Merge branch 'master' into renesas-ra

hw/bsp/rx/boards/gr_citrus/board.mk

@@ -1,5 +1,3 @@
-DEPS_SUBMODULES += hw/mcu/renesas/rx
-
 CFLAGS += \
   -mcpu=rx610 \
   -misa=v1 \

hw/bsp/stm32h7/boards/daisyseed/board.h

@@ -57,9 +57,9 @@
 //--------------------------------------------------------------------+
 static inline void board_stm32h7_clock_init(void)
 {
-  RCC_ClkInitTypeDef RCC_ClkInitStruct;
-  RCC_OscInitTypeDef RCC_OscInitStruct;
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 };
 
   /*!< Supply configuration update enable */
   /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */

hw/bsp/stm32h7/boards/stm32h723nucleo/board.h

@@ -64,8 +64,8 @@
 //--------------------------------------------------------------------+
 static inline void board_stm32h7_clock_init(void)
 {
-  RCC_ClkInitTypeDef RCC_ClkInitStruct;
-  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
 
   /* The PWR block is always enabled on the H7 series- there is no clock
      enable. For now, use the default VOS3 scale mode (lowest) and limit clock
@@ -111,7 +111,7 @@ static inline void board_stm32h7_clock_init(void)
      separate. However, the main system PLL (PLL1) doesn't have a direct
      connection to the USB peripheral clock to generate 48 MHz, so we do this
      dance. This will connect PLL1's Q output to the USB peripheral clock. */
-  RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
+  RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct = { 0 };
 
   RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
   RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL;

hw/bsp/stm32h7/boards/stm32h743eval/board.h

@@ -63,9 +63,9 @@
 //--------------------------------------------------------------------+
 static inline void board_stm32h7_clock_init(void)
 {
-  RCC_ClkInitTypeDef RCC_ClkInitStruct;
-  RCC_OscInitTypeDef RCC_OscInitStruct;
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 };
 
   /*!< Supply configuration update enable */
   HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);

hw/bsp/stm32h7/boards/stm32h743nucleo/board.h

@@ -55,8 +55,8 @@
 //--------------------------------------------------------------------+
 static inline void board_stm32h7_clock_init(void)
 {
-  RCC_ClkInitTypeDef RCC_ClkInitStruct;
-  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
 
   /* The PWR block is always enabled on the H7 series- there is no clock
      enable. For now, use the default VOS3 scale mode (lowest) and limit clock
@@ -102,7 +102,7 @@ static inline void board_stm32h7_clock_init(void)
      separate. However, the main system PLL (PLL1) doesn't have a direct
      connection to the USB peripheral clock to generate 48 MHz, so we do this
      dance. This will connect PLL1's Q output to the USB peripheral clock. */
-  RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct;
+  RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct = { 0 };
 
   RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
   RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL;

hw/bsp/stm32h7/boards/stm32h745disco/board.h

@@ -57,9 +57,9 @@
 //--------------------------------------------------------------------+
 static inline void board_stm32h7_clock_init(void)
 {
-  RCC_ClkInitTypeDef RCC_ClkInitStruct;
-  RCC_OscInitTypeDef RCC_OscInitStruct;
-  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
+  RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 };
 
   /*!< Supply configuration update enable */
   /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */