andy/tinyUSB
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
5,382 Commits 2 Branches 0 Tags
a994540860306e7da80a6925633f1ac8486fbfd9
Commit Graph

81 Commits

Author SHA1 Message Date
hathach
a994540860 fix nrf easy dma race condition 2021-11-23 09:36:28 +07:00
hathach
5af989384b remove ep descriptor wMaxPacketSize bitfield due to endian issue 2021-10-24 13:11:21 +07:00
hathach
0b249618b0 fix -Wcast-qual 2021-10-15 23:54:31 +07:00
hathach
ad21b69277 fix nrf clear data toggle sequence when clearing stall 2021-08-29 12:05:34 +07:00
hathach
66c292e2ec fix a couple of nrf dcd issue 
- limit out xact dma to prevent usbd overflow in certain situation after
stalled
- drained already acked data when stalling an OUT endpoint
 2021-08-29 00:34:21 +07:00
hathach
8bad0af849 explicitly clear stall and data toggle for edpoint upon open() 2021-08-27 22:31:08 +07:00
hathach
81c73c235f implement dcd_edpt_close_all() for nrf52840 2021-08-27 22:30:30 +07:00
hathach
71e77e47fa add dcd_edpt_close_all() for clear existing configured state 
correctly responded to TD 9.13 Set Configuration Test
 2021-08-26 17:07:03 +07:00
hathach
ab2eec77d4 complete suspend, resume, remote wakeup for nrf52 2021-08-16 20:22:14 +07:00
DuMaM
b5ce269675 GCC 11 build fix 
During Adafruit Bootloader compilation, I spotted bellow error which do not allow me build project.

``` c
    inlined from 'hfclk_running' at lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:785:13:
lib/tinyusb/src/portable/nordic/nrf5x/dcd_nrf5x.c:792:31: error: 'is_running' may be used uninitialized [-Werror=maybe-uninitialized]
  792 |     return (is_running ? true : false);
      |            ~~~~~~~~~~~~~~~~~~~^~~~~~~~
```
 2021-06-26 17:03:46 +02:00
hathach
6b621baeb3 fix race condition with control since TASKS_EP0RCVOUT also require EasyDMA 2021-06-19 01:58:27 +07:00
hathach
9233269a2c only apply errata walkaround for nrf52 2021-05-11 18:38:23 +07:00
Jerzy Kasenberg
e2f795067a Allow build for NRF5340 MCU 
Errata code referred to NRF_USBD_BASE.
This definition is not present in NRF5340 but both NRF52 and NRF53
do have NRF_USBD which maps to NRF_USBD_BASE for NRF52 and
to NRF_USBD_S_BASE for NRF5340.
This just make build possible for NRF5340.
 2021-05-11 12:37:08 +02:00
hathach
64f41dea62 fix race condition that could cause drop packet of Bulk OUT transfer 
NRF_USBD->SIZE.EPOUT[epnum] only need to write once to enable
Bulk/Interrupt transfer. We only need to do it in dcd_edpt_open() and
dcd_edpt_clear_stall()
 2021-03-18 15:07:07 +07:00
hathach
6e6e6265e4 use dcd_event_bus_reset() with speed to replace bus_signal 2021-01-08 22:34:36 +07:00
Jerzy Kasenberg
96da1ca4b8 nrf5x: Add support for ISO endpoints 
ISO endpoints were not covered so far by the driver code.
This adds support for ISO IN and OUT endpoint handling.
Registers for ISO IN(OUT) endpoints are placed just after normal IN(OUT)
so in some cases common code could be used for handling all type of
transfers.
Generally code synchronizes ISO endpoint handling to SOF interrupt.
This code does not change the way of how non-ISO endpoints are treated.

Code uses strategy outlined in nRF52840 Produce Specification v1.0
sections 6.35.11.1 and 6.35.11.2.
 2020-10-01 09:22:55 +02:00
Jerzy Kasenberg
6f5ee09511 nrf5x: Increase size of mps to 16 bits 
msp stores max packet size.
For ISO endpoints 8 bits is not enough so it's changed to 16 bits.
 2020-10-01 09:22:55 +02:00
Jerzy Kasenberg
fceb8853c7 nrf5x: Add dcd_edpt_close 
Closing endpoints can be important when there are alternate
instances. This adds functionality of closing endpoints
similar to what exists in other drivers.
 2020-10-01 09:22:55 +02:00
Jerzy Kasenberg
62a76c0e04 nrf52: Fix edpt_dma_start() wrong condition check 
Operator < used in while condition was obviously incorrect.
Loop starts with checking if unsigned variable is less then 0.
This condition is always false.

