working on nrf52

examples/device/device_virtual_com/src/main.c

@@ -114,7 +114,7 @@ void led_blinking_task(void)
 {
   enum { BLINK_INTEVAL = 1000 };
 
-  static uint32_t led_on_mask = 0;
+  static bool led_state = false;
   static uint32_t last_blink = 0;
 
   // not enough time
@@ -122,8 +122,8 @@ void led_blinking_task(void)
 
   last_blink += BLINK_INTEVAL;
 
-  board_leds(led_on_mask, 1 - led_on_mask);
+  board_led_control(BOARD_LED0, led_state);
-  led_on_mask = 1 - led_on_mask; // toggle
+  led_state = 1 - led_state; // toggle
 }
 
 //--------------------------------------------------------------------+

examples/device/device_virtual_com/xpresso/.project

@@ -40,4 +40,24 @@
 			<locationURI>PARENT-4-PROJECT_LOC/tinyusb</locationURI>
 		</link>
 	</linkedResources>
+	<filteredResources>
+		<filter>
+			<id>1520932840443</id>
+			<name></name>
+			<type>22</type>
+			<matcher>
+				<id>org.eclipse.ui.ide.multiFilter</id>
+				<arguments>1.0-name-matches-false-false-*.d</arguments>
+			</matcher>
+		</filter>
+		<filter>
+			<id>1520932840444</id>
+			<name></name>
+			<type>22</type>
+			<matcher>
+				<id>org.eclipse.ui.ide.multiFilter</id>
+				<arguments>1.0-name-matches-false-false-*.o</arguments>
+			</matcher>
+		</filter>
+	</filteredResources>
 </projectDescription>

examples/device/nrf52840/src/main.c

@@ -63,7 +63,7 @@ int main(void)
   board_init();
   print_greeting();
 
-  //tusb_init();
+  tusb_init();
 
   while (1)
   {
@@ -114,7 +114,7 @@ void led_blinking_task(void)
 {
   enum { BLINK_INTEVAL = 1000 };
 
-  static uint32_t led_on_mask = 0;
+  static bool led_state = false;
   static uint32_t last_blink = 0;
 
   // not enough time
@@ -122,8 +122,8 @@ void led_blinking_task(void)
 
   last_blink += BLINK_INTEVAL;
 
-  board_leds(led_on_mask, 1 - led_on_mask);
+  board_led_control(BOARD_LED0, led_state);
-  led_on_mask = 1 - led_on_mask; // toggle
+  led_state = 1 - led_state; // toggle
 }
 
 //--------------------------------------------------------------------+

hw/bsp/board.h

@@ -131,13 +131,21 @@
 /// Initialize all required peripherals on board including uart, led, buttons etc ...
 void board_init(void);
 
-/** \brief Turns on and off leds on the board
+
- * \param[in]  on_mask  Bitmask for LED's numbers is turning ON
+#define BOARD_LED0    0
- * \param[out] off_mask Bitmask for LED's numbers is turning OFF
+
- * \note the \a on_mask is more priority then \a off_mask, if an led's number is present on both.
+void board_led_control(uint32_t led_id, bool state);
- * It will be turned ON.
+
- */
+static inline void board_led_on(uint32_t led_id)
-void board_leds(uint32_t on_mask, uint32_t off_mask);
+{
+  board_led_control(led_id, true);
+}
+
+static inline void board_led_off(uint32_t led_id)
+{
+  board_led_control(led_id, false);
+}
+
 
 /** \brief Get the current state of the buttons on the board
  * \return Bitmask where a '1' means active (pressed), a '0' means inactive.
@@ -156,19 +164,6 @@ void board_uart_putchar(uint8_t c);
 
 /** @} */
 
-#if 0
-//------------- Board Application  -------------//
-void led_blinking_task(void* param);
-
-/// Initialize the LED blinking task application. The initial blinking rate is 1 Hert (1 per second)
-void led_blinking_init(void);
-
-/** \brief Change the blinking rate.
- * \param[in]  ms The interval between on and off.
- */
-void led_blinking_set_interval(uint32_t ms);
-#endif
-
 #ifdef __cplusplus
  }
 #endif

hw/bsp/ea4357/board_ea4357.c

@@ -116,9 +116,11 @@ void board_init(void)
 //--------------------------------------------------------------------+
 // LEDS
 //--------------------------------------------------------------------+
-void board_leds(uint32_t on_mask, uint32_t off_mask)
+void board_led_control(uint32_t id, bool state)
 {
-  pca9532_setLeds( on_mask << 8, off_mask << 8);
+  uint16_t on_mask  = state ? (1 << id) : 0;
+  uint16_t off_mask = state ? 0 : (1 << id);
+  pca9532_setLeds( on_mask << 8, off_mask << 8 );
 }
 
