hathach
ad72db5aea
change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code
...
change pipe xfer API buffer from void* to uint8_t*
change FIFO_DEF to have a separated buffer to be compatible with IAR\
refractor IAR data alignment pragma
2014-03-10 13:13:13 +07:00
hathach
f0e705c8da
IAR host freertos works with EA4357
2014-03-06 12:51:16 +07:00
hathach
90b7ead017
refine keyboard host demo (added new line for enter key)
2014-03-02 21:39:18 +07:00
hathach
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
hathach
a1978e20fe
merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h
2014-02-28 15:50:04 +07:00
hathach
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
hathach
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
hathach
bbe26facb3
some code clean up
...
NOTE: host on ea4357 does not work anymore
2014-02-19 15:29:29 +07:00
hathach
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
hathach
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
hathach
fce6252456
hub works with ohci as well. There is some problem when plug & unplug device hmm
2013-12-19 12:21:40 +07:00
hathach
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
hathach
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
hathach
b35d2c8f43
add lpc17xx build config for host demo
2013-12-11 12:13:22 +07:00
hathach
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
hathach
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
hathach
064d0cf5a9
document cdc
2013-10-27 19:59:06 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
15c80a9580
clean up
2013-10-16 12:35:55 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
26f75d6cac
house keeping
2013-09-26 15:35:15 +07:00
hathach
238afb474f
house keeping
2013-09-26 15:15:16 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
52ae0afeb6
refine hid host driver
2013-09-20 16:20:28 +07:00
hathach
d8907c9a2b
IAR host none project working
2013-09-19 18:18:05 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
e4ae45359d
fix bug with RNDIS class open using non-static variable p_cdc
...
fix bug with SUBTASK_EXIT with single if (add do while wrapper)
add payloay message
able to send initialize & wait on notification pipe & get initialize cmpt
2013-07-05 20:21:24 +07:00
hathach
c08c655fd1
implementing initializing for RNDIS
2013-07-05 11:46:12 +07:00
hathach
e94ce81b04
fix compilation error
2013-07-01 10:43:55 +07:00
hathach
a4f7dc1105
add & pass a first few test for cdc host
...
implement cdch_open_subtask
2013-07-01 10:35:37 +07:00
hathach
7e6e5cc356
[CDC]
...
- add configure option
- add include path
- add driver function table
2013-06-29 16:06:45 +07:00
hathach
132c3996ea
move scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2) to hal/hal_lpc43xx.c
...
dual host run without problem with mcb4300
2013-05-23 14:56:11 +07:00
hathach
8cb7818bcc
- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xx
...
- change descriptor.c/h able to build device example
2013-05-23 13:22:46 +07:00
hathach
40503b913b
abstract os priority for application tasks
2013-05-14 21:32:13 +07:00
hathach
fd49cff8e8
add stub for msc host & hub driver
2013-05-06 20:09:06 +07:00
hathach
120db28a17
change format of file header & license spacing
2013-05-06 12:50:19 +07:00
hathach
e9dbce5f1b
add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOS
...
using plain char for error enum character
increase freeRTOS configMAX_PRIORITIES to 16
house keeping & clean up compiler warning
2013-04-25 11:00:56 +07:00
hathach
3f9a73a34d
change config to use USB0 only
...
fix some compiler warnings
2013-04-22 10:44:51 +07:00
hathach
cb4981dd2d
adding host_freertos configure & build etc
2013-04-16 16:30:36 +08:00
hathach
54221bb73b
move code in host demo to /src in prepare for support freeRTOS projects
2013-04-15 17:30:36 +08:00
