be put
@@ -64,7 +79,7 @@ extern "C" {
#endif
#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4)))
#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4)))
#endif
//--------------------------------------------------------------------
@@ -75,13 +90,7 @@ extern "C" {
#define CFG_TUD_ENDPOINT0_SIZE 64
#endif
//------------- CLASS -------------//
#define CFG_TUD_CDC 0
#define CFG_TUD_MSC 0
#define CFG_TUD_HID 0
#define CFG_TUD_MIDI 0
#define CFG_TUD_AUDIO 1
#define CFG_TUD_VENDOR 0
//--------------------------------------------------------------------
// AUDIO CLASS DRIVER CONFIGURATION
@@ -89,23 +98,23 @@ extern "C" {
// Have a look into audio_device.h for all configurations
#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN
#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1
#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64
#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1
#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64
#define CFG_TUD_AUDIO_ENABLE_EP_IN 1
#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN
#define CFG_TUD_AUDIO_ENABLE_EP_IN 1
#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - the Windows driver always needs an extra sample per channel of space more, otherwise it complains... found by trial and error
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN
#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN
#define CFG_TUD_AUDIO_ENABLE_ENCODING 1
#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1
#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
#define CFG_TUD_AUDIO_ENABLE_ENCODING 1
#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1
#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO)
#ifdef __cplusplus
}