This reverses condition to follow intention of of the code.
 2020-09-15 16:08:23 +02:00
hathach
7d9efd0697 manually submit unplugged event for nrf dcd_disconnect() 2020-08-04 14:18:12 +07:00
hathach
9bf2b33366 correct isr context for nrf DCD_EVENT_UNPLUGGED 
also rename debug lookup to prevent conflict
 2020-08-01 12:02:59 +07:00
hathach
ff9994116e fix nrf hanged (blocking wait) when called within critical section 2020-05-21 21:22:12 +07:00
hathach
58b99e59d4 detect if SD is actually present on the flash using SD magic 
even with SOFTDEVICE_PRESENT defined, SD may not be present on actual
flash.
 2020-05-05 23:07:56 +07:00
hathach
6f9c256ad0 complete remove dcd_set_config(), fix unit test 2020-04-17 13:52:34 +07:00
hathach
50be9d7c3a mass rename tud/dcd_irq_handler to tud/dcd_init_handler 2020-04-17 12:27:53 +07:00
Ha Thach
04a06ec401 Merge branch 'master' into refactor-irqhandler 2020-04-11 15:49:34 +07:00
hathach
c1f3fbbc03 implement dcd connect/disconnect for samd and nrf 2020-04-09 11:47:02 +07:00
hathach
4179334aca call tud_irq_handler() for all nrf5x board 2020-04-06 17:35:11 +07:00
hathach
c8247f0907 fix zlp for nrf52840 2020-03-08 14:20:28 +07:00
hathach
4008f0d1e6 update dcd nrf5x to be indepent from nrf_usbd.h 
fix build error with nrfx 2.0
 2019-11-11 00:01:12 +07:00
hathach
47cd08d526 clean up 2019-08-05 22:31:41 +07:00
hathach
d1df041519 nrf5x remove the depenedent on nrfx_power.h 2019-08-05 22:09:37 +07:00
hathach
d211035a0a merge dcd/hal_nrf5x.c into dcd/dcd_nrf5x.c 2019-08-05 21:54:20 +07:00
hathach
73d7ab201e remove dcd_edpt_busy() 2019-06-10 22:29:18 +07:00
hathach
3e6d911ce9 more clean up use inline bit funciton instead of macros 2019-05-14 12:54:29 +07:00
hathach
61ec407752 update license year to 2019 2019-05-14 11:48:05 +07:00
hathach
77bc421359 fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52 2019-05-09 23:31:18 +07:00
hathach
2050778763 clean up 2019-05-01 20:41:26 +07:00
hathach
06e1fac7c5 nrf5x enable suspend after set address, instead of set config 2019-04-02 01:20:34 +07:00
hathach
2cc4ab2aef nrf5x added LOWPOWER when suspend/resume 2019-03-31 23:57:38 +07:00
hathach
eabfc53f38 added tud_suspended() and tud_ready() 2019-03-30 23:01:23 +07:00
hathach
b28cc6ddb1 added dcd_remote_wakeup() stub for all ports 2019-03-30 14:47:11 +07:00
hathach
93a853cd5b usbd add connected, suspended, remote_wakeup 
- remove use of osal_queue_reset
 2019-03-30 02:26:15 +07:00
hathach
1c2beba85c working on suspend and resume 
change dcd_init signature
 2019-03-29 16:23:00 +07:00
hathach
0bdd4bd550 added Suspend and Resume event for nrf5x port 
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
 2019-03-29 01:34:53 +07:00
hathach
1e9848d917 replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall 
- remove dcd_edpt_stalled() from dcd porting
 2019-03-27 16:09:49 +07:00
hathach
4722376654 remove dcd_get_frame_number() 2019-03-27 01:01:48 +07:00
hathach
c211ee19dd migrate license from BSD 3 clause to MIT 2019-03-20 16:11:42 +07:00
hathach
eda56769b9 dcd_set_address include status response, usbd control stall both control in and out 2019-03-13 23:14:48 +07:00
hathach
6f17b4e019 change to dcd_get_frame_number 2018-12-21 12:46:20 +07:00