I will be porting tinyuf2 to MCXA156 and N947 and need this work in place.
This is the 1st step before bringing in support for other MCX devices.
We had previous patched https://github.com/hathach/mcux-sdk.git' for MCX support as it was not pulically available
I updated get_deps to point to the mcux-sdk version 2.16.10 from NXP. I repointed the entry in the get_deps script to use NXP MCU repo. The existing current code couldn't build as the MCUXpresso SDK was old.
- For now, I put a copy of fsl_spc.c in the drivers folder for the mcx family. None of the ports could build with the version in the mcux github sdk. The sdk on github has version 2.4.0. The SDK package that can be downloaded with the SDK generator uses 2.4.2. All of the clock_config routines use versions of the datastructure from 2.4.2. For now, keeping an updated copy in hw/bsp/mcx/drivers so we can build against the latest mcuxpresso sdk and enable MCXA156. I'll file an issue on the nxp github.
- Cleaned up the MCX family.c a little bit. the MCXA/N these chips don't have SCT so I removed the neopixel code.
- fixed a clock init issue w/ N947 that was causing it to crash when initializing the uart.
- I tested the cmake and make scripts on the A153,A156 and N947 using the CDC/MSC sample. All worked OK.
- Patched get_deps so it will do a fetch/check on a new folder. Some of the deps were failing on a fresh clone of tinyusb
- Fixed lpc51,54 and lpc55 make/cmake files to build with mcuxpresso sdk 2.16.10 The folder structure for flexcomm/uart changed a little bit
- lpc55s59 libpower_hardabi.a no longer is included in mcuxpressosdk, (fsl_power.c is replacement). remove of libpower_hardabi.a from the linker config. LPC55 still works as expected.
- Using tinyuf2 get deps
* try to run arm-iar with circleci with new token
* limit iar ci parallel build to 4 for medium+ and 6 for large
* add hil-hfp to compile and test with IAR
* update build.py script to work with circleci
* build make with circle ci
* build vm for esp only
* nrf imxrt with large resource
* nrf imxrt with large resource
* remove 2 of nrf boards
Initial commit for the port of TUSB to MAX32xxx parts, staring with MAX32690
- Added dcd_max32.c (based on dcd_musb.c) for interfacing with the peripheral
- Added MAX32690 part family support
- Added max32690evkit board support
- Updated examples for unique EP number requirement
- Updated get_deps.py to fetch the MSDK
Known Issues / Additional Testing Required
- msc_dual_lun only shown 1 volume on Windows
- USBTMC does not have a valid Windowsdriver
- DFU does not have a valid Windows driver
- WebUSB is "Device not Recognized"
- Need to test build scripts with IAR and Clang
