Devin Auclair
aa860041b8
Add full/high speed compile flag for Microchip SAME70 examples
...
Default is still high speed, but setting
SPEED=high|full work as expected.
`make BOARD=same70_xplained SPEED=full`
Tested with examples/device/cdc_msc
```preformatted
lsusb -v
...
TinyUSB Device:
Product ID: 0x4003
Vendor ID: 0xcafe
Version: 1.00
Serial Number: 0123456789ABCDEF
Speed: Up to 12 Mb/s <------ full speed here
Manufacturer: TinyUSB
Location ID: 0x03142130 / 12
Current Available (mA): 500
Current Required (mA): 100
Extra Operating Current (mA): 0
Media:
Mass Storage:
Capacity: 8 KB (8,192 bytes)
Removable Media: Yes
BSD Name: disk5
Logical Unit: 0
Partition Map Type: Unknown
S.M.A.R.T. status: Verified
USB Interface: 2
```
2025-02-14 11:06:54 -05:00
Ha Thach
9d2fd6c4ac
Merge pull request #2984 from HiFiPhile/preset
...
Add CMake presets.
2025-02-14 11:29:33 +07:00
hathach
3560ed3d98
remove board_mcu.h
2025-02-11 21:55:28 +07:00
HiFiPhile
1208f88b6e
Sort list (bettter for Clion)
...
Signed-off-by: HiFiPhile <admin@hifiphile.com >
2025-02-09 18:40:30 +01:00
HiFiPhile
09bce3532c
Add CMake presets.
...
Signed-off-by: HiFiPhile <admin@hifiphile.com >
2025-02-09 00:25:38 +01:00
hathach
efd2934919
fix build for 407blackvet
2025-02-06 12:19:29 +07:00
HiFiPhile
67f0d610e5
Merge branch 'master' into master
2025-01-27 19:27:47 +01:00
hathach
8c7998b0e9
fix ci
2025-01-25 22:24:00 +07:00
hathach
6b3a5957c2
cmake remove EXAMPLE-tinyusb target as library
2025-01-25 16:08:40 +07:00
hathach
dc514c6230
use board alias for pca10056
2025-01-25 15:12:57 +07:00
hathach
1003aba690
use board alias for pca10056
2025-01-25 12:39:08 +07:00
hathach
13856af935
add -DRTOS=zephyr to ci west build
2025-01-25 12:19:24 +07:00
hathach
b53801a8ac
add cmake RTOS=zephyr (default noos) for zephyr build
2025-01-24 15:06:05 +07:00
hathach
201b9707b9
try build zephyr with ci
2025-01-24 11:54:42 +07:00
hohoho
5ca3822830
stm32: fix conditional compilation error when not using uart
2025-01-23 19:56:57 +01:00
hathach
9f45e25b1c
msc_dual_lun and cdc_msc work with zephyr on pca10056
2025-01-24 00:39:48 +07:00
hathach
0162d6ab32
kind of work with zephyr with pca10056 with cmake -DBUILD_ZEPHYR
2025-01-23 17:35:05 +07:00
hathach
31071ccf0e
kind of work with zephyr with pca10056 with cmake -DBUILD_ZEPHYR
2025-01-23 17:10:48 +07:00
hathach
6080f89f3d
- change to use CMAKE_SYSTEM_CPU to prevent CMAKE_SYSTEM_PROCESSOR conflict with zephyr
...
- change tinyusb CMakeLists.txt to function tinyusb_target_add() instead of defining tinyusb lib target
2025-01-22 22:31:08 +07:00
hathach
91214b4614
zephyr
2025-01-21 16:28:29 +07:00
hathach
5b32df5abd
add s3 undefined speed note for racing issue with reset.
