andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
220 Commits 2 Branches 0 Tags
44e09cc397df4e7fc47c37a4d967fe17a3d82e16
Commit Graph

56 Commits

Author SHA1 Message Date
hathach
ae9b9ead7a continue clean up ehci 2013-03-23 10:23:37 +07:00
hathach
dbaf6c0d30 - fix bug when unplugged unmounted-already device (mostly plugged when power on) 
- add hal_debugger_is_attached & hal_debugger_breakpoint
- assert will suspend (place breakpoint) if the condition is failed and debugger is attached. Otherwise, a message to uart is printed
- fix get control qhd function when dev_addr is not zero (shifted 1)
- fix wrong logic for unsupported class
 2013-03-22 17:08:51 +07:00
hathach
97c9001d40 add hard fault handler to bsp.c 
rename class_install_subtask to class_open_subtask
add class_close for unmount
adding code for usbh_device_unplugged_isr & invoke it in hcd_isr
 2013-03-13 10:57:30 +07:00
hathach
79e277d323 go through all the enumeration (up to get full configuration) 
- fix init_qhd for address 0 (clear queue head --> ehci controller halted)
- fix bug in usbh_init missing address0 for semaphore create

TUSB_CFG_DEBUG == 3: --> ATTR_ALWAYS_INLINE is null --> allow gcc to export "normal inline" function
 2013-03-13 00:02:45 +07:00
hathach
d2bd80109e add semaphore post in usbh_isr for control pipe 
add osal_queue_send in usbh_device_plugged
add macro for placing breakpoint macros
fix ehci init:
- regs->cmd or (add run_stop)
- enable port power in portsc
add tusb_task_runner in main loop
 2013-03-12 20:04:29 +07:00
hathach
c6b220c327 update keil file 2013-03-12 15:08:35 +07:00
hathach
453ea39865 add project file for keil 
fix binary.h compiler specific
add hal_init code to reset & set usbmode --> able to get USB ISR
remove const qualifier from return function of
- get_operational_register
- get_period_frame_list
- get_async_head
- get_period_head
- get_control_qhd
add stub for
- hcd_port_connect_status
- hcd_port_speed
 2013-03-12 12:06:40 +07:00
hathach
a259be6edf refractor 
- remove TUSB_CFG_HOST_CONTROLLER_START_INDEX
 2013-03-04 18:01:05 +07:00
hathach
e1033b9b3c replace TUSB_CFG_HOST by MODE_HOST_SUPPORTED 
move stuffs around
 2013-03-04 17:07:14 +07:00
hathach
94c004724c allow configure host/device by controller basic 
- make changes to adapt
add mcu_capacity.h
 2013-03-04 16:21:41 +07:00
hathach
0c397c6b8d house keeping 
- correct initialization call sequence
- move hcd_init to ehci.c
 2013-02-27 18:49:28 +07:00
hathach
49da210860 add osal subtask support 
add usbh_control_xfer_subtask as xfer and wait
fix potential error when update device info & open control pipe for new address
fix build error with hal_****.c
add STATIC_ASSSERT to perform compile time checking with sizeof later
update osal_queue_receive and osal_semaphore_wait for osal_none to support subtask
 2013-02-26 17:28:05 +07:00
hathach
489b98cb93 add TUSB_CFG_HOST_CONTROLLER_START_INDEX 
update usbh_init and test code for TUSB_CFG_HOST_CONTROLLER_START_INDEX
clean up some
 2013-02-08 12:12:10 +07:00
hathach
aeccdfde3f remove TUSB prefix for class enum definitions 
add most of HID USAGE TABLE and definitions etc ...
 2013-02-05 13:57:06 +07:00
hathach
9a1bda1633 house keeping 2013-01-27 16:19:18 +07:00
hathach
535f330026 update license year from 2012 to 2013 2013-01-27 13:50:40 +07:00
hathach
7edda37518 add more test code for keyboard hid application API 
refractor, restructure, rename several thing regarding host, keyboard etc ...
 2013-01-26 01:37:15 +07:00
hathach
38ce3f7534 start to support 
- usbd host
- osal

some global define
#define TUSB_CFG_HOST_CONTROLLER_NUM
#define TUSB_CFG_HOST_DEVICE_MAX
#define TUSB_CFG_CONFIGURATION_MAX