 //--------------------------------------------------------------------+

hw/bsp/ea4357/board_ea4357.h

@@ -53,6 +53,8 @@
 
 #include "oem_base_board/pca9532.h" // LEDs
 
+#define BOARD_LED_NUM   1
+
 
 //#define CFG_PRINTF_TARGET       PRINTF_TARGET_SWO
 #define CFG_PRINTF_TARGET       PRINTF_TARGET_UART

hw/bsp/pca10056/board_pca10056.c

@@ -43,6 +43,7 @@
  *------------------------------------------------------------------*/
 #define LED_1           13
 #define LED_STATE_ON    0
+#define LED_STATE_OFF   (1-LED_STATE_ON)
 
 
 /*------------------------------------------------------------------*/
@@ -60,17 +61,10 @@ void board_init(void)
   NVIC_EnableIRQ(SysTick_IRQn);
 }
 
-void board_leds(uint32_t on_mask, uint32_t off_mask)
+void board_led_control(uint32_t led_id, bool state)
 {
-  if (on_mask)
+  (void) led_id;
-  {
+  nrf_gpio_pin_write(LED_1, state ? LED_STATE_ON : LED_STATE_OFF);
-    nrf_gpio_pin_write(LED_1, LED_STATE_ON);
-  }
-
-  if ( off_mask)
-  {
-    nrf_gpio_pin_write(LED_1, 1-LED_STATE_ON);
-  }
 }
 
 uint32_t board_buttons(void)

hw/bsp/pca10056/board_pca10056.h

@@ -42,6 +42,7 @@
  extern "C" {
 #endif
 
+#define BOARD_LED_NUM   1
 
 #ifdef __cplusplus
  }

hw/mcu/nordic/nrf52/tusb_port/dcd_nrf52.c

@@ -0,0 +1,67 @@
+/**************************************************************************/
+/*!
+    @file     dcd_nrf52.c
+    @author   hathach
+
+    @section LICENSE
+
+    Software License Agreement (BSD License)
+
+    Copyright (c) 2018, hathach (tinyusb.org)
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+    1. Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+    3. Neither the name of the copyright holders nor the
+    names of its contributors may be used to endorse or promote products
+    derived from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+// TODO remove
+#include "nrf.h"
+#include "nrf_power.h"
+#include "nrf_drv_usbd.h"
+
+/*------------------------------------------------------------------*/
+/* MACRO TYPEDEF CONSTANT ENUM
+ *------------------------------------------------------------------*/
+
+/*------------------------------------------------------------------*/
+/* VARIABLE DECLARATION
+ *------------------------------------------------------------------*/
+
+/*------------------------------------------------------------------*/
+/* Controller API
+ *------------------------------------------------------------------*/
+bool tusb_dcd_init (uint8_t port)
+{
+  // TODO USB power detection
+  nrf_power_int_enable(
+                NRF_POWER_INT_USBDETECTED_MASK |
+                NRF_POWER_INT_USBREMOVED_MASK  |
+                NRF_POWER_INT_USBPWRRDY_MASK);
+
+  nrf_drv_usbd_enable();
+}
+
+void tusb_dcd_connect          (uint8_t port);
+void tusb_dcd_disconnect       (uint8_t port);
+void tusb_dcd_set_address      (uint8_t port, uint8_t dev_addr);
+void tusb_dcd_set_config       (uint8_t port, uint8_t config_num);

hw/mcu/nordic/nrf52/tusb_port/dcd_nrf52.h

@@ -1,13 +1,13 @@
 /**************************************************************************/
 /*!
-    @file     board.c
+    @file     dcd_nrf52.h
-    @author   hathach (tinyusb.org)
+    @author   hathach
 
     @section LICENSE
 
     Software License Agreement (BSD License)
 
