hathach
86f6588c3f
update example to work with featherwing max3421, set max3421 GPIO0 for vbus
...
tested with feather nrf52840, m0, m4
2023-11-20 22:09:38 +07:00
hathach
1f71625a32
add tuh_max3421_reg_read(), tuh_max3421_reg_read() for application usage
...
added max3241 for feather m4 and tested
2023-11-20 21:31:06 +07:00
hathach
fbf64b122d
switch freertos to static allocation only (dynamic = 0), since it is possible now with latest freertos cmake
2023-11-16 22:12:38 +07:00
hathach
936551ebd1
update rt1170 evk with led and button, but usb not working yet
2023-11-16 21:35:12 +07:00
hathach
759f70f092
update teensy 4.0 and 4.1 (not tested)
2023-11-16 20:43:02 +07:00
hathach
68f1841e3c
update rt1060 and rt1064 evk
2023-11-16 20:28:41 +07:00
hathach
baa1b4ec20
correct and tested rt1050 evkb
2023-11-16 20:12:08 +07:00
hathach
2ff08aceec
update rt1050 (not tested)
2023-11-16 20:05:27 +07:00
hathach
882da9944d
update rt1024 evk
2023-11-16 18:23:48 +07:00
hathach
794dbf923a
updat rt1020
2023-11-16 17:33:33 +07:00
hathach
f9bdc8ad22
update rt1015 evk
2023-11-16 17:19:15 +07:00
hathach
fe2a759159
update metro m7 airlift and sd
2023-11-16 17:01:43 +07:00
hathach
d13d79acfe
update imxrt1010 with mex
2023-11-16 16:54:43 +07:00
hathach
2e924f727f
add imxrt1170 evkb
2023-11-16 15:38:55 +07:00
hathach
9ffb20429a
add metro m7 1011 sd with trace etm, try to enable but not working yet
2023-11-16 12:32:35 +07:00
Ha Thach
0f187b4d1c
Merge pull request #2317 from hathach/add-ra2a1-ek
...
add ra2a1 ek
2023-11-15 16:35:13 +07:00
hathach
e0d632a954
add ra2a1 ek
...
also make some other changes
2023-11-15 16:07:44 +07:00
Jerzy Kasenberg
c9f09d6079
Add BSP for nucleo-g491re
...
This adds bsp for ST nucleo-g491re board.
This is mostly copy of nucleo-f474 only differences being:
- PLL configured to 170MHz (not affecting USB which runs on HSI48)
- Linker script freshly generated from STM32CubeIDE (smaller RAM)
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl >
2023-11-13 17:38:19 +01:00
hathach
89475fcf26
add unique id for u5, also allow to build with OPT_OS_CUSTOM
2023-11-02 19:32:25 +07:00
HiFiPhile
de02748504
Update make
2023-10-31 21:29:07 +01:00
HiFiPhile
bf2e54e3d3
Add STM32F4 OTG_FS pin to BSP.
2023-10-31 20:46:55 +01:00
HiFiPhile
86f00f6b49
Fix STM32F7 OTG_HS GPIO alt mapping.
2023-10-31 20:45:06 +01:00
Ha Thach
4c01c5a714
Merge pull request #2300 from hathach/add-u5a5
...
Add support for stm32u5a5 (highspeed with built-in femtoPHY)
2023-10-31 13:27:54 +07:00
hathach
3e140756dc
update stm32u5xx_hal_driver, fix build with old u575 board
2023-10-31 12:08:45 +07:00
hathach
6ab7875aab
uart working on u5a5
2023-10-31 11:39:20 +07:00
hathach
db3ff4b352
usb on u5a5 hs work well with correct VBVALEXTOEN/VBVALOVAL set
2023-10-31 11:26:31 +07:00
hathach
9f0223dccd
minor clean up
2023-10-31 10:58:15 +07:00
hathach
a4c542a7b4
addd dwc2_info.py/md update stm32u5a5 board clock & power configure, able to get passed otg clock reset
2023-10-30 22:21:58 +07:00
hathach
9cba9a753b
update s3 devkitm with max3421 pin following metro s3, check max3421 version to make sure it is valid
2023-10-27 17:40:53 +07:00
hathach
27a2c8cba4
adding nulceo stm32u5a5, fix clock configure issue
...
dwc2 core stuck at reset
2023-10-18 18:43:07 +07:00
hathach
5025e80c9e
adding u5a5 nucleo
2023-10-18 15:27:06 +07:00
hathach
a5a77af11e
add board.mk for u575 nucleo
2023-10-17 23:53:09 +07:00
hathach
22aefd6aba
add cmake support for u575 nucleo
2023-10-17 22:48:54 +07:00
Ha Thach
80ee307244
Merge branch 'master' into feat-stm32u575_nucleo
2023-10-17 22:31:33 +07:00
hathach
cfb683f481
tested with nrf52840 and esp32s2
2023-10-05 17:01:41 +07:00
hathach
67e34267a6
change tuh_max3421_spi_xfer_api() signature
...
tested working with sam d21 and d51, not tested with nrf52, seem not
working with esp32
2023-10-04 18:00:32 +07:00
hathach
f36e0b7b92
esp32 comment out uart, increase max3421 spi speed to 26mhz
2023-10-03 16:27:35 +07:00
hathach
8348631bf5
improve esp32 ci, build esp32 with -DDMAX3421_HOST=1 for max3421 testing
...
revert change in hcd.h
2023-09-28 16:15:31 +07:00
hathach
6b8933cfe8
fix build with new freertos host example
2023-09-28 12:55:59 +07:00
hathach
7dc1a66f91
esp32 cdc host with max3421 work well
2023-09-28 11:12:22 +07:00
hathach
10abece264
esp32 hid device work well
2023-09-28 10:06:10 +07:00
hathach
3a10b6a3d5
fix esp32 build
2023-09-27 18:09:19 +07:00
hathach
76c43a5bdc
Merge branch 'master' into add-max3421-esp32
2023-09-27 17:52:18 +07:00
Ha Thach
68c4009bba
Merge branch 'master' into add-in_isr-to-hcd_int_hanlder
2023-09-27 17:01:40 +07:00
hathach
58c49cea5b
remove sct_neopixel from lpc54 (due to warnings and not used)
2023-09-27 16:31:46 +07:00
hathach
0a4fb6963d
fix build with lpc54
2023-09-27 16:19:39 +07:00
hathach
3b0ffd0f48
change hcd_int_handler(rhport, in_isr) signature: add in_isr
...
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
2023-09-27 15:51:03 +07:00
hathach
6dc64eaa28
max3421 communication work with esp32 up to enumeration, seems still have a bit of issue
2023-09-27 12:34:45 +07:00
hathach
2f6592de7f
update max3421 to have hcd_int_handler_ext()
2023-09-27 11:30:18 +07:00
hathach
f6ca86c3dd
tested cdc_msc_hid_freertos with samd51
...
add -Wno-error=format for espressif
wrap up cdc_msc_hid_freertos
2023-09-26 19:09:36 +07:00
