andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity

add stm32f769disco into f7 family

Browse Source
This commit is contained in:
hathach
2021-01-13 14:17:15 +07:00
parent e252fade2c
commit fecad9bab4
7 changed files with 176 additions and 366 deletions
Download Patch File Download Diff File Expand all files Collapse all files

74
hw/bsp/stm32f7/family.c
View File

@@ -60,6 +60,13 @@ void board_init(void)
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT
__HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT
#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE
__HAL_RCC_GPIOJ_CLK_ENABLE();
#endif
UART_CLK_EN();
#if CFG_TUSB_OS == OPT_OS_NONE
@@ -102,7 +109,8 @@ void board_init(void)
HAL_UART_Init(&UartHandle);
#if BOARD_DEVICE_RHPORT_NUM == 0
/* Configure USB FS GPIOs */
// OTG_FS
/* Configure DM DP Pins */
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -131,7 +139,11 @@ void board_init(void)
USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
#else
/* Configure USB HS GPIOs */
// OTG_HS
#ifdef __HAL_RCC_OTGPHYC_CLK_ENABLE
// MCU with built-in HS PHY such as F723, F733, F730
/* Configure DM DP Pins */
GPIO_InitStruct.Pin = (GPIO_PIN_14 | GPIO_PIN_15);
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
@@ -153,11 +165,60 @@ void board_init(void)
/* Enable PHYC Clocks */
__HAL_RCC_OTGPHYC_CLK_ENABLE();
/* Enable USB HS Clocks */
__HAL_RCC_USB_OTG_HS_CLK_ENABLE();
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
#else
// MUC with external ULPI PHY
// Enable VBUS sense (B device) via pin PA9
/* Configure USB HS GPIOs */
/* ULPI CLK */
GPIO_InitStruct.Pin = GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* D0 */
GPIO_InitStruct.Pin = GPIO_PIN_3;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* D1 D2 D3 D4 D5 D6 D7 */
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* STP */
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
/* NXT */
GPIO_InitStruct.Pin = GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/* DIR */
GPIO_InitStruct.Pin = GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
#endif
/* Enable USB HS & ULPI Clocks */
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
__HAL_RCC_USB_OTG_HS_CLK_ENABLE();
// No VBUS sense
USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
// B-peripheral session valid override enable
@@ -169,6 +230,7 @@ void board_init(void)
USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
#endif
}
//--------------------------------------------------------------------+