hathach
2a814a99af
- hcd_setup_send() also check for busy flag
...
- xact_inout() to support send setup
2023-08-29 20:27:37 +07:00
hathach
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
hathach
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
hathach
502b1bdda6
more update to transaction
2023-08-27 23:45:34 +07:00
hathach
cd7464a884
try next endpoint when received NAK
2023-08-25 17:37:09 +07:00
hathach
ac00b91472
add xact_out(), xact_in() to manage transfer
2023-08-25 17:26:57 +07:00
hathach
ecf2f91042
use endpoint pool for more flexible multiple devices support
2023-08-25 16:36:28 +07:00
hathach
09ceaa6cf3
add osal mutex for spi
2023-08-25 13:18:47 +07:00
hathach
f5ebc1700f
add spi lock with interrupt enable/disable
2023-08-25 12:12:44 +07:00
hathach
e6cf125e53
save data toggle, always retry NAK. work with msc device
2023-08-24 16:46:20 +07:00
hathach
344932d27e
add tuh_max3421e_int_api(), retry control if received NAK
2023-08-24 16:27:47 +07:00
hathach
3ed5d6c372
complete enumeration
2023-08-24 16:27:12 +07:00
hathach
2c237b1ae4
able to complete 1st get device descriptor and set address
2023-08-23 17:49:28 +07:00
hathach
e3f3179924
able to get 8 byte descriptor, but read(RCVBC) always return 0
...
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