-    Copyright (c) 2013, hathach (tinyusb.org)
+    Copyright (c) 2018, hathach (tinyusb.org)
     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
@@ -26,38 +26,25 @@
     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-    This file is part of the tinyusb stack.
 */
 /**************************************************************************/
+#ifndef DCD_NRF52_H_
+#define DCD_NRF52_H_
 
-#include "board.h"
-//#include "app_os_prio.h"
 
-#if TUSB_CFG_OS == TUSB_OS_NONE
-
-volatile uint32_t system_ticks = 0;
-
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t tusb_hal_tick_get(void)
-{
-  return system_ticks;
-}
 
+#ifdef __cplusplus
+ extern "C" {
 #endif
 
-// TODO remove legacy cmsis code
+
-void check_failed(uint8_t *file, uint32_t line)
+#ifdef __cplusplus
-{
+ }
-  (void) file;
+#endif
-  (void) line;
+
-}
+#endif /* DCD_NRF52_H_ */

hw/mcu/nordic/nrf52/tusb_port/hal_nrf52.c

@@ -62,16 +62,16 @@ void SysTick_Handler (void)
 
 bool tusb_hal_init(void)
 {
-
+  return true;
 }
 
-void tusb_hal_init_enable(uint8_t port)
+void tusb_hal_int_enable(uint8_t port)
 {
   (void) port;
   NVIC_EnableIRQ(USBD_IRQn);
 }
 
-void tusb_hal_init_disable(uint8_t port)
+void tusb_hal_int_disable(uint8_t port)
 {
   (void) port;
   NVIC_DisableIRQ(USBD_IRQn);

hw/mcu/nxp/lpc11uxx/hal_mcu/hal_lpc11uxx.c

@@ -41,13 +41,13 @@
 
 #if TUSB_CFG_MCU == MCU_LPC11UXX
 
-void tusb_hal_init_enable(uint8_t port)
+void tusb_hal_int_enable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_EnableIRQ(USB_IRQn);
 }
 
-void tusb_hal_init_disable(uint8_t port)
+void tusb_hal_int_disable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_DisableIRQ(USB_IRQn);

hw/mcu/nxp/lpc13uxx/hal_mcu/hal_lpc13uxx.c

@@ -41,13 +41,13 @@
 
 #if TUSB_CFG_MCU == MCU_LPC13UXX
 
-void tusb_hal_init_enable(uint8_t port)
+void tusb_hal_int_enable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_EnableIRQ(USB_IRQ_IRQn);
 }
 
-void tusb_hal_init_disable(uint8_t port)
+void tusb_hal_int_disable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_DisableIRQ(USB_IRQ_IRQn);

hw/mcu/nxp/lpc175x_6x/hal_mcu/hal_lpc175x_6x.c

@@ -41,13 +41,13 @@
 
 #if TUSB_CFG_MCU == MCU_LPC175X_6X
 
-void tusb_hal_init_enable(uint8_t port)
+void tusb_hal_int_enable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_EnableIRQ(USB_IRQn);
 }
 
-void tusb_hal_init_disable(uint8_t port)
+void tusb_hal_int_disable(uint8_t port)
 {
   (void) port; // discard compiler's warning
   NVIC_DisableIRQ(USB_IRQn);
@@ -111,4 +111,10 @@ void USB_IRQHandler(void)
   #endif
 }
 
+void check_failed(uint8_t *file, uint32_t line)
+{
+  (void) file;
+  (void) line;
+}
+
 #endif

hw/mcu/nxp/lpc43xx/tusb_port/dcd_lpc43xx.c

@@ -160,6 +160,9 @@ bool tusb_dcd_init(uint8_t port)
   lpc_usb->USBCMD_D &= ~0x00FF0000; // Interrupt Threshold Interval = 0
   lpc_usb->USBCMD_D |= BIT_(0); // connect
 
+  // enable interrupt
+  NVIC_EnableIRQ(port ? USB1_IRQn : USB0_IRQn);
+
   return true;
 }
 

hw/mcu/nxp/lpc43xx/tusb_port/hal_lpc43xx.c

@@ -53,6 +53,22 @@ enum {
   LPC43XX_USBMODE_VBUS_HIGH = 1
 };
 
