hathach
988edce745
fix build
2019-12-09 18:49:38 +07:00
hathach
208a77678c
clean up, switch and update submodule samd to circuitpython branch
2019-12-09 18:37:54 +07:00
hathach
9a8e6ed93b
added microchip submodule
2019-12-09 18:18:01 +07:00
hathach
69a801c027
change the samd submodule
2019-12-09 17:59:30 +07:00
Ha Thach
88b9a6e84d
Merge pull request #233 from kasjer/kasjer/fix-ymnewt-osal
...
Fix mynewt osal queue definition
2019-12-09 15:32:21 +07:00
Jerzy Kasenberg
4a1f7d0243
Fix mynewt osal queue definition
...
Queue table has pointers instead of data os_event structs.
This resulted in crashes when elements were put to queue and
overwritten variables that were just after mpool desiged
for queue.
2019-12-01 12:38:36 +01:00
Ha Thach
97b90b6fc9
Merge pull request #231 from xobs/fix-fomu-out-rx
...
valentyusb: eptri: don't double-advance read buffer
2019-11-29 17:38:09 +07:00
Sean Cross
26dcc19b18
valentyusb: eptri: don't double-advance read buffer
...
Due to an error, we were double-advancing the FIFO buffer. The end
result was that the second half of most reads were getting ignored.
This wasn't found during earlier testing because only 64-byte buffers
were tested.
This corrects this error by avoiding double-advancing the buffer.
Signed-off-by: Sean Cross <sean@xobs.io >
2019-11-29 18:14:23 +08:00
Ha Thach
acb80dec65
Merge pull request #228 from noebrun/patch-1
...
fix missing source file for cdc_msc to compile
2019-11-29 00:28:55 +07:00
hathach
e9725dcdbe
use dcd_edpt0_status_complete() to prepare for setup packet for samd21/samd51
2019-11-28 13:48:55 +07:00
hathach
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
hathach
ac701c398b
clean up
2019-11-28 12:18:56 +07:00
hathach
552cc3ef33
implement dcd_edpt_stall
2019-11-28 11:56:35 +07:00
hathach
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
hathach
6bc245cb36
add dcd_edpt0_status_complete() which is useful for several mcu port
2019-11-28 11:46:36 +07:00
hathach
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
hathach
6225d5bcfd
able to handle setup packet
2019-11-27 16:01:25 +07:00
hathach
bc21714c7e
detect bus reset
2019-11-27 14:49:19 +07:00
Ha Thach
2e0dcd50ea
Merge pull request #230 from hathach/develop
...
fix #229
2019-11-27 13:44:09 +07:00
hathach
302746d02c
Merge branch 'develop' into port-samg55
2019-11-27 12:35:59 +07:00
hathach
fe1eadf177
fix #229
2019-11-27 12:34:30 +07:00
hathach
8a1b6327ba
extract code to invoke_class_control()
...
- also rename usbd_class_drivers to _usbd_driver
2019-11-27 12:12:52 +07:00
hathach
745f0b4521
clean up
2019-11-27 11:02:24 +07:00
Noe Brun
d7228094fd
missing source file for cdc_msc to compile
2019-11-26 13:51:16 +01:00
hathach
4c9c13c767
add uart sync support
2019-11-26 18:21:46 +07:00
hathach
387384c0d9
fix samg55 with newlib missing end symbol
2019-11-26 17:39:51 +07:00
Ha Thach
6a6f3efd0f
Merge pull request #227 from hathach/develop
...
add CONTRIBUTORS.md
2019-11-25 23:25:20 +07:00
hathach
3a2d63613b
logo design
2019-11-25 22:56:37 +07:00
hathach
13f4223517
add the most important contributor
2019-11-25 21:10:08 +07:00
hathach
7c606563ed
lower case for arturo
2019-11-25 20:52:27 +07:00
hathach
0fccfc647f
update
2019-11-25 13:37:55 +07:00
hathach
168f0cb471
update readme
2019-11-25 13:33:50 +07:00
hathach
a91ac72dbd
add the most important file of the project: CONTRIBUTORS.md
2019-11-25 13:29:42 +07:00
hathach
c691dc4cb2
update
2019-11-25 10:42:32 +07:00
hathach
58e8265964
usb hw init OK
2019-11-24 23:46:28 +07:00
hathach
24b2cea139
Merge branch 'master' into port-samg55
2019-11-24 21:22:42 +07:00
Ha Thach
64b05a1d5f
Merge pull request #225 from xobs/fomu-offset-fix
...
bsp: fomu: fix rom address for example programs
2019-11-24 11:18:53 +07:00
Sean Cross
a106c5114b
bsp: fomu: fix rom address for example programs
...
During development, the ROM address was at offset 0x2001a000
(due to the fact that the test program was located immediately
following the bitstream).
In normal Fomus, the ROM address is at offset 0x20040000, in order
to take into account additional bitstreams and bootloaders.
Correct the address to the offset in order to get examples working
with existing Fomus.
Signed-off-by: Sean Cross <sean@xobs.io >
2019-11-24 01:15:31 +00:00
hathach
ac65e94b86
Merge branch 'develop'
2019-11-24 00:53:31 +07:00
hathach
a3ed87972d
more doc
2019-11-24 00:52:34 +07:00
hathach
2379ce8d65
update doc, RT1011 verified to work, thanks to @arturo182
2019-11-23 21:59:28 +07:00
Ha Thach
15d6f813c2
Merge pull request #224 from hathach/develop
...
added rt1010 board support
2019-11-23 21:53:58 +07:00
hathach
778cff19c1
added rt1010 board support
...
not tested on the actual hardware board though.
2019-11-23 21:18:40 +07:00
Ha Thach
0ee70512ac
Merge pull request #223 from hathach/develop
...
Added board RT1050 EVKB, RT1020 EVK, RT1015 EVK
2019-11-23 01:26:58 +07:00
hathach
9758f3e461
doc update
2019-11-23 01:11:37 +07:00
hathach
a6b1289096
added rt1015 evk board
2019-11-23 01:09:39 +07:00
hathach
d76eb8d659
doc update
2019-11-23 00:51:43 +07:00
hathach
d991466a8e
fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2
2019-11-23 00:48:56 +07:00
hathach
4ecb07afc5
added MIMX RT1052 Evaluation Kit
2019-11-23 00:19:53 +07:00
Ha Thach
98c5084292
Merge pull request #222 from hathach/develop
...
add RT1060 evk board support
2019-11-22 17:59:40 +07:00
