hathach
0ab8829e55
fix segger embbeded studio compile issue
2019-08-31 23:53:10 +07:00
hathach
e909270843
rename bsp of stm32 board
2019-07-19 20:37:38 +07:00
hathach
2e07a09b0d
add makefile support for lpcxpresso1347
2019-05-14 18:34:57 +07:00
hathach
3e1897b943
makefile work with lpc11u68
2019-05-14 17:51:05 +07:00
hathach
64bed848d0
fix #53 use nrfx_usbd_errata.h
2019-04-08 17:36:12 +07:00
hathach
dd9c441a61
samd support suspend and resume. Though cannot distinguish between Suspend and Disconnect
...
should work with #47
2019-04-02 02:14:22 +07:00
hathach
8457d0d14c
add board_button_read()
2019-04-01 18:35:37 +07:00
hathach
18f248b142
remove tusb_hal_millis() usage, less work for porting
2019-03-24 01:19:32 +07:00
hathach
ba1bea5d53
simplify board API, adding stm32f3 discovery
...
- remove board header since it is not used
2019-03-22 22:06:48 +07:00
hathach
6787fbeff0
move lpcopen to its own repo (submodule)
2019-03-20 12:37:25 +07:00
hathach
e49efde730
update ses project file
2019-03-15 18:48:14 +07:00
hathach
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
hathach
ddfc32f5ec
adding segger project for stm32f4
2019-03-10 01:24:13 +07:00
hathach
ae560bd825
fix segger debug with SD
...
- Add macro NO_VTOR_CONFIG
- In Properties -> Debugger -> Debugger Options -> Start From Entry
Point Symbol, set to 'No.' This is because we should enter our
SoftDevice's ResetHandler(), not our applications. For more information,
see RK's comment below.
2019-01-29 17:31:32 +07:00
hathach
c81b56eb45
nrf5x usb init before sd works
2019-01-29 17:05:53 +07:00
hathach
d8b361fdaa
add S140 v6 build config for nrf5x
2019-01-29 14:15:13 +07:00
hathach
d524da0c94
enable all warnings
2018-12-07 14:49:55 +07:00
hathach
2babb50d6c
clean up ses project
2018-12-05 18:03:51 +07:00
hathach
6f3898572d
add role to OSAL_QUEUE_DEF() to disable correct dcd/hcd isr
2018-12-05 17:01:19 +07:00
hathach
dd9c7b4249
lpc40xx device work, moving Chip_USB_Init out of tinyusb
2018-12-05 08:47:23 +07:00
hathach
6c2404ca49
adding ea4088 quickstart, able to blink
2018-12-04 16:32:20 +07:00
hathach
7120e12971
add mcb1800, blink led ok
2018-12-04 13:17:12 +07:00
hathach
ee2deaa3ad
clean up
2018-12-03 21:25:49 +07:00
hathach
bb7123eed1
use lpcopen for ea4357, blinky ok
2018-12-03 21:22:11 +07:00
hathach
cea9abd4d0
clean up lpc13
2018-12-03 19:02:35 +07:00
hathach
5f10584983
moving lpc17xx to use lpcopen
2018-12-03 17:28:38 +07:00
hathach
f898f8f7a4
move lpc_chip_13xx files
2018-12-03 16:38:29 +07:00
hathach
786b04e19d
correct memory placement for lpc13. CDC work well
2018-12-03 16:23:38 +07:00
hathach
5848dd2895
lpc11u use USBSRAM, able to response with 1st request
2018-12-02 02:13:48 +07:00
hathach
89d96b92af
fix lpc11u68 bsp issue, able to blink
2018-12-01 21:58:24 +07:00
hathach
102a761e8e
able to build lpc11u68
2018-12-01 02:17:20 +07:00
hathach
a157c7fdc9
add lpc11u68 ses file
2018-12-01 01:43:57 +07:00
hathach
d246cc2e6c
lpc13xx build ok (not work) with lpcopen
2018-11-30 23:39:18 +07:00
hathach
804c60304e
adding ses lpc13xx
2018-11-30 13:25:58 +07:00
hathach
18ea601b89
update segger project
2018-11-29 20:00:42 +07:00
hathach
3f38c3b4b5
clean up
2018-11-29 12:38:03 +07:00
hathach
a3cc52829b
clean up
2018-11-27 23:55:10 +07:00
hathach
038851c362
enhance dcd lpc17xx. Able to pass enumeration
2018-11-27 20:48:46 +07:00
hathach
138b12b61b
add lpc175x_6x project file
2018-11-26 18:30:50 +07:00
hathach
60d5ac1c39
clean up
2018-11-26 12:31:07 +07:00
hathach
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
hathach
569e85a0c0
cdc work ok with lpc43xx
2018-11-22 17:40:20 +07:00
hathach
b20cb8852a
build ok
2018-11-22 16:49:27 +07:00
hathach
c3c446f7db
adding lpc43xx to ses
2018-11-22 16:28:01 +07:00
hathach
42b97d3c25
rename example project
2018-11-22 11:18:10 +07:00