...
fix dcd_event_sof() with frame number
2025-01-20 22:47:32 +07:00
hathach
824793a428
move mcu supported to README.rst, separated supported boards to boards.rst
2024-12-27 11:34:35 +07:00
hathach
6a36c74b10
embed metadata to family.c and board.h to generate supported boards doc
2024-12-27 09:11:09 +07:00
hathach
22a6777c2d
enable CFG_TUD/THU_MEM_DCACHE_ENABLE for imxrt with M7 by default
2024-12-17 20:53:50 +07:00
hathach
a39e30db92
Merge branch 'refs/heads/master' into fork/HiFiPhile/rt1170
2024-12-17 11:16:27 +07:00
hathach
7e207e4f4a
fix warning due to bsp_rom_registers.c
2024-12-16 23:48:44 +07:00
hathach
656772fc9d
make sure g_bsp_rom_registers is not dropped by linker in cmake build.
...
always reserve 0x100 for option setting in linker to prevent possible bricked mcu
2024-12-16 22:03:06 +07:00
hathach
380bfc0a63
fix portenta build, added core-m85.cmake/mk
2024-12-13 18:16:19 +07:00
hathach
0785daecc1
update build for ra8m1: usbfs work, but usbhs not working just yet. Probably missing configuration or clock setup
2024-12-13 17:28:45 +07:00
hathach
c79890c359
ra8m1_ek led and button works
2024-12-13 12:50:51 +07:00
hathach
4b39ecc519
update make build for ra
2024-12-13 08:53:54 +07:00
hathach
ec2f2f3523
rasc for portenta_c33
2024-12-12 23:50:50 +07:00
hathach
4d1f945096
rasc ra2a1_ek, but usb does not seem to work. Note fsp.ld need extra 0x100 byte for ROM registers to work.
2024-12-12 23:31:16 +07:00
hathach
ec1c8b99e2
rasc for ra4m1_ek
2024-12-12 16:30:09 +07:00
hathach
f294400a11
rasc for ra4m3 ek
2024-12-12 16:21:47 +07:00
hathach
8f2b1bc7b9
used pin generated by rasc
2024-12-12 16:07:30 +07:00
hathach
69dd473a4c
more migrate to ra smart configurator
2024-12-12 13:17:15 +07:00
hathach
29fa07d2ad
Merge branch 'master' into fork/HiFiPhile/rt1170
2024-12-11 15:10:12 +07:00
hathach
b5e84d26c2
change ra bsp to match fsp generated directory
2024-12-10 22:17:18 +07:00
hathach
6cc2c98daf
correct clock setting for h563 nucleo
2024-12-06 16:12:19 +07:00
HiFiPhile
f934224351
Fix cmake options.
...
Signed-off-by: HiFiPhile <admin@hifiphile.com >
2024-11-30 22:26:33 +01:00
HiFiPhile
0074ed7c67
Add bin & hex output to cmake targets.
2024-11-30 21:50:50 +01:00
HiFiPhile
c41d9db3b1
Merge branch 'master' into rt1170
...
Signed-off-by: HiFiPhile <admin@hifiphile.com >
2024-11-30 18:05:04 +01:00
HiFiPhile
486e14ea9b
Fix CI.
2024-11-30 18:03:16 +01:00
hathach
f090b64227
enable ci for stm32c0, fix build issue with video example and clang
2024-11-27 23:00:49 +07:00
David (Pololu)
568c785da1
Add support for the STM32C0 and the NUCLEO-C071RB.
2024-11-27 22:28:32 +07:00
Ha Thach
dbc2c8d972
Fix missing protoype warning, change TUD_EPBUF_TYPE_DEF order ( #2889 )
...
* change TUD_EPBUF_TYPE_DEF order
* add and fix -Wmissing-prototypes warnings for cmake (skip make)
2024-11-27 18:28:12 +07:00
hathach
453d69517b
fix multiple flag on compiling
2024-11-27 11:10:06 +07:00
hathach
67e92e6688
add TUH_EPBUF_DEF for cdc host
2024-11-26 22:07:28 +07:00
hathach
be25aa31f6
hcd dwc2 add dcache support, usbh correctly use cache line size with TUH_EPBUF_DEF
2024-11-26 10:20:38 +07:00