+#if TUSB_CFG_OS == TUSB_OS_NONE
+
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t tusb_hal_tick_get(void)
+{
+  return system_ticks;
+}
+
+#endif
+
 void tusb_hal_dbg_breakpoint(void)
 {
   // M0 cannot check if debugger is attached or not
@@ -65,12 +81,12 @@ void tusb_hal_dbg_breakpoint(void)
 #endif
 }
 
-void tusb_hal_init_enable(uint8_t port)
+void tusb_hal_int_enable(uint8_t port)
 {
   NVIC_EnableIRQ(port ? USB1_IRQn : USB0_IRQn);
 }
 
-void tusb_hal_init_disable(uint8_t port)
+void tusb_hal_int_disable(uint8_t port)
 {
   NVIC_DisableIRQ(port ? USB1_IRQn : USB0_IRQn);
 }
@@ -167,4 +183,11 @@ void USB1_IRQHandler(void)
 }
 #endif
 
+
+void check_failed(uint8_t *file, uint32_t line)
+{
+  (void) file;
+  (void) line;
+}
+
 #endif

tinyusb/osal/osal_none.h

@@ -204,11 +204,11 @@ static inline void osal_queue_flush(osal_queue_t const queue_hdl)
       else\
         return TUSB_ERROR_OSAL_WAITING;\
     } else{\
-      /*TODO mutex lock tusb_hal_init_disable */\
+      /*TODO mutex lock tusb_hal_int_disable */\
       memcpy(p_data, queue_hdl->buffer + (queue_hdl->rd_idx * queue_hdl->item_size), queue_hdl->item_size);\
       queue_hdl->rd_idx = (queue_hdl->rd_idx + 1) % queue_hdl->depth;\
       queue_hdl->count--;\
-      /*TODO mutex unlock tusb_hal_init_enable */\
+      /*TODO mutex unlock tusb_hal_int_enable */\
       *(p_error) = TUSB_ERROR_NONE;\
     }\
   }while(0)
@@ -258,7 +258,7 @@ static inline void osal_semaphore_reset(osal_semaphore_t sem_hdl)
       else\
         return TUSB_ERROR_OSAL_WAITING;\
     } else{\
-      if (sem_hdl->count) sem_hdl->count--; /*TODO mutex tusb_hal_init_disable consideration*/\
+      if (sem_hdl->count) sem_hdl->count--; /*TODO mutex tusb_hal_int_disable consideration*/\
       *(p_error) = TUSB_ERROR_NONE;\
     }\
   }while(0)

tinyusb/tusb.c

@@ -52,14 +52,6 @@ tusb_error_t tusb_init(void)
   ASSERT_STATUS ( usbd_init() ); // device stack init
 #endif
 
-#if (TUSB_CFG_CONTROLLER_0_MODE)
-  tusb_hal_init_enable(0);
-#endif
-
-#if (TUSB_CFG_CONTROLLER_1_MODE)
-  tusb_hal_init_enable(1);
-#endif
-
   return TUSB_ERROR_NONE;
 }
 

tinyusb/tusb_dcd.h

@@ -43,8 +43,7 @@
 #ifndef _TUSB_DCD_H_
 #define _TUSB_DCD_H_
 
-#include <stdint.h>
+#include "common/tusb_common.h"
-#include <stdbool.h>
 
 #ifdef __cplusplus
  extern "C" {

tinyusb/tusb_hal.h

@@ -46,12 +46,7 @@ extern "C" {
 //--------------------------------------------------------------------+
 // INCLUDES
 //--------------------------------------------------------------------+
-#include "tusb_option.h"
+#include "common/tusb_common.h"
-#include <stdbool.h>
-#include <stdint.h>
-
-#include "common/tusb_errors.h"
-#include "common/compiler/compiler.h"
 
 //--------------------------------------------------------------------+
 // HAL API
@@ -73,12 +68,12 @@ bool tusb_hal_init(void);
 /** \brief 			Enable USB Interrupt on a specific USB Controller
  * \param[in]		port	is a zero-based index to identify USB controller's ID
  */
-void tusb_hal_init_enable(uint8_t port);
+void tusb_hal_int_enable(uint8_t port);
 
 /** \brief 			Disable USB Interrupt on a specific USB Controller
  * \param[in]		port	is a zero-based index to identify USB controller's ID
  */
-void tusb_hal_init_disable(uint8_t port);
+void tusb_hal_int_disable(uint8_t port);
 
 uint32_t tusb_hal_tick_get(void);