rename & refractor HID type structure & enum

use CException to test asssertion library
add test for hid_host_keyboard with usbd configure get & osal queue get stubs
update test for assertion library
refractor ASSERT_STATUS in assertion library
update tusb_error_t values
rename usb basic type & enum in tusb_types.h and std_descriptors.h
 2013-01-22 17:41:06 +07:00
hathach
cfe7a3d23b change error type to lower case for more consistency 
change Error Enum to TUSB prefix for more consistency
start to add check for OS configure
 2013-01-19 00:57:58 +07:00
hathach
d8c8b9e38a add ASSERT POINTER support 
add hid host and separate hid host & device
update host project setting with EA4357 board
add para checking test for hid host
 2013-01-18 14:39:42 +07:00
hathach
25f6cee73b add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver add 
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application
remove power_api.h (mcu dependency)
 2013-01-18 11:49:51 +07:00
hathach
c16632da0b add UART support for ea4357 (tested) 2013-01-17 14:40:46 +07:00
hathach
480ddb4fec start to add bsp and build configuration for embedded artist 4357 2013-01-17 11:03:43 +07:00
hathach
10009cba99 add initial support for output using ITM via SWO (not tested though) 2013-01-17 02:04:47 +07:00
hathach
aae51e985f refractor board and start to add support for SWO retarget 2013-01-17 01:09:58 +07:00
hathach
c004cd4387 add uart for lpc11uxx and retarget successfully 2013-01-16 12:43:17 +07:00
hathach
0cec7910a0 update project setting to have most warning option enable with simple switch on/off (off for faster compiling time) 2013-01-15 14:41:19 +07:00
hathach
6e0818c901 re-target printf to uart successful on LPCXpresso1347 2013-01-11 22:43:54 +07:00
hathach
e935f29541 tested keyboard device with lpcXpresso1347 board 2013-01-11 20:49:46 +07:00
hathach
d76df54003 add external configure file: tusb_config.h 
rename the internal/default configure from tusb_cfg.h to tusb_option.h
 2013-01-11 16:55:47 +07:00
hathach
a6e5197b58 use X Macros to remove #undef in errors. 2013-01-11 16:28:57 +07:00
hathach
83bb44510a update makefile project 
back to use lpcxpresso project file (instead of make target project)
 2013-01-11 16:10:16 +07:00
hathach
1f3c9ed69d start add makefile for keyboard demo 2013-01-10 16:46:52 +07:00
hathach
f4fa62e032 clean up 2012-12-27 02:33:51 +07:00
hathach
a2e1fc4a73 fix device example build errors 2012-12-20 17:13:22 +07:00
hathach
8c2ec83c59 rename macro configure in examples 2012-12-20 16:59:43 +07:00
hathach
ec4a3f6048 cleaning 2012-12-18 15:08:30 +07:00
hathach
e4a69a6f71 running blinking example 2012-12-10 16:10:24 +07:00
hathach
4ec23ea786 add build and project settings for lpc43xx 2012-12-10 15:59:10 +07:00
hathach
3eb7465e5e abstract usb enable/disable interrupt to hal layer 2012-12-10 14:58:25 +07:00
hathach
b52b3b1cef finalize building process. Now I can focus on developing the stack (finally) 2012-12-07 18:09:01 +07:00
hathach
70e3a13951 change building process yes, again 2012-12-07 17:59:46 +07:00
hathach
cd74f4f0ed work with lpc11u37 (lpc11uxx) on kevin's board 2012-12-07 16:22:47 +07:00
hathach
cc45f35d70 fix descriptors for device 2012-12-07 10:53:52 +07:00
hathach
6049b6d0df make fundamental changes in project building 
add some makefile.defs
 2012-12-07 01:31:09 +07:00
hathach
f31ade6151 add board abstract layer 
rename arch to mcu
 2012-12-04 18:18:29 +07:00
hathach
8f00307986 fixed building errors with device example 2012-12-04 11:30:34 +07:00
hathach
6ea85a569a added IAD descriptor 2012-12-03 18:43:35 +07:00
hathach
b698b09a67 fix some doxygen settings and stuffs add prepacked for IAR compiler 2012-12-03 16:51:14 +07:00
hathach
8a1dee1b2e add overview.md and license.md and tinyUSB overview.png 2012-12-02 00:36:44 +07:00