Hardy Griech
51ea467350
removed debug comment
2023-08-31 20:34:12 +02:00
Hardy Griech
92025b00f0
code review: add NCM options in example config
2023-08-31 20:32:42 +02:00
Hardy Griech
1dd9fa3f30
code review: changed to TinyUSB log system
2023-08-31 20:24:56 +02:00
hathach
ed0a233d48
vastly improve attach/detach device, still have issue where thing is still hanged occasionally.
2023-08-31 21:28:27 +07:00
hathach
3b7d5aa042
improve connection & disconnection detection. But there is still issue when CONDETIRQ occurs but we are disabled interrupt (for osal queue access).
2023-08-31 16:52:09 +07:00
hathach
41493426b3
use ep buf to keep setup packet, work well with hid device
2023-08-30 16:21:43 +07:00
hathach
1ab488eb06
call xfer_complete_isr() when result is not successful (stalled or failed)
2023-08-30 16:04:18 +07:00
Alexander Mueller
9665843635
Fix the weak dcd_edpt0_status_complete for Keil Compiler
...
The Keil compiler seems to have different semantics and the defined function was never called.
The same is probably true for the other weak functions. I can change those too.
2023-08-29 18:16:50 +02:00
hathach
2a814a99af
- hcd_setup_send() also check for busy flag
...
- xact_inout() to support send setup
2023-08-29 20:27:37 +07:00
hathach
3740a3287a
- correct tuh_max3421e_int_api() for nrf52
...
- hcd_int_disable/enable is software only to reduce interrupt lag
2023-08-29 18:22:21 +07:00
Ha Thach
9063ede25f
Merge branch 'master' into nxp_k64
2023-08-28 17:46:05 +07:00
hathach
aa0fabd51d
add kinetis_k family and teensy_35
...
- teensy_35 is not able to blink led with board_test though, probably due to clock config.
2023-08-28 17:44:29 +07:00
hathach
588b758717
rename OPT_MCU_KINETIS_K64 to OPT_MCU_KINETIS_K
2023-08-28 17:34:40 +07:00
yuxiaojun
c350616038
fix:Resource leak: fp
...
Signed-off-by: yuxiaojun <yuxiaojun1011@outlook.com >
2023-08-28 15:24:14 +08:00
hathach
b31924e13e
- add xfer_complete_isr()
...
- merge addr0 ep to pool
- add control status to xact in/out
- use atomic flag busy to ensure only 1 transfer is active at any time
- execute pending transfer after one is complete (or clear busy flag)
- change rtt mode to block if full
2023-08-28 12:41:44 +07:00
hathach
84df3b04db
minor update
2023-08-27 23:54:24 +07:00
hathach
502b1bdda6
more update to transaction
2023-08-27 23:45:34 +07:00
hathach
cd7464a884
try next endpoint when received NAK
2023-08-25 17:37:09 +07:00
hathach
ac00b91472
add xact_out(), xact_in() to manage transfer
2023-08-25 17:26:57 +07:00
hathach
ecf2f91042
use endpoint pool for more flexible multiple devices support
2023-08-25 16:36:28 +07:00
hathach
09ceaa6cf3
add osal mutex for spi
2023-08-25 13:18:47 +07:00
hathach
f5ebc1700f
add spi lock with interrupt enable/disable
2023-08-25 12:12:44 +07:00
hathach
e6cf125e53
save data toggle, always retry NAK. work with msc device
2023-08-24 16:46:20 +07:00
hathach
344932d27e
add tuh_max3421e_int_api(), retry control if received NAK
2023-08-24 16:27:47 +07:00
hathach
3ed5d6c372
complete enumeration
2023-08-24 16:27:12 +07:00
Ha Thach
7bf5923052
Merge pull request #2142 from sjanc/symlinks
...
Fix documentation symlinks
2023-08-24 00:01:55 +07:00
hathach
2c237b1ae4
able to complete 1st get device descriptor and set address
2023-08-23 17:49:28 +07:00
hathach
e3f3179924
able to get 8 byte descriptor, but read(RCVBC) always return 0
...
- rename max3421e to max3421
- fix incorrect bitmask for HCTL, fix initial device connect
- fix bus reset cause connect IRQ
2023-08-23 15:08:12 +07:00
hathach
274578ff46
able to send setup packet
2023-08-22 23:17:12 +07:00
hathach
b413439416
able to detect new device and start enumerating
2023-08-22 19:57:59 +07:00
Hardy Griech
2c1addff4f
defined(ECLIPSE_GUI)
2023-08-20 18:27:06 +02:00
Hardy Griech
28107326da
bug fix recv/xmit_get_next_ready_ntb()
2023-08-20 18:24:08 +02:00
Hardy Griech
e4c18c101c
Copyright
2023-08-20 18:24:01 +02:00
Hardy Griech
d5da303f45
moved some declarations
2023-08-20 18:23:53 +02:00
Hardy Griech
fca08c939c
files taken from yapicoprobe
2023-08-20 18:23:32 +02:00
hathach
cacc96b25d
adding connection event handling, add nrf gpio interrupt for max2341e interrupt pin
2023-08-18 17:39:10 +07:00
hathach
824e585e2b
ground works for hcd max3421e
2023-08-18 14:07:38 +07:00
hathach
9257a0f562
- update nrf52 bsp for cmake
...
- add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled
- add hcd_template.c
2023-08-18 12:48:12 +07:00
Ha Thach
1fdf29075d
Merge pull request #2221 from hathach/ehci-halted-error
...
EHCI more fixes
2023-08-16 16:01:16 +07:00
hathach
f4845e4e6c
minor comment
2023-08-16 14:43:58 +07:00
hathach
0109ffbdcb
fix abort transfer does not release endpoint, also reset state if it is control transfer
2023-08-16 14:31:14 +07:00
hathach
b3c7fe1023
clear qhd halted bit if not caused by STALL protocol, allow for next transfer
2023-08-16 11:12:00 +07:00
Ha Thach
7537985c08
Merge pull request #2222 from rppicomidi/fix-2188
...
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-15 23:33:19 +07:00
hathach
67a374d932
more rename
2023-08-15 22:57:05 +07:00
hathach
1b33a31536
more minor clean up
...
- also rename usbh_classdriver.h to usbh_pvt.h to consitent with usbd
2023-08-15 22:54:07 +07:00
rppicomidi
9d94296741
fix issue 2188: support usbh_app_driver_get_cb()
2023-08-14 15:38:48 -07:00
Ha Thach
d713571cd4
Merge pull request #2217 from hathach/add-lpc43s67
...
Add lpc43s67
2023-08-14 22:28:53 +07:00
Ha Thach
ba40d667e1
Merge pull request #2219 from tswan-quasi/master
...
min on cdc r/w
2023-08-14 22:25:44 +07:00
hathach
f2f005cbdf
fix build iar with lpc43
2023-08-14 22:01:30 +07:00
hathach
088180e3d8
add iar support for lpc43, add lpcxpresso43s67 to hil farm
2023-08-14 20:58:00 +07:00
