4349 Commits

Author SHA1 Message Date
hathach
3ed5d6c372 complete enumeration 2023-08-24 16:27:12 +07:00
hathach
2c237b1ae4 able to complete 1st get device descriptor and set address 2023-08-23 17:49:28 +07:00
hathach
e3f3179924 able to get 8 byte descriptor, but read(RCVBC) always return 0
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
hathach
274578ff46 able to send setup packet 2023-08-22 23:17:12 +07:00
hathach
b413439416 able to detect new device and start enumerating 2023-08-22 19:57:59 +07:00
Hardy Griech
2c1addff4f defined(ECLIPSE_GUI) 2023-08-20 18:27:06 +02:00
Hardy Griech
28107326da bug fix recv/xmit_get_next_ready_ntb() 2023-08-20 18:24:08 +02:00
Hardy Griech
e4c18c101c Copyright 2023-08-20 18:24:01 +02:00
Hardy Griech
d5da303f45 moved some declarations 2023-08-20 18:23:53 +02:00
Hardy Griech
fca08c939c files taken from yapicoprobe 2023-08-20 18:23:32 +02:00
hathach
cacc96b25d adding connection event handling, add nrf gpio interrupt for max2341e interrupt pin 2023-08-18 17:39:10 +07:00
hathach
824e585e2b ground works for hcd max3421e 2023-08-18 14:07:38 +07:00
hathach
9257a0f562 - update nrf52 bsp for cmake
- add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled
- add hcd_template.c
2023-08-18 12:48:12 +07:00
hathach
f4845e4e6c minor comment 2023-08-16 14:43:58 +07:00
hathach
0109ffbdcb fix abort transfer does not release endpoint, also reset state if it is control transfer 2023-08-16 14:31:14 +07:00
hathach
b3c7fe1023 clear qhd halted bit if not caused by STALL protocol, allow for next transfer 2023-08-16 11:12:00 +07:00
Ha Thach
7537985c08 Merge pull request #2222 from rppicomidi/fix-2188
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-15 23:33:19 +07:00
hathach
67a374d932 more rename 2023-08-15 22:57:05 +07:00
hathach
1b33a31536 more minor clean up
- also rename usbh_classdriver.h to usbh_pvt.h to consitent with usbd
2023-08-15 22:54:07 +07:00
rppicomidi
9d94296741 fix issue 2188: support usbh_app_driver_get_cb() 2023-08-14 15:38:48 -07:00
tswan-quasi
b5ba12119d UINT16_MAX stdint macro usage 2023-08-14 09:01:30 -04:00
tswan-quasi
bd51afb091 min on cdc r/w 2023-08-14 08:49:52 -04:00
Hardy Griech
798ff807b3 removed obsolete tud_network_link_state_cb() 2023-08-11 18:04:34 +02:00
Ha Thach
92457ec99f Merge pull request #2202 from Rocky04/patch-4
Invoke unmounted state on configuration reset
2023-08-09 20:48:26 +07:00
Ha Thach
04f0cd5c80 Merge pull request #2209 from HiFiPhile/hitl
Enhance HITL test
2023-08-09 20:20:46 +07:00
hathach
b8b01c1075 update to dcd ip3511 to add work-around for lpc54628 usb hs errata USB.1 and USB.2
msc is mounted, but device couldn't work reliably and got constant reset
due to other errata probably.
2023-08-09 12:47:24 +07:00
Rocky04
427ecbbc53 Bad line break at start 2023-08-08 23:33:47 +02:00
Rocky04
a98b219922 Remove port from SOF callback 2023-08-08 18:14:00 +00:00
Rocky04
0161955c22 Adding support for a SOF callback 2023-08-08 17:48:45 +00:00
hathach
6d877c3170 added cmake for lpc54, update lpc55 2023-08-08 18:50:24 +07:00
Rocky04
9602c06f8d Correcting comments 2023-08-07 21:25:50 +02:00
Rocky04
c959e65edd Fixing wrong callback placement 2023-08-07 21:16:41 +02:00
hathach
4938971aad code format 2023-08-07 20:48:09 +07:00
hathach
18646179d0 fix host msc get maxlun not using aligned section memory 2023-08-07 20:48:08 +07:00
hathach
1f95a417f2 Add tuh_rhport_is_active() and tuh_rhport_reset_bus()
- also improve ehci bus reset
- seperate bus reset delay and contact debouncing delay in enumeration
2023-08-07 20:48:07 +07:00
Aladdin Bakosh
56e52037a8 clean(ra_hcd): fix typos in the hcd library 2023-08-04 12:00:25 +02:00
Ha Thach
1b04db2a77 Merge branch 'master' into master 2023-08-04 11:48:04 +07:00
hathach
ef5bd9ee6c Merge branch 'master' into enhance-bsp 2023-08-04 00:31:12 +07:00
Ha Thach
6d03bb9ffc Merge pull request #2052 from arduino/renesas_ra_hs_rebased
Renesas_RA: add support for board with HS USB port
2023-08-03 20:41:13 +07:00
hathach
a160da1f2b add lpc43 family 2023-08-03 17:19:47 +07:00
hathach
473f37df95 add osal queue name if needed
also mass change configQUEUE_REGISTRY_SIZE = 4
2023-08-03 12:05:21 +07:00
hathach
de8faf8664 Merge branch 'master' into pr2091 2023-08-03 11:09:33 +07:00
hathach
d09604d636 Revert "Name queues for easier FreeRTOS debugging with task- and queue-aware debuggers"
This reverts commit 11fba59319.
2023-08-03 11:07:23 +07:00
Rocky04
9560d0813f Set unmounted on configuration reset 2023-08-02 15:25:08 +02:00
hathach
979bf32266 default class driver log level to CFG_TUH/TUD_LOG_LEVEL allow application to selectively disable usbd/usbh or driver log 2023-08-02 15:34:18 +07:00
Martino Facchin
edee46e794 renesas: host: remove attach_attempt logic 2023-08-01 15:21:31 +02:00
hathach
f04e5108b2 Merge branch 'arduino-renesas_ra_hs_rebased' into renesas_ra_hs_rebased 2023-08-01 17:08:03 +07:00
hathach
04f1a34c39 add rusb2_common.c for dynami irq 2023-08-01 17:03:07 +07:00
Martino Facchin
965627e81c rusb2: move dynamic irq function to c file 2023-08-01 11:41:33 +02:00
hathach
3f788a4e5a enable USBMC for uno r4, add board_init_after_tusb() API
add BOARD_UPPERCASE for board detection
2023-07-31 19:09:40 +07